-- Module IN-SSF-SCF-datatypes (Q.1248.2:07/2001)
-- See also ITU-T Q.1248.2 (07/2001)
-- See also the index of all ASN.1 assignments needed in this document
IN-SSF-SCF-datatypes {itu-t recommendation q 1248 modules(1)
in-ssf-scf-datatypes(6) version1(0)} DEFINITIONS IMPLICIT TAGS ::=
BEGIN
IMPORTS
common-classes, common-datatypes, ssf-scf-classes, scf-srf-classes,
scf-srf-datatypes, tc-Messages
FROM IN-object-identifiers {itu-t recommendation q 1248 modules(1)
in-object-identifiers(0) version1(0)}
COMMON-BOUNDS
FROM IN-common-classes common-classes
TRIGGER, SCF-SSF-BOUNDS
FROM IN-SSF-SCF-Classes ssf-scf-classes
SCF-SRF-BOUNDS
FROM IN-SCF-SRF-Classes scf-srf-classes
Extensions{}, Integer4
FROM IN-common-datatypes common-datatypes
InformationToSend{}
FROM IN-SCF-SRF-datatypes scf-srf-datatypes;
-- The following three definitions are local short-hand notation for convenience.
B1 ::=
COMMON-BOUNDS -- defined in Q.1248.1 (Part 1 of Recommendation Q.1248)
B2 ::= SCF-SSF-BOUNDS -- defined in this Recommendation (Q.1248.2)
B3 ::= SCF-SRF-BOUNDS -- defined in Q.1248.3 (Part 3 of Recommendation Q.1248)
AALParameters{B2:b2} ::=
OCTET STRING(SIZE (b2.&minAALPLength..b2.&maxAALPLength))
-- Indicates the AAL Parameters Information Element. Refer to Q.2931 for encoding.
AccessCode{B2:b2} ::=
LocationNumber{b2}
-- An access code from a business group dialling plan attendant access codes, access codes to escape
-- to the public network, access code to access a private facility/network, and feature access codes.
-- Uses the LocationNumber format which is based on the Q.763 Location Number format.
-- The Nature of Address indicator field shall be set to "Spare" (value 00000000).
-- The Numbering Plan Indicator field shall be set to "Spare" (value 000).
-- Of local significance.
AChBillingChargingCharacteristics{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minAChBillingChargingLength..
b2.&maxAChBillingChargingLength))
-- The AChBillingChargingCharacteristics parameter specifies the charging related information
-- to be provided by the SSF and the conditions on which this information has to be reported
-- back to the SCF with the ApplyChargingReport operation.
-- Different set of criteria may be provided in case more than one report is expected.
-- Its content is network operator specific.
-- Examples of charging related information to be provided by the SSF may be: bulk counter
-- values, costs, tariff change and time of charge, time stamps, durations, etc.
-- Examples of conditions on which the charging related information are to be reported may be:
-- threshold value reached, timer expiration, tariff change, end of connection configuration, etc
ActionIndicator ::= ENUMERATED {activate(1), deactivate(2), retrieve(3)
}
-- indicates the action to be performed by the ManageTriggerData operation (activate, deactivate
-- or retrieve the status of a TDP.
ActionOnProfile ::= ENUMERATED {activate(0), deactivate(1)}
-- Indicates whether a setServiceProfile operation is used to activate or deactivate profile elements.
ActionPerformed ::= ENUMERATED {
activated(1), deactivated(2), alreadyActive(3), alreadyInactive(4),
isActive(5), isInactive(6), tDPunknown(7)}
-- indicates the result of the operation ManageTriggerData
-- activated: response of activate TDP
-- deactivated: response of deactivate TDP
-- alreadyActive: response of activate TDP
-- alreadyInactive: response of deactivate TDP
-- isActive: response of retrieve status of TDP
-- isInactive: response of retrieve status of TDP
AdditionalATMCellRate{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minAdditionalATMCellRateLength..
b2.&maxAdditionalATMCellRateLength))
-- Indicates the AdditionalATMCellRate Information Element. Refer to Q.2763 for encoding.
AdditionalCallingPartyNumber{B2:b2} ::=
Digits{b2}
-- Indicates the Additional Calling Party Number. Refer to Q.763 for encoding.
AESACalledParty{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minAESACalledPartyLength..b2.&maxAESACalledPartyLength))
-- Indicates the AESACalledParty Information Element. Refer to Q.2763 for encoding.
AESACallingParty{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minAESACallingPartyLength..b2.&maxAESACallingPartyLength))
-- Indicates the AESACallingParty Information Element. Refer to Q.2763 for encoding.
AlertingPattern ::= OCTET STRING(SIZE (3))
-- Indicates a specific pattern that is used to alert a subscriber (e.g. distinctive ringing, tones, etc.).
-- Only the trailing OCTET is used, the remaining OCTETS should be sent as NULL (zero)
-- The receiving side ignores the leading two OCTETS.
-- Only applies if SSF is the terminating local exchange for the subscriber.
-- Refer to the Q.931 Signal parameter for encoding.
AlternativeIdentities{B2:b2} ::=
SEQUENCE (SIZE (1..b2.&maxAlternativeIdentities)) OF AlternativeIdentity
AlternativeIdentity ::= CHOICE {
url [0] IA5String(SIZE (1..512)) -- any RFC1738 compliant URL (e.g.; SIP URL)
}
--Email addresses shall be represented as URLs.
AlternativeATMTrafficDescriptor{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minAlternativeATMTrafficDescriptorLength..
b2.&maxAlternativeATMTrafficDescriptorLength))
-- Indicates the AlternativeATMTrafficDescriptor Information Element. Refer to Q.2931 for encoding.
ApplicationTimer ::= INTEGER(0..2047)
-- Used by the SCF to set a timer in the SSF. The timer is in seconds.
AssistingSSPIPRoutingAddress{B2:b2} ::=
Digits{b2}
-- Indicates the destination address of the SRF for the assist procedure.
ATMCellRate{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minATMCellRateLength..b2.&maxATMCellRateLength))
-- Indicates the ATMCellRate Information Element. Refer to Q.2763 for encoding.
BackwardGVNS{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minBackwardGVNSLength..b2.&maxBackwardGVNSLength))
-- Indicates the GVNS Backward information. Refer to Q.735 for encoding.
BackwardServiceInteractionInd ::= SEQUENCE {
conferenceTreatmentIndicator [1] OCTET STRING(SIZE (1)) OPTIONAL,
-- acceptConferenceRequest 'xxxx xx01'B
-- rejectConferenceRequest 'xxxx xx10'B
-- network default is accept conference request,
callCompletionTreatmentIndicator [2] OCTET STRING(SIZE (1)) OPTIONAL,
-- acceptCallCompletionServiceRequest 'xxxx xx01'B,
-- rejectCallCompletionServiceRequest 'xxxx xx10'B
-- network default is accept call completion service request
holdTreatmentIndicator [3] OCTET STRING(SIZE (1)) OPTIONAL,
-- acceptHoldRequest 'xxxx xx01'B
-- rejectHoldRequest 'xxxx xx10'B
-- network default is accept hold request
ectTreatmentIndicator [4] OCTET STRING(SIZE (1)) OPTIONAL,
-- acceptEctRequest 'xxxx xx01'B
-- rejectEctRequest 'xxxx xx10'B
-- network default is accept ect request
...
}
BasicGapCriteria{B2:b2} ::= CHOICE {
calledAddressValue [0] Digits{b2},
gapOnService [2] GapOnService,
gapAllInTraffic [3] NULL,
calledAddressAndService
[29] SEQUENCE {calledAddressValue [0] Digits{b2},
serviceKey [1] ServiceKey,
...},
callingAddressAndService
[30] SEQUENCE {callingAddressValue [0] Digits{b2},
serviceKey [1] ServiceKey,
locationNumber [2] LocationNumber{b2} OPTIONAL,
...}
}
-- Both calledAddressValue and callingAddressValue can be
-- incomplete numbers, in the sense that a limited amount of digits can be given.
--
-- For the handling of numbers starting with the same digit string refer to the detailed procedure
-- description of the CallGap operation.
BCSMEvent{B2:b2} ::= SEQUENCE {
eventTypeBCSM [0] EventTypeBCSM,
monitorMode [1] MonitorMode,
legID [2] LegID OPTIONAL,
dpSpecificCriteria [30] DpSpecificCriteria{b2} OPTIONAL
}
-- Indicates the BCSM Event information for monitoring.
