1.
|
Clear description of the referenced document:
|
|
|
2.
|
Status of approval:
|
|
Approved by IEEE-SA
|
3.
|
Justification for the specific reference:
|
|
ITU-T G.9903 refer to the PHY layer of this IEEE standard, as they are used and adapted to the G3-PLC hybrid PCL & RF technology.
|
4.
|
Current information, if any, about IPR issues:
|
|
No known issues.
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
Status (2023-11): Active - Approved
|
6.
|
The degree of stability or maturity of the document:
|
|
It is an approved IEEE standard. Date of Publication: 23 July 2020.
|
7.
|
Relationship with other existing or emerging documents:
|
|
None
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
– ANSI X3.66-1979, Advanced Data Communication Control Procedures./
– Code of Federal Regulations, Title 47: Telecommunication, Part 90-Private Land Mobile Radio Services, Subpart S-Regulations Governing Licensing and Use of Frequencies in the 806–824, 851–869, 896–901, and 935–940 MHz Bands (47 CFR, Part 90, Subpart S)./
– Code of Federal Regulations, Title 47: Telecommunication, Part 90-Private Land Mobile Radio Services, Subpart Y-Regulations Governing Licensing and Use of Frequencies in the 4940–4990 MHz Band (47 CFR, Part 90, Subpart Y)./
– FIPS Pub 197, Advanced Encryption Standard (AES)./
– IEEE Std 802-2014, IEEE Standards for Local and Metropolitan Area Networks: Overview and Architecture./
– IETF RFC 6225, Dynamic Host Configuration Protocol Options for Coordinate-Based Location Configuration Information, Internet Engineering Task Force./
|
9.
|
Qualification of
IEEE:
|
|
The IEEE was recognized under the provisions of ITU-T Recommendation A.5 on 1 November 1999. Qualifying information is on file with TSB.
|
10.
|
Other (for any supplementary information):
|
|
None
|