|
1.
|
Clear description of the referenced document:
|
|
|
|
|
2.
|
Status of approval:
|
|
|
Specification published 30 June 2010.
|
|
3.
|
Justification for the specific reference:
|
|
|
The Bluetooth Core Specification Versions 2.1 and 4.0 are needed to allow device inter-connectivity within the Continua Design Guidelines personal area network architecture. This specification defines version 4.0. Bluetooth wireless specifications define a short-range communications system intended to replace the cable(s) connecting portable and/or fixed electronic devices.
|
|
4.
|
Current information, if any, about IPR issues:
|
|
|
N/A
|
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
|
Specification published 30 June 2010, widely used on a global basis.
|
|
6.
|
The degree of stability or maturity of the document:
|
|
|
Specification published 30 June 2010, version does not obsolete earlier versions. Vol.1, Part C lists relationship to earlier versions and deprecated features across the various system versions.
|
|
7.
|
Relationship with other existing or emerging documents:
|
|
|
See 5. and 6. above.
|
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
|
Vol.3 Part C:/
19) REFERENCES/
[1] Baseband Specification/
[2] Link Manager Protocol/
[3] RFCOMM/
[4] Telephony Control Specification/
[5] Service Discovery Protocol/
[6] Security Architecture (white paper)/
[7] Bluetooth Assigned Numbers/
/
Vol.3 Part G:/
10) REFERENCES/
[1] Assigned Numbers Specification: https://www.bluetooth.org/Technical/AssignedNumbers/home.htm/
/
Vol.3 Part H:/
4 REFERENCES/
[1] NIST Publication FIPS-197 (http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf)/
/
Vol.4 Part B:/
7) REFERENCES/
[1] USB 2.0, http://www.usb.org/developers/docs/docs, including:/
1. Interface Association Descriptors ECN/
2. Inter-Chip USB Supplement 1.0/
3. High Speed Inter-Chip USB Supplement 1.0/
4. Link Power Management 1.0/
[2] USB Device Firmware Upgrade 1.1/
/
Vol.4, Part C:/
C.1) Simplified Version of: SD Memory Card Specification: Part 1 Physical Layer Specification http://www.sdcard.org/sdphysical_simplifyed_Ver101.pdf/
C.2) Simplified Version of: SDIO Card Specification http://www.sdcard.org/SDIO-SimpleSpec-1.00_A.pdf/
C.3) Simplified Version of: SDIO Card Type-A Specification for Bluetooth http://www.sdcard.org/Simple_of_SDIO_Card_TypeA_Spec_v1.0_Draft_C_20020524.pdf/
/
Vol.4, Part D:/
13) References/
[1] [IETF RFC 1055: Nonstandard for transmission of IP datagrams over serial lines: SLIP – http://www.ietf.org/rfc/rfc1055.txt/
[2] ITU Recommendation V.24: List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) – http://www.itu.int/rec/recommendation.asp/
[3] ITU Recommendation V.28: Electrical characteristics for unbalanced double-current interchange circuits – http://www.itu.int/rec/recommendation.asp/
/
Volume 5, Part A:/
9 REFERENCES/
[1] IEEE 802.11-2007 Standard and Amendment 1 (Radio Resource Measurement)/
[2] ISO/IEC 3166-2/
[3] IEEE 802.15.2 Recommended Practice: Coexistence of WPAN with other wireless devices operating in unlicensed frequency bands/
[4] Bluetooth SIG Company Identifiers https://www.bluetooth.org/Technical/AssignedNumbers/identifiers.htm
|
|
9.
|
Qualification of
Bluetooth:
|
|
|
Bluetooth SIG meets the qualifying criteria for normative referencing as per Recommendation ITU-T A.5.
|
|
10.
|
Other (for any supplementary information):
|
|
|
N/A
|