BearerCapability{B2:b2} ::= CHOICE {
bearerCap
[0] OCTET STRING(SIZE (2..b2.&maxBearerCapabilityLength)),
tmr [1] OCTET STRING(SIZE (1)),
broadbandBearerCap
[2] OCTET STRING
(SIZE (b2.&minBroadbandBearerCapabilityLength..
b2.&maxBroadbandBearerCapabilityLength))
}
-- Indicates the type of bearer capability connection to the user. For narrow-band bearerCapability, either
-- DSS 1 (Q.931) or the ISUP User Service Information (Q.763) encoding can be used. Refer
-- to the Q.763 Transmission Medium Requirement parameter for tmr encoding.
-- For broadband ISDN: Indicates the Broadband Bearer Capability. Refer to Q.2961 for encoding.
BISDNParameters{B2:b2} ::= SEQUENCE {
aALParameters [0] AALParameters{b2} OPTIONAL,
additionalATMCellRate [1] AdditionalATMCellRate{b2} OPTIONAL,
aESACalledParty [2] AESACalledParty{b2} OPTIONAL,
aESACallingParty [3] AESACallingParty{b2} OPTIONAL,
alternativeATMTrafficDescriptor
[4] AlternativeATMTrafficDescriptor{b2} OPTIONAL,
aTMCellRate [5] ATMCellRate{b2} OPTIONAL,
cDVTDescriptor [6] CDVTDescriptor{b2} OPTIONAL,
cumulativeTransitDelay [7] CumulativeTransitDelay{b2} OPTIONAL,
endToEndTransitDelay [8] EndToEndTransitDelay{b2} OPTIONAL,
minAcceptableATMTrafficDescriptor
[9] MinAcceptableATMTrafficDescriptor{b2} OPTIONAL,
...
}
-- Special construct used to gather all B-ISDN specific parameters
BothwayThroughConnectionInd ::= ENUMERATED {
bothwayPathRequired(0), bothwayPathNotRequired(1)}
-- Indicates whether the speech path must be established both way when user interaction takes place.
CalledDirectoryNumber{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCalledDirectoryNumberLength..
b2.&maxCalledDirectoryNumberLength))
-- Indicates the Called Directory Number. Refer to Q.763 'Called Directory Number' for encoding.
CalledPartyBusinessGroupID ::= OCTET STRING
-- Indicates the business group of the called party. The value of this octet string is network
-- operator specific.
CalledPartyNumber{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCalledPartyNumberLength..
b2.&maxCalledPartyNumberLength))
-- Indicates the Called Party Number.. Refer to Q.763 for encoding.
CalledPartySubaddress{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCalledPartySubaddressLength..
b2.&maxCalledPartySubaddressLength))
-- Indicates the Called Party Subaddress. . Refer to Q.763 for encoding.
CDVTDescriptor{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCDVTDescriptorLength..b2.&maxCDVTDescriptorLength))
-- Indicates the CDVTDescriptor Information Element. Refer to Q.2763 for encoding.
CallingGeodeticLocation{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCallingGeodeticLocationLength..
b2.&maxCallingGeodeticLocationLength))
-- The coding of this parameter is based on the appropriate mapping with the ISUP parameter Calling Geodetic Location.
-- Refer to Q.763 for encoding.
-- This parameter indicates the geograhic coordinate of a calling party. The excessive amount of data possible
-- within this parameter may require segmentation of the INAP operation to be-sent to the SCF.
-- The amount of data possible to be conveyed within this parameter from
-- the SSF -to the SCF could be limitted, for example it may be considered to only support a relevant subset of all the
-- shape descriptions. This is to be considered in the next Capability Set.
CallingPartyBusinessGroupID ::= OCTET STRING
-- Indicates the business group of the calling party. The value of this octet string is network
-- operator specific.
CallingPartyNumber{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCallingPartyNumberLength..
b2.&maxCallingPartyNumberLength))
-- Indicates the Calling Party Number. Refer to Q.763 for encoding.
CallingPartySubaddress{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCallingPartySubaddressLength..
b2.&maxCallingPartySubaddressLength))
-- Indicates the Calling Party Subaddress. . Refer to Q.763 for encoding.
CallingPartysCategory ::= OCTET STRING(SIZE (1))
-- Indicates the type of calling party (e.g. operator, payphone, ordinary subscriber).
-- Refer to Q.763 for encoding
CallProcessingOperation ::= ENUMERATED {
aLERTing(1), sETUP(5), cONNect(7), dISConnect(69), rELease(77),
rELeaseCOMPlete(90), fACility(98)}
CallReference{B2:b2} ::= OCTET STRING(SIZE (1..b2.&maxCallReferenceLength))
-- The coding of this parameter is network specific.
-- A possible coding is the Q.763 call reference
-- but other encoding schemes are possible.
-- The Call Reference value is unique within one network. When transit through a private
-- network the uniqueness of the call reference parameter is not maintained
CallResult{B2:b2} ::=
OCTET STRING(SIZE (b2.&minCallResultLength..b2.&maxCallResultLength))
-- This parameter provides the SCF with the charging related information previously requested
-- using the ApplyCharging operation. This shall include the partyToCharge parameter as
-- received in the related ApplyCharging operation to correlate the result to the request
-- The remaining content is network operator specific.
-- Examples of charging related information to be provided by the SSF may be: bulk counter values,
-- costs, tariff change and time of change, time stamps, durations, etc.
-- Examples of conditions on which the charging related information are to be reported may be:
-- threshold value reached, timer expiration, tariff change, end of connection configuration, etc.
CallSegmentID{B2:b2} ::= INTEGER(1..b2.&numOfCSs)
Carrier{B2:b2} ::=
OCTET STRING(SIZE (b2.&minCarrierLength..b2.&maxCarrierLength))
-- Contains the carrier selection field (first octet) followed by either Carrier ID information (option 1) , or the Transit
--Network selection information (option 2), depending on the network.
-- In both cases, the Carrier selection is one octet and is encoded as:
-- 00000000 No indication
-- 00000001 Selected carrier code pre subscribed and not input by calling party
-- 00000010 Selected carrier identification code pre subscribed and input by calling party
-- 00000011 Selected carrier identification code pre subscribed, no indication of whether input by calling party
-- 00000100 Selected carrier identification code not pre subscribed and input by calling party
-- 00000101
-- 00000101
-- to Reserved
-- 00001001
-- 00001010 Carrier selected by input from calling party
-- 00001011 Carrier selected by a network operator
-- 00001100
-- to spare
-- 11111110
-- 00001011 Reserved
-- For the first option, Carrier ID has a one octet field indicating the number of digits followed by the digits encoded
-- using BCD. Detailed coding is outside the scope of this capability set. It is of local significance and carrying
-- it through the ISUP is outside the scope of this capability set
-- For the second option, refer to Q.763 for the TNS encoding.
--Note that this ASN.1 encoding of this parameter includes 2 possible encodings, referred to as option 1 and option 2.
--The encoding that should be used is dependent on the network. It is a hard-coded decision based
-- on the region in which the switch is located.
Cause{B2:b2} ::=
OCTET STRING(SIZE (b2.&minCauseLength..b2.&maxCauseLength))
-- Indicates the cause for interface related information. Refer to the Q.763 Cause parameter for encoding
-- For the use of cause and location values refer to Q.850.
CCSS ::= BOOLEAN
-- Used by the SSF to indicate CCSS (Call Completion on Service Set-up) if set to "True" to the SCF,
-- i.e. that the current call is due a special procedure (CCBS or CCNR).
CGEncountered ::= ENUMERATED {
noCGencountered(0), manualCGencountered(1), sCPOverload(2)}
-- Indicates the type of automatic call gapping encountered, if any.
ChargeNumber{B2:b2} ::=
LocationNumber{b2}
-- Information sent in either direction indicating the chargeable number for the call and consisting
-- of the odd/even indicator, nature of address indicator, numbering plan indicator, and address signals.
-- Uses the LocationNumber format which is based on the Q.763 Location Number format
-- For example, the ChargeNumber may be a third party number to which a call is billed for the 3rd party billing
-- service. In this case, the calling party may request operator assistance to charge the call to,
-- for example, their home number.
ChargingEvent{B2:b2} ::= SEQUENCE {
eventTypeCharging [0] EventTypeCharging{b2},
monitorMode [1] MonitorMode,
legID [2] LegID OPTIONAL
}
-- This parameter indicates the charging event type and corresponding monitor mode and LedID
CNInfo{B2:b2} ::= OCTET STRING(SIZE (1..b2.&maxCNInfoLength))
-- encoding of cNInfo is similar to the NNI specific information in the APP parameter in Q.765.1
-- first octet contains Q.765.1 CNID indicator, only bit 5 and 6 are significant. This is followed by zero to 12 octets
-- that contains the Q.765.1 CNID parameter, i.e. the Corporate Telecommunications Network Identifier , if present.
-- This implies that the recommended maxCNInfoLength becomes 13 octets.
Component ::= CHOICE {
componentInfo [0] OCTET STRING(SIZE (1..118)),
-- Contains the operation value (object identifier), error value, etc. within the UNI APDU, in addition also contain
-- the parameter set/sequence for the operation invocation/return result ot return error/reject on UNI. See Q.932
-- for encoding
relayedComponent [1] EMBEDDED PDV
}
-- If componentInfo is chosen, then it is necessary to use this parameter in sequence with ComponentType and
-- ComponentCorrelationID
-- If relayedComponent is chosen, then ComponentType and ComponentCorrelationID may not be used in the
-- sequence
ComponentCorrelationID ::= INTEGER
ComponentType ::= ENUMERATED {
any(0), invoke(1), rResult(2), rError(3), rReject(4)}
-- Type of component in a Facility information element
CompoundCriteria{B2:b2} ::= SEQUENCE {
basicGapCriteria [0] BasicGapCriteria{b2},
scfID [1] ScfID{b2} OPTIONAL
}
-- Allows to combine basic gap criteria with the SCF identifier.
ConnectedNumberTreatmentInd ::= ENUMERATED {
noINImpact(0), presentationRestricted(1), presentCalledINNumber(2),
presentCalledINNumberRestricted(3)}
ConnectionIdentifier{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minConnectionIdentifierLength..
b2.&maxConnectionIdentifierLength))
-- Indicates the ConnectionElementIdentifier Information Element. Refer to Q.2763 for encoding.
ControlType ::= ENUMERATED {
sCPOverloaded(0), manuallyInitiated(1), destinationOverload(2)
-- other values are outside the scope of this capability set.
}
CorrelationID{B2:b2} ::= Digits{b2}
-- used by SCF for correlation with a previous operation. Refer to clause 11 for a description of the procedures
-- associated with this parameter.
CounterAndValue ::= SEQUENCE {
counterID [0] CounterID,
counterValue [1] Integer4
}
CounterID ::= INTEGER(0..9)
-- Indicates the counters to be incremented The counterIDs can be addressed by using the last digits of the dialed number.
CountersValue{B2:b2} ::=
SEQUENCE SIZE (0..b2.&numOfCounters) OF CounterAndValue
CreateOrRemoveIndicator ::= ENUMERATED {create(0), remove(1)}
CSAID{B2:b2} ::= INTEGER(1..b2.&numOfCSAs)
-- Indicates the SSF CSA identifier
CUG-Interlock ::= OCTET STRING(SIZE (4)) -- See Q.763 for encoding
CUG-Index ::=
IA5String(SIZE (1..4))
(FROM ("0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9"))
CumulativeTransitDelay{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minCumulativeTransitDelayLength..
b2.&maxCumulativeTransitDelayLength))
-- Indicates the CumulativeTransitDelay Information Element. Refer to Q.2763 for encoding.
CutAndPaste ::= INTEGER(0..2)
-- Indicates the number of leading digits to be deleted (cut) and to paste remaining dialed digits.
DateAndTime ::= OCTET STRING(SIZE (6))
-- Indicates, amongst others, the start time for activate service filtering. Coded as YYMMDDHHMMSS
-- with each digit coded BCD
-- The first octet contains YY and the remaining items are sequenced following
-- For example, 1998 September 30th, 12:15:01 would be encoded as:
-- Bits HGFE DCBA
-- leading octet 8 9
-- 9 0
-- 0 3
-- 2 1
-- 5 1
-- 1 0
-- For a system operating when or after this Recommendation is released, the 2 digit value
-- representing a Year shall be interpreted as follows
-- If the two-digits value is 00 through 49 inclusive, it shall be interpreted as representing
-- year 2000 through 2049.
-- If the two-digits value is 50 through 99 inclusive, it shall be interpreted as representng
-- year 1950 through 1999.
DefaultFaultHandling{B2:b2, B3:b3} ::= SEQUENCE {
action [0] ENUMERATED {resumeCallProcessing(0), releaseCall(1), ...
},
treatment [1] GapTreatment{b2, b3} OPTIONAL,
...
}
-- Indicates the default SSF behaviour in case a service cannot be triggered (e.g;. due to call gapping) or
-- no valid answer is received from the SCF.
DestinationIndex{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minDestinationIndexLength..b2.&maxDestinationIndexLength))
-- Indicates a pointer to a destination. Its content is network operator specific
DestinationRoutingAddress{B2:b2} ::=
SEQUENCE SIZE (1..b2.&numOfAddresses) OF CalledPartyNumber{b2}
-- Indicates the list of Called Party Numbers (primary and alternates).
Digits{B2:b2} ::=
OCTET STRING(SIZE (b2.&minDigitsLength..b2.&maxDigitsLength))
-- Indicates the address signalling digits. Refer to the Q.763 Generic Number and Generic Digits parameter
-- for encoding. The coding of the subfield's 'NumberQualifier' in Generic Number and 'TypeOfDigits' in
-- Generic Digits are irrelevant to the INAP, the ASN.1 tags are sufficient to identify the parameter.
-- The ISUP format does not allow to exclude these subfields, therefore the value is network operator specific.
-- The following parameters should use Generic Number
-- Additional Calling Number, CorrelationID for AssistRequestInstructions, AssistingSSPIPRoutingAddress
-- for EstablishTemporaryConnection
-- calledAddressValue for all occurrences,callingAddressValue for all occurrences
-- The following parameters should use Generic Digits: prefix, all
-- other CorrelationID occurrences, dialledNumber filtering criteria, callingLineID filtering criteria, lineID for
-- ResourceID type, digitResponse for ReceivedInformationArg, iNServiceControlLow / iNServiceControlHigh for
--MidCallInfoType,, iNServiceControlCode for MidCallInfo.
DisplayInformation{B2:b2} ::=
IA5String
(SIZE (b2.&minDisplayInformationLength..
b2.&maxDisplayInformationLength))
-- Indicates the display information
-- Delivery of DisplayInformation parameter to Private Networks cannot be guaranteed due to signalling
-- interworking problems, solutions are outside the scope of this capability set.
DpSpecificCommonParameters{B1:b1, B2:b2} ::= SEQUENCE {
serviceAddressInformation [0] ServiceAddressInformation,
bearerCapability [1] BearerCapability{b2} OPTIONAL,
calledPartyNumber [2] CalledPartyNumber{b2} OPTIONAL,
callingPartyNumber [3] CallingPartyNumber{b2} OPTIONAL,
callingPartysCategory [4] CallingPartysCategory OPTIONAL,
iPSSPCapabilities [5] IPSSPCapabilities{b2} OPTIONAL,
iPAvailable [6] IPAvailable{b2} OPTIONAL,
iSDNAccessRelatedInformation
[7] ISDNAccessRelatedInformation{b2} OPTIONAL,
cGEncountered [8] CGEncountered OPTIONAL,
locationNumber [9] LocationNumber{b2} OPTIONAL,
serviceProfileIdentifier [10] ServiceProfileIdentifier OPTIONAL,
terminalType [11] TerminalType OPTIONAL,
extensions [12] Extensions{b1} OPTIONAL,
chargeNumber [13] ChargeNumber{b2} OPTIONAL,
servingAreaID [14] ServingAreaID{b2} OPTIONAL,
serviceInteractionIndicators
[15] ServiceInteractionIndicators{b2} OPTIONAL,
iNServiceCompatibilityIndication
[16] INServiceCompatibilityIndication{b2} OPTIONAL,
serviceInteractionIndicatorsTwo
[17] ServiceInteractionIndicatorsTwo OPTIONAL,
uSIServiceIndicator [18] USIServiceIndicator{b2} OPTIONAL,
uSIInformation [19] USIInformation{b2} OPTIONAL,
forwardGVNS [20] ForwardGVNS{b2} OPTIONAL,
createdCallSegmentAssociation [21] CSAID{b2} OPTIONAL,
...,
ipRelatedInformation [22] IPRelatedInformation{b2} OPTIONAL
}
-- OPTIONAL for iPSSPCapabilities, iPAvailable, and cGEncountered denotes network operator specific use
-- OPTIONAL for callingPartyNumber, and callingPartysCategory
-- . bearerCapability should be appropriately coded as speech.
DpSpecificCriteria{B2:b2} ::= CHOICE {
numberOfDigits [0] NumberOfDigits,
applicationTimer [1] ApplicationTimer,
midCallControlInfo [2] MidCallControlInfo{b2},
numberOfDigitsTwo
[3] SEQUENCE {requestedNumberOfDigits [0] NumberOfDigits,
minNumberOfDigits [1] NumberOfDigits OPTIONAL
}
}
-- The SCF may specify the number of digits to be collected by the SSF for the CollectedInfo event
-- When all digits are collected, the SSF reports the event to the SCF
-- The SCF may set a timer in the SSF for the No Answer event. If the user does not answer the call
--within the allotted time, the SSF reports the event to the SCF
-- The SCF may specify the number of digits to be collected by the SSF for the
-- CollecteInfo event and hereby specify a minimum number of digits to be collected in case
-- the exact number of digits is unknown to the SCF, but a report is desired in case of complete number
-- is determined before the requested number of digits has been collected.
Duration ::= INTEGER(-2..86400)
-- Values are seconds. The interpetationof value 0 depends on the context where it is used..
-- A duration of -1 indicates an infinite duration.
-- A duration of -2 indicates a network specific duration.
EndToEndTransitDelay{B2:b2} ::=
OCTET STRING(SIZE (b2.&minEndToEndTDLength..b2.&maxEndToEndTDLength))
-- Indicates the MaximunEndToEndTransitDelay Information Element. Refer to Q.2763 for encoding.
Entry ::= CHOICE {
agreements [0] OBJECT IDENTIFIER,
networkSpecific [1] Integer4
}
-- Identifies a class of service for IN service compatibility procedures.
EventSpecificInformationBCSM{B2:b2} ::= CHOICE {
collectedInfoSpecificInfo
[0] SEQUENCE {calledPartynumber [0] CalledPartyNumber{b2},
...},
analysedInfoSpecificInfo
[1] SEQUENCE {calledPartynumber [0] CalledPartyNumber{b2},
...},
routeSelectFailureSpecificInfo
[2] SEQUENCE {failureCause [0] Cause{b2} OPTIONAL,
...},
oCalledPartyBusySpecificInfo
[3] SEQUENCE {busyCause [0] Cause{b2} OPTIONAL,
...},
oNoAnswerSpecificInfo
[4] SEQUENCE {...,
cause [0] Cause{b2} OPTIONAL},
oAnswerSpecificInfo
[5] SEQUENCE {backwardGVNS [0] BackwardGVNS{b2} OPTIONAL,
...},
oMidCallSpecificInfo
[6] SEQUENCE {connectTime [0] Integer4 OPTIONAL,
oMidCallInfo [1] MidCallInfo{b2} OPTIONAL,
...},
oDisconnectSpecificInfo
[7] SEQUENCE {releaseCause [0] Cause{b2} OPTIONAL,
connectTime [1] Integer4 OPTIONAL,
...},
tBusySpecificInfo
[8] SEQUENCE {busyCause [0] Cause{b2} OPTIONAL,
...},
tNoAnswerSpecificInfo
[9] SEQUENCE {...,
cause [0] Cause{b2} OPTIONAL},
tAnswerSpecificInfo
[10] SEQUENCE {-- no specific info defined
...},
tMidCallSpecificInfo
[11] SEQUENCE {connectTime [0] Integer4 OPTIONAL,
tMidCallInfo [1] MidCallInfo{b2} OPTIONAL,
...},
tDisconnectSpecificInfo
[12] SEQUENCE {releaseCause [0] Cause{b2} OPTIONAL,
connectTime [1] Integer4 OPTIONAL,
...},
oTermSeizedSpecificInfo
[13] SEQUENCE {-- no specific info defined
...},
oSuspend
[14] SEQUENCE {-- no specific info defined
...},
tSuspend
[15] SEQUENCE {-- no specific info defined
...},
origAttemptAuthorized
[16] SEQUENCE {-- no specific info defined
...},
oReAnswer
[17] SEQUENCE {-- no specific info defined
...},
tReAnswer
[18] SEQUENCE {-- no specific info defined
...},
facilitySelectedAndAvailable
[19] SEQUENCE {-- no specific info defined
...},
callAccepted
[20] SEQUENCE {-- no specific info defined
...},
oAbandon
[21] SEQUENCE {abandonCause [0] Cause{b2} OPTIONAL,
...},
tAbandon
[22] SEQUENCE {abandonCause [0] Cause{b2} OPTIONAL,
...},
authorizeRouteFailure
[23] SEQUENCE {authoriseRouteFailureCause [0] Cause{b2} OPTIONAL,
...},
terminationAttemptAuthorized
[24] SEQUENCE {-- no specific info defined
...},
originationAttemptDenied
[25] SEQUENCE {originationDeniedCause [0] Cause{b2} OPTIONAL,
...},
terminationAttemptDenied
[26] SEQUENCE {terminationDeniedCause [0] Cause{b2} OPTIONAL,
...},
oModifyRequestSpecificInfo
[40] SEQUENCE {aTMCellRate [0] ATMCellRate{b2} OPTIONAL,
additionalATMCellRate
[1] AdditionalATMCellRate{b2} OPTIONAL,
...},
oModifyResultSpecificInfo
[41] SEQUENCE {modifyResultType
[0] ModifyResultType DEFAULT modifyAcknowledge,
aTMCellRate [1] ATMCellRate{b2} OPTIONAL,
additionalATMCellRate
[2] AdditionalATMCellRate{b2} OPTIONAL,
...},
tModifyRequestSpecificInfo
[42] SEQUENCE {aTMCellRate [0] ATMCellRate{b2} OPTIONAL,
additionalATMCellRate
[1] AdditionalATMCellRate{b2} OPTIONAL,
...},
tModifyResultSpecificInfo
[43] SEQUENCE {modifyResultType
[0] ModifyResultType DEFAULT modifyAcknowledge,
aTMCellRate [1] ATMCellRate{b2} OPTIONAL,
additionalATMCellRate
[2] AdditionalATMCellRate{b2} OPTIONAL,
...}
}
-- Indicates the call related information specific to the event.
-- The unit for the connectTime is 100 milliseconds
EventSpecificInformationCharging{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minEventSpecificInformationChargingLength..
b2.&maxEventSpecificInformationChargingLength))
-- defined by network operator.
-- Its content is network signalling/operator specific.
-- Indicates the charging related information specific to the event.
-- An example data EmbeddedType definition for this parameter is given below:
-- chargePulses [0] Integer4,
-- chargeMessages [1] OCTET STRING (SIZE (min..max))
EventTypeBCSM ::= ENUMERATED {
origAttemptAuthorized(1), collectedInfo(2), analysedInformation(3),
routeSelectFailure(4), oCalledPartyBusy(5), oNoAnswer(6), oAnswer(7),
oMidCall(8), oDisconnect(9), oAbandon(10), termAttemptAuthorized(12),
tBusy(13), tNoAnswer(14), tAnswer(15), tMidCall(16), tDisconnect(17),
tAbandon(18), oTermSeized(19), oSuspend(20), tSuspend(21), origAttempt(22),
termAttempt(23), oReAnswer(24), tReAnswer(25),
facilitySelectedAndAvailable(26), callAccepted(27),
authorizeRouteFailure(28), originationAttemptDenied(29),
terminationAttemptDenied(30), oModifyRequest(100), oModifyResult(101),
tModifyRequest(102), tModifyResult(103)}
-- Indicates the name of the BCSM detection point event.
-- Notice: Values origAttempt and termAttempt can only be used for TDPs
-- The value range 100- 127 is reserved for bearer related events
EventTypeCharging{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minEventTypeChargingLength..
b2.&maxEventTypeChargingLength))
-- This parameter indicates the charging event type. .
-- Its content is network signalling / operator specific.
-- An example data type definition for this parameter is given below:
-- EventTypeCharging EmbeddedType ::= ENUMERATED {
-- chargePulses (0),
-- chargeMessages (1)
-- }
FacilityGroup ::= CHOICE {
trunkGroupID [0] INTEGER,
privateFacilityID [1] INTEGER,
huntGroup [2] OCTET STRING,
routeIndex [3] OCTET STRING
}
-- Indicates the particular group of facilities to route the call. huntGroup and routeIndex are encoded as
-- network operator specific.
FacilityGroupMember ::= INTEGER
-- Indicates the specific member of a trunk group or multi-line hunt group.
FCIBillingChargingCharacteristics{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minFCIBillingChargingLength..
b2.&maxFCIBillingChargingLength))
-- This parameter indicates the billing and/or charging characteristics.
-- Its content is network operator specific.
-- An example datatype definition for this parameter is given below:
-- FCIBillingChargingCharacteristicsEmbeddedType ::= CHOICE {
-- completeChargingrecord [0] OCTET STRING (SIZE (min..max)),
-- correlationID [1] CorrelationID,
-- scenario2Dot3 [2] SEQUENCE {
-- chargeParty [0] LegID OPTIONAL,
-- chargeLevel [1] OCTET STRING (SIZE (min..max)) OPTIONAL,
-- chargeItems [2] SET OF Attribute OPTIONAL
-- }
-- }
-- Depending on the applied charging scenario the following information elements can be included
-- (refer to Q.1214 Appendix II):
-- complete charging record (scenario 2.2)
-- charge party (scenario 2.3)
-- charge level (scenario 2.3)
-- charge items (scenario 2.3)
-- correlationID (scenario 2.4)
FeatureCode{B2:b2} ::=
LocationNumber{b2}
-- The two-digit feature code preceded by "*" or "11".
-- Uses the LocationNumber format which is based on the Q.763 Location Number format.
-- The Nature of Address indicator field shall be set to "Spare" (value 00000000).
-- The Numbering Plan Indicator field shall be set to "Spare" (value 000)
-- Used for stimulus signalling (Q.932).
FeatureRequestIndicator ::= ENUMERATED {
hold(0), retrieve(1), featureActivation(2), spare1(3), sparen(127)}
-- Indicates the feature activated (e.g. a switch-hook flash, feature activation). Spare values reserved
-- for future use.
FilteredCallTreatment{B2:b2, B3:b3} ::= SEQUENCE {
sFBillingChargingCharacteristics [0] SFBillingChargingCharacteristics{b2},
informationToSend [1] InformationToSend{b2, b3} OPTIONAL,
maximumNumberOfCounters [2] MaximumNumberOfCounters{b2} OPTIONAL,
releaseCause [3] Cause{b2} OPTIONAL,
...
}
-- If releaseCause is not present, the default value is the same as the ISUP cause value decimal 31.
-- If informationToSend is present, the call will be released after the end of the announcement
-- with the indicated or default releaseCause.
-- If maximumNumberOfCounters is not present, ServiceFilteringResponse will be sent with
-- CountersValue::= SEQUENCE SIZE (0) OF CountersAndValue.
FilteringCharacteristics ::= CHOICE {
interval [0] INTEGER(-1..32000),
numberOfCalls [1] Integer4
}
-- Indicates the severity of the filtering and the point in time when the ServiceFilteringResponse is to be sent.
-- If = interval, every interval of time the next call leads to an InitialDP and a ServiceFilteringResponse is sent to
-- the SCF.
-- An interval of 0 indicates that all calls matching the filtering criteria will result in sending of an "InitialDP" or a DP-specific
-- operation and no filtering will be applied (i.e. no "ServiceFilteringResponse will be sent).
-- An interval of -1 indicates that none of the calls matching the filtering criteria will either result in sending of
-- an "InitialDP" or a DP-specific operation or a "ServiceFilteringResponse" operation.
-- Other values of Interval indicate duration in seconds.
-- If = NumberOfCalls, every N calls the Nth call leads to an InitialDP and a ServiceFilteringResponse
-- is sent to the SCF.
-- If ActivateServiceFiltering implies several counters - filtering on several dialled numbers -,
-- the numberOfCalls would include calls to all the dialled numbers.
FilteringCriteria{B2:b2} ::= CHOICE {
dialledNumber [0] Digits{b2},
callingLineID [1] Digits{b2},
serviceKey [2] ServiceKey,
addressAndService
[30] SEQUENCE {calledAddressValue [0] Digits{b2},
serviceKey [1] ServiceKey,
callingAddressValue [2] Digits{b2} OPTIONAL,
locationNumber [3] LocationNumber{b2} OPTIONAL,
...}
}
-- In case calledAddressValue is specified, the numbers to be filtered are from calledAddressValue
-- up to and including calledAddressValue + maximumNumberOfCounters-1.
-- The last two digits of calledAddressvalue can not exceed 100-maximumNumberOfCounters.
FilteringTimeOut ::= CHOICE {
duration [0] Duration,
stopTime [1] DateAndTime
}
-- Indicates the maximum duration of the filtering. When the timer expires, a ServiceFilteringResponse
-- is sent to the SCF.
-- duration of 0 indicates that service filtering is to be removed.
-- duration of -1 indicates an infinite duration.
-- duration of -2 indicates a network specific duration.
-- other values indicate duration in seconds.
ForwardCallIndicators ::= OCTET STRING(SIZE (2))
-- Indicates the Forward Call Indicators. Refer to Q.763 for encoding
ForwardGVNS{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minForwardGVNSLength..b2.&maxForwardGVNSLength))
-- Indicates the GVNS Forward information. Refer to Q.735, §6 for encoding.
ForwardingCondition ::= ENUMERATED {busy(0), noanswer(1), any(2)}
-- Indicates the condition that must be met to complete the connect.
ForwardServiceInteractionInd ::= SEQUENCE {
conferenceTreatmentIndicator [1] OCTET STRING(SIZE (1)) OPTIONAL,
-- acceptConferenceRequest 'xxxx xx01',B
-- rejectConferenceRequest 'xxxx xx10'B
-- network default is accept conference request.
callDiversionTreatmentIndicator [2] OCTET STRING(SIZE (1)) OPTIONAL,
-- callDiversionAllowed 'xxxx xx01'B
-- callDiversionNotAllowed 'xxxx xx10'B
-- network default is Call Diversion allowed.
callOfferingTreatmentIndicator [3] OCTET STRING(SIZE (1)) OPTIONAL,
--indicates if call offering is "allowed"," not allowed" or "no impact by IN"
-- the value 'no impact by IN," has only local significance in SSF as a request to SSF
-- not to modify the value of the call offering treatment indicator conveyed in signaling.
-- callOfferingNotAllowed 'xxxx xx01'B,
-- callOfferingAllowed 'xxxx xx10'B
-- callOfferingNoINImpact 'xxxx x100'B
--indicates if call offering is "allowed"," not allowed" or "no impact by IN".
-- network default is Call Offering not allowed
callWaitingTreatmentIndicator [5] OCTET STRING(SIZE (1)) OPTIONAL,
-- callWaitingAllowed 'xxxx xx01'B,
-- callWaitingNotAllowed 'xxxx xx10'B
-- network default is Call Waiting allowed
-- Notice Tag value 4 is otherwise reserved .
...,
holdTreatmentIndicator [6] OCTET STRING(SIZE (1)) OPTIONAL,
-- acceptHoldRequest 'xxxx xx01'B
-- rejectHoldRequest 'xxxx xx10'B
-- network default is accept hold request
ectTreatmentIndicator [7] OCTET STRING(SIZE (1)) OPTIONAL
-- acceptEctRequest 'xxxx xx01'B
-- rejectEctRequest 'xxxx xx10'B
-- network default is accept ect request
}
--The forwardServiceInteractionInd parameter is applicable to IDP, CON, CWA and ICA operations.
--This parameter can be received either in the O_BCSM or in the T_BCSM.
GapCriteria{B2:b2} ::= CHOICE {
basicGapCriteria BasicGapCriteria{b2},
compoundCapCriteria CompoundCriteria{b2}
}
GapOnService ::= SEQUENCE {
serviceKey [0] ServiceKey,
dpCriteria [1] EventTypeBCSM OPTIONAL,
...
}
GapIndicators ::= SEQUENCE {
duration [0] Duration,
gapInterval [1] Interval,
...
}
-- Indicates the gapping characteristics.
-- A duration of 0 indicates that gapping is to be removed.
-- A duration of -1 indicates an infinite duration.
-- A duration of -2 indicates a network specific duration.
--= Other values indicate duration in seconds.
-- An interval of 0 indicates that service requests meeting the gap criteria are not to be rejected , i.e.
-- No gapping when gapInterval equals 0, and
-- an interval of -1 indicates that all service requests meeting the gap criteria are to be rejected, i.e.
-- gap all calls when gapInterval equals -1 .
--= Other values indicate interval in milliseconds.
GapTreatment{B2:b2, B3:b3} ::= CHOICE {
informationToSend [0] InformationToSend{b2, b3},
releaseCause [1] Cause{b2},
both
[2] SEQUENCE {informationToSend [0] InformationToSend{b2, b3},
releaseCause [1] Cause{b2},
...}
}
-- The default value for Cause is the same as in ISUP.
GenericIdentifier{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minGenericIdentifierLength..
b2.&maxGenericIdentifierLength))
-- Indicates the GenericIdentifier Information Element. Refer to Q.2931 for encoding.
GenericName{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minGenericNameLength..b2.&maxGenericNameLength))
-- Refer to Q.931 Display Information for encoding.
GenericNumber{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minGenericNumberLength..b2.&maxGenericNumberLength))
-- Refer to Q.763 Generic Number for encoding.
GenericNumbers{B2:b2} ::=
SET SIZE (1..b2.&numOfGenericNumbers) OF GenericNumber{b2}
GlobalCallReference{B2:b2} ::=
OCTET STRING(SIZE (1..b2.&maxGlobalCallReferenceLength))
-- Global Call Reference as defined in Q.1902.3
HighLayerCompatibility{B2:b2} ::=
OCTET STRING(SIZE (b2.&highLayerCompatibilityLength))
-- Indicates the teleservice. For encoding, DSS1 (Q.931) is used.
HoldCause ::= OCTET STRING
-- defined by network operator.
-- Indicates the cause for holding a call.
-- Its content is network operator specific
initialCallSegment INTEGER ::=
1
-- the initial call segment represents the call segment that was there when the CSA was created, ie. the CS where
-- the trigger took place or the CS that was created by an InitateCallAttempt within a TC-BEGIN message,
-- unless InitiateCallAttemt was proceeded by a CreateCallSegmanrAssociation operation.
INprofile{B1:b1, B2:b2} ::= SEQUENCE {
actionOnProfile [0] ActionOnProfile,
tDPIdentifier [1] TDPIdentifier{b2},
dPName [2] EventTypeBCSM OPTIONAL,
extensions [3] Extensions{b1} OPTIONAL,
...
}
-- Contains profile elements that can be downloaded in the SSF using the setServiceProfile operation.
INServiceCompatibilityIndication{B2:b2} ::=
SEQUENCE SIZE (1..b2.&numOfInServiceCompatibilityIndLength) OF Entry
-- Identifies a list of service classes triggered during the lifetime of a call
INServiceCompatibilityResponse ::=
Entry
-- Used to override the last entry in INServiceCompatibilityIndication
Interval ::= INTEGER(-1..60000)
-- Units are milliseconds. A -1 value denotes infinite.
IPAvailable{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minIPAvailableLength..b2.&maxIPAvailableLength))
-- defined by network operator.
-- Indicates that the resource is available.
-- Its content is network operator specific
IPRelatedInformation{B2:b2} ::= SEQUENCE {
alternativeCalledPartyIds [0] AlternativeIdentities{b2} OPTIONAL,
alternativeOriginatingPartyIds [1] AlternativeIdentities{b2} OPTIONAL,
alternativeOriginalCalledPartyIds [2] AlternativeIdentities{b2} OPTIONAL,
alternativeRedirectingPartyIds [3] AlternativeIdentities{b2} OPTIONAL,
...
}
-- contains information that are specific to interworking with IP-based networks
IPRoutingAddress{B2:b2} ::=
CalledPartyNumber{b2}
-- Indicates the routing address for the IP.
IPSSPCapabilities{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minIPSSPCapabilitiesLength..
b2.&maxIPSSPCapabilitiesLength))
-- defined by network operator.
-- Indicates the SRF resources available at the SSP.
-- Its content is network operator specific
ISDNAccessRelatedInformation{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minISDNAccessRelatedInfoLength..
b2.&maxISDNAccessRelatedInfoLength))
-- Indicates the destination user network interface related information. Refer to the Q.763 Access
-- Transport parameter for encoding.
LegID ::= CHOICE {sendingSideID [0] LegType,
receivingSideID [1] LegType
}
-- Indicates a reference to a specific party in a call. OPTIONAL denotes network operator specific use
-- with a choice of unilateral ID assignment or bilateral ID assignment.
-- OPTIONAL for LegID also denotes the following:
--when only one party exists in the call, this parameter is not needed (as no ambiguity exists);
--when more than one party exists in the call, one of the following alternatives applies:
-- 1. LegID is present and indicates which party is concerned.
-- 2. LegID is not present and a default value is assumed (e.g. calling party in the case of the
-- ApplyCharging operation).
-- Choice between these two alternatives is kept a network operator option.
-- sendingSideID is used where legID is sent from the SCF to the SSF and
-- receivingSideID is used where SCF receives legID from the SSF.
LegType ::= OCTET STRING(SIZE (1))
leg1 LegType ::= '01'H
leg2 LegType ::= '02'H
LocationNumber{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minLocationNumberLength..b2.&maxLocationNumberLength))
-- Indicates the Location Number for the calling party. Refer to Q.763 (White book) for encoding.
MaximumNumberOfCounters{B2:b2} ::= INTEGER(1..b2.&numOfCounters)
MidCallControlInfo{B2:b2} ::=
SEQUENCE
SIZE (b2.&minMidCallControlInfoNum..b2.&maxMidCallControlInfoNum)
OF
SEQUENCE {midCallInfoType [0] MidCallInfoType{b2},
midCallReportType
[1] ENUMERATED {inMonitoringState(0), inAnyState(1)}
DEFAULT inMonitoringState,
...}
MidCallInfo{B2:b2} ::= SEQUENCE {iNServiceControlCode [0] Digits{b2},
...
}
MidCallInfoType{B2:b2} ::= SEQUENCE {
iNServiceControlCodeLow [0] Digits{b2},
iNServiceControlCodeHigh [1] Digits{b2} OPTIONAL,
...
}
MiscCallInfo ::= SEQUENCE {
messageType [0] ENUMERATED {request(0), notification(1)},
dpAssignment
[1] ENUMERATED {individualBased(0), groupBased(1), switchBased(2)}
OPTIONAL
}
-- Indicates detection point related information.
-- Note: "Switch based "is used with the same meaning as the previous used term "office based"
MinAcceptableATMTrafficDescriptor{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minMinAcceptableATMTrafficDescriptorLength..
b2.&maxMinAcceptableATMTrafficDescriptorLength))
-- Indicates the MinimumAcceptableATMTrafficDescriptor Information Element. Refer to Q.2931 for encoding.
ModifyResultType ::= ENUMERATED {modifyAcknowledge(0), modifyReject(1)
}
-- Indicates whether a bearer modification attempt has been successful or not
MonitoringCriteria ::= CHOICE {
threshold [0] Integer4,
interval [1] Interval
}
-- Indicates the criteria for route monitoring
MonitorMode ::= ENUMERATED {
interrupted(0), notifyAndContinue(1), transparent(2)}
-- Indicates the event is relayed and/or processed by the SSF.
MonitoringTimeOut ::= CHOICE {
duration [0] Duration,
stopTime [1] DateAndTime
}
-- Indicates when a route moniroting procedure shall be stopped.
NumberingPlan ::= OCTET STRING(SIZE (1))
-- Indicates the numbering plan for collecting the user information. Refer to the Q.763 Numbering Plan
-- Indicator field for encoding.
NumberOfDigits ::= INTEGER(1..255)
-- Indicates the number of digits to be collected
OriginalCalledPartyID{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minOriginalCalledPartyIDLength..
b2.&maxOriginalCalledPartyIDLength))
-- Indicates the original called number. d Refer to the Q.763 Original Called Number for encoding.
ProfileIdentifier{B2:b2} ::= CHOICE {
access [0] CalledPartyNumber{b2},
group [1] FacilityGroup
}
-- Please note that 'CalledPartyNumber' is used to address a subscriber access line.
--The data type was reused from the existing types to avoid the definition of a new one.
QoSParameter{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minQoSParameterLength..b2.&maxQoSParameterLength))
-- Indicates the QoS. Refer to Q.2961 for encoding.
Reason{B2:b2} ::=
OCTET STRING(SIZE (b2.&minReasonLength..b2.&maxReasonLength))
-- Its content is network operator specific
RedirectingPartyID{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minRedirectingPartyIDLength..
b2.&maxRedirectingPartyIDLength))
-- Indicates redirecting number. Refer to the Q.763 Redirecting number for encoding.
RedirectionInformation ::= OCTET STRING(SIZE (2))
-- Indicates redirection information. Refer to the Q.763 Redirection Information for encoding.
RedirectReason ::= OCTET STRING(SIZE (1))
-- Indicates redirection reason information. Refer to the "Invoking Pivot Reason" parameter of Q.763 for encoding.
RegistratorIdentifier ::= OCTET STRING
-- Its content is network operator specific
ReportCondition ::= ENUMERATED {statusReport(0), timerExpired(1), canceled(2)
}
-- ReportCondition specifies the cause of sending "StatusReport" operation to the SCF
RequestedInformationList{B2:b2} ::=
SEQUENCE SIZE (1..b2.&numOfInfoItems) OF RequestedInformation{b2}
RequestedInformationTypeList{B2:b2} ::=
SEQUENCE SIZE (1..b2.&numOfInfoItems) OF RequestedInformationType
RequestedInformation{B2:b2} ::= SEQUENCE {
requestedInformationType [0] RequestedInformationType,
requestedInformationValue [1] RequestedInformationValue{b2},
...
}
RequestedInformationType ::= ENUMERATED {
callAttemptElapsedTime(0), callStopTime(1), callConnectedElapsedTime(2),
calledAddress(3), releaseCause(30)}
RequestedInformationValue{B2:b2} ::= CHOICE {
callAttemptElapsedTimeValue [0] INTEGER(0..255),
callStopTimeValue [1] DateAndTime,
callConnectedElapsedTimeValue [2] Integer4,
calledAddressValue [3] Digits{b2},
releaseCauseValue [30] Cause{b2}
}
-- The callAttemptElapsedTimeValue is specified in seconds.
--The unit for the callConnectedElapsedTimeValue is 100 milliseconds
RequestedUTSI{B2:b2} ::= SEQUENCE {
uSIServiceIndicator [0] USIServiceIndicator{b2},
uSImonitorMode [1] USIMonitorMode,
...
}
RequestedUTSIList{B2:b2} ::=
SEQUENCE SIZE (b2.&minRequestedUTSINum..b2.&maxRequestedUTSINum) OF
RequestedUTSI{b2}
ResourceID{B2:b2} ::= CHOICE {
lineID [0] Digits{b2},
facilityGroupID [1] FacilityGroup,
facilityGroupMemberID [2] INTEGER,
trunkGroupID [3] INTEGER
}
-- Indicates a logical identifier for the physical termination resource.
ResourceStatus ::= ENUMERATED {busy(0), idle(1)}
ResponseCondition ::= ENUMERATED {intermediateResponse(0), lastResponse(1)
-- additional values are outside the scope of this capability set
}
-- ResponseCondition is used to identify the reason why ServiceFilteringResponse operation is sent.
RouteCountersValue{B2:b2} ::=
SEQUENCE SIZE (1..b2.&maxNbOfRoutes) OF RouteCountersAndValue{b2}
RouteCountersAndValue{B2:b2} ::= SEQUENCE {
route [0] Route{b2},
counterID [1] CounterID,
counterValue [2] Integer4,
...
}
-- Used to assign a counter to a route for monitoring purposes.
RouteList{B2:b2} ::= SEQUENCE SIZE (1..b2.&maxNbOfRoutes) OF Route{b2}
-- Indicates a list of trunk groups or a list of route index..
Route{B2:b2} ::=
OCTET STRING(SIZE (b2.&minRouteListLength..b2.&maxRouteListLength))
-- Indicates a trunk group or a route index. .
-- Its content is network operator specific
RouteingNumber{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minRouteingNumberLength..b2.&maxRouteingNumberLength))
-- Indicates the Routeing Number. Refer to Q.763 parameter Network Routeing Number for encoding.
ScfID{B2:b2} ::=
OCTET STRING(SIZE (b2.&minScfIDLength..b2.&maxScfIDLength))
-- defined by network operator.
-- Indicates the SCF identity.
-- Used to derive the INAP address of the SCF to establish a connection between a requesting FE
-- and the specified SCF.
-- When ScfID is used in an operation which may cross an internetwork boundary, its encoding must
-- be understood in both networks; this requires bilateral agreement on the encoding.
-- Refer to 3.5/Q.713 "calling party address" parameter for encoding.
-- It indicates the SCCP address e.g. Global Title of the SCF,.
-- Other encoding schemes are also possible as a network specific option..
SCIBillingChargingCharacteristics{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minSCIBillingChargingLength..
b2.&maxSCIBillingChargingLength))
-- This parameter indicates the billing and/or charging characteristics.
-- Its content is network signalling / operator specific
-- An example datatype definition for this parameter is given below:
-- SCIBillingChargingCharacteristicsEmbeddedType ::= CHOICE {
-- chargeLevel [0] OCTET STRING (SIZE (min..max),
-- chargePulses [1] Integer4,
-- chargeMessages [2] OCTET STRING (SIZE (min..max)
-- }
-- Depending on the applied charging scenario the following information elements
-- can be included (refer to Q.1214 Appendix II):
-- chargeLevel (scenario 3.2)
-- chargePulses (scenario 3.2)
-- chargeMessages (scenario 3.2)
SDSSinformation{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minSDSSinformationLength..b2.&maxSDSSinformationLength))
-- Its content is network operator specific
ServiceAddressInformation ::= SEQUENCE {
serviceKey [0] ServiceKey OPTIONAL,
miscCallInfo [1] MiscCallInfo,
triggerType [2] TriggerType OPTIONAL,
...
}
-- Information that represents the result of trigger analysis and allows the SCF to choose the appropriate service logic
ServiceInteractionIndicators{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minServiceInteractionIndicatorsLength..
b2.&maxServiceInteractionIndicatorsLength))
-- Indicators which are exchanged between SSF and SCF to resolve interactions between IN based services
-- and network based services, respectively between different IN based services.
-- Its content is network signalling/operator specific
-- Note this parameter is kept in this Recommendation for backward compatibility to IN CS-1R,
-- for this Recommendation see parameter ServiceInteractionIndicatorsTwo
ServiceInteractionIndicatorsTwo ::= SEQUENCE {
forwardServiceInteractionInd [0] ForwardServiceInteractionInd OPTIONAL,
-- applicable to operations IDP, CON, ICA, CWA.
backwardServiceInteractionInd
[1] BackwardServiceInteractionInd OPTIONAL,
--applicable to operations IDP, CON, CTR, ETC, CWA.
bothwayThroughConnectionInd [2] BothwayThroughConnectionInd OPTIONAL,
-- applicable to operations CTR, ETC.
suspendTimer [3] SuspendTimer OPTIONAL,
-- applicable to operations CON, ICA CWA.
connectedNumberTreatmentInd [4] ConnectedNumberTreatmentInd OPTIONAL,
--applicable to operations CON, CTR, ETC, CWA .
suppressCallDiversionNotification [5] BOOLEAN OPTIONAL,
-- applicable to CON, ICA, CWA
suppressCallTransferNotification [6] BOOLEAN OPTIONAL,
-- applicable to CON, ICA, CWA
allowCdINNoPresentationInd [7] BOOLEAN OPTIONAL,
-- applicable to CON, ICA CWA
-- indicates whether the Address Presentation restricted indicator of the ISUP
-- "called IN number" shall be set to presentation allowed (TRUE)
-- or presentation restricted (FALSE). Refer to Rec. Q.1601.
userDialogueDurationInd [8] BOOLEAN DEFAULT TRUE,
-- applicable to operations CTR, ETC.
-- applicable when interaction with the user is required during call set-up
-- The interaction TRUE means the user interaction may last longer than 90 seconds.
-- Otherwise the indicator should be set to FALSE. Used for delaying ISUP T9 timer.
overrideLineRestrictions [9] BOOLEAN DEFAULT FALSE,
-- only applicable to operations (e.g. Connect) which lead to a transition to a PIC before
-- the AuthorizeCallSetup PIC.
-- When set to TRUE, this parameter indicates that some facility restrictions
-- should not be checked when the authority to place a call is verified in the
--Authorize_Call_Setup PIC.
-- Which restrictions are actually overwriden is network specific.
suppressVPNAPP [10] BOOLEAN DEFAULT FALSE,
-- applicable to CWA, CON, ICA.
-- indicates whether to allow or stop (suppress) the forward transmission of the VPN PSS1 capability.
-- When set to TRUE, the exchange, on receipt of this parameter, will not transmit for this call
-- any ISUP Application transport parameter with Application Context Identifier set to " PSS1 ASE (VPN) "
-- This indicator is populated by the SCF, where the SCF and SSF in conjunction have provided the
-- outgoing gateway PINX functionality as required by PSS1.
calledINNumberOverriding [11] BOOLEAN OPTIONAL,
-- applicable to CON and CWA
-- indicates whether the generation/override of the ISUP
-- "called IN number" is allowed (TRUE) or not allowed (FALSE)
-- If set to FALSE, the ISUP shall not generate a "called IN number" or override
-- an already existing "called IN number".
-- if absent , the default will be "generation/overriding allowed" (TRUE).
redirectServiceTreatmentInd
[12] SEQUENCE {redirectReason [0] RedirectReason OPTIONAL,
...} OPTIONAL,
--applicable to operation CON .
--if absent , call redirection service is not allowed
--Existence of this parameter requests Pivot Routing or Redirection supplementary service to be
--allowed for-the new routing address specified in the Connect operation.
--If absent, neither Pivot Routing nor Redirection service is allowed.
-- The redirectReason Parameter indicates the reason for invoking Pivot Routing / Redirection service
-- Whether the service is actually invoked depends only on SSF conditions.
--In this capability set the SCF will not know all the SSF conditions.
-- To send that kind of conditions is out of scope of this capability set.
--If the service is allowed, the parameter must be sent in the ISUP-FAC message (Pivot Routing case)
-- or ISUP-REL message (Redirection case) as the service is invoked,
nonCUGCall [13] NULL OPTIONAL,
-- applicable to CON and CWA
-- This parameter when present, indicates that no parameters for CUG shall be used for the call
-- (i.e. the call shall be a non-CUG call). This parameter when not present, indicates
-- one of three things:
-- a) continue with modified CUG information (when one or more of either CUG Interlock Code and
-- Outgoing Access Indicator are present); or
-- b) continue with original CUG information (when neither CUG Interlock Code or Outgoing Access Indicator
-- are present).
-- c) continue with the original non-CUG call.
...
}
-- ServiceInteractionIndicatorsTwo contains Indicators which are exchanged between SSF and SCF to resolve interactions
--between IN based services and network based services, respectively between different IN based services.
ServiceKey ::=
Integer4
-- Information that allows the SCF to choose the appropriate service logic.
ServiceProfileIdentifier ::= OCTET STRING
-- Indicates a particular ISDN terminal. Refer to Q.932 for encoding.
ServingAreaID{B2:b2} ::=
LocationNumber{b2}
-- Identifies the local serving area where a network provider operates. Uses the LocationNumber
-- format which is based on the Q.763 Location Number format.
-- The Nature of Address indicator field shall be set to "Spare" (value 00000000).
-- The Numbering Plan Indicator field shall be set to "Spare" (value 000).
-- Defined by the network operator.
SFBillingChargingCharacteristics{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minSFBillingChargingLength..
b2.&maxSFBillingChargingLength))
-- This parameter indicates the billing and/or charging characteristics for filtered calls.
-- Its content is network signalling/operator specific.
-- Actual format and encoding is outside the scope of this capability set.
SupportedTriggers TRIGGER ::=
{...}
SuspendTimer ::= INTEGER(0..120)
--value in seconds
TDPIdentifier{B2:b2} ::= CHOICE {
oneTrigger INTEGER,
triggers [1] Triggers{b2}
}
TerminalType ::= ENUMERATED {
unknown(0), dialPulse(1), dtmf(2), isdn(3), isdnNoDtmf(4), spare(16)
}
-- Identifies the terminal type so that the SCF can specify, to the SRF, the appropriate type of capability
-- (voice recognition, DTMF, display capability, etc.). Since present signalling systems do not convey
-- terminal type, this parameter applies only at originating or terminating local exchanges.
TimerID ::= ENUMERATED {tssf(0)}
-- Indicates the timer to be reset.
TimerValue ::= Integer4
-- Indicates the timer value (in seconds).
TravellingClassMark{B2:b2} ::=
LocationNumber{b2}
-- Indicates travelling class mark information.
-- Uses the LocationNumber format which is based on the Q.763 Location Number format.
-- The Nature of Address indicator field shall be set to "Spare" (value 00000000).
-- The Numbering Plan Indicator field shall be set to "Spare" (value 000).
-- Maximum 2 digits.
TriggerData ::= SEQUENCE {
triggerId [0] TRIGGER.&id({SupportedTriggers}),
triggerPar [1] TRIGGER.&Parameter({SupportedTriggers}{@triggerId}),
...
}
-- Contains a trigger identifier and the relevant trigger parameters
TriggerDataIdentifier{B1:b1, B2:b2} ::= SEQUENCE {
triggerID [0] EventTypeBCSM,
profile [1] ProfileIdentifier{b2},
extensions [2] Extensions{b1} OPTIONAL,
...
}
-- It is outside the scope of this capability set whether all TDP types really apply
TriggerDPType ::= ENUMERATED {tdp-r(0), tdp-n(1)}
TriggerResults{B2:b2} ::=
SEQUENCE SIZE (1..b2.&numOfTriggers) OF TriggerResult
TriggerResult ::= SEQUENCE {
tDPIdentifer [0] INTEGER,
actionPerformed [1] ActionPerformed,
dPName [2] EventTypeBCSM OPTIONAL,
...
}
Triggers{B2:b2} ::= SEQUENCE SIZE (1..b2.&numOfTriggers) OF Trigger
Trigger ::= SEQUENCE {
tDPIdentifier [0] INTEGER,
dpName [1] EventTypeBCSM OPTIONAL,
...
}
TriggerStatus ::= ENUMERATED {
created(0), alreadyExist(1), deleted(2), unknownTrigger(3)}
TriggerType ::= ENUMERATED {
featureActivation(0), verticalServiceCode(1), customizedAccess(2),
customizedIntercom(3), emergencyService(12), aFR(13), sharedIOTrunk(14),
offHookDelay(17), channelSetupPRI(18), tNoAnswer(25), tBusy(26),
oCalledPartyBusy(27), oNoAnswer(29), originationAttemptAuthorized(30),
oAnswer(31), oDisconnect(32), termAttemptAuthorized(33), tAnswer(34),
tDisconnect(35), oModifyRequest(100), tModifyRequest(101)}
-- The type of trigger which caused call suspension
-- 4-11: Reserved; 15,16: Reserved; 19-24: Reserved
USIInformation{B2:b2} ::=
OCTET STRING
(SIZE (b2.&minUSIInformationLength..b2.&maxUSIInformationLength))
-- Its content is network signalling/operator specific
USIMonitorMode ::= ENUMERATED {monitoringActive(0), monitoringInactive(1)
}
-- Indicates if the monitoring relationship for the specified UTSI IE should be activated or deactivated.
USIServiceIndicator{B2:b2} ::= CHOICE {
global OBJECT IDENTIFIER,
local
OCTET STRING
(SIZE (b2.&minUSIServiceIndicatorLength..
b2.&maxUSIServiceIndicatorLength))
}
-- In case of local its content is network signalling/operator specific
VPNIndicator ::= BOOLEAN
-- This parameter is set to TRUE if the originating call part supports VPN with PSS1 information flows
-- The Definition of range of constants Follows
END
-- Generated by Asnp, the ASN.1 pretty-printer of France Telecom R&D