CONTENTS

Policy on Intellectual Property Right (IPR)
 1     Introduction
 2     Reception modes
        2.1     Fixed reception
        2.2     Portable reception
                  2.2.1     Portable indoor reception
                  2.2.2     Portable outdoor reception
                  2.2.3     Portable indoor/outdoor handheld reception (PI-H, PO-H)
        2.3     Mobile reception
                  2.3.1     Mobile handheld reception (MO-H)
 3     Correction factors for field-strength predictions
        3.1     Reference frequencies
        3.2     Antenna gain
                  3.2.1     Antenna gain for fixed reception
                  3.2.2     Antenna gain for portable reception
                  3.2.3     Antenna gain for portable and mobile handheld reception
                  3.2.4     Antenna gain for mobile reception
        3.3     Feeder loss
        3.4     Height loss correction factor
        3.5     Building entry loss
        3.6     Allowance for man-made noise
                  3.6.1     Allowance for man-made noise for fixed, portable and mobile reception
                  3.6.2     Allowance for man-made noise for portable handheld reception
        3.7     Implementation loss factor
        3.8     Correction factors for location variability
                  3.8.1     Distribution factor
                  3.8.2     Combined standard deviation
                  3.8.3     Combined location correction factor for protection ratios
        3.9     Polarization discrimination
       3.10     Calculation of minimum median field-strength level
       3.11     Calculation of minimum median field-strength level – integrated method for 100 MHz band
 4     Planning parameters for digital terrestrial broadcasting system DRM robustness mode E in VHF Bands I, II and III
        4.1     DRM system parameters
                  4.1.1     Modes and code rates
                  4.1.2     Propagation-related OFDM parameters
                  4.1.3     Single frequency operation capability
                  4.1.4     Channel models
        4.2     DRM receiver parameters
                  4.2.1     General characteristics
                  4.2.2     Receiver noise figure
                  4.2.3     Receiver noise input power
                  4.2.4     Minimum carrier to noise ratio
                  4.2.5     Minimum receiver input power level
        4.3     DRM planning parameters
                  4.3.1     Minimum median field-strength level
                  4.3.2     Position of DRM frequencies
                  4.3.3     Out-of-band spectrum mask
                  4.3.4     Protection ratios
                  4.3.5     Calculation of the resulting sum field strength of interferers
 5     Planning parameters for digital terrestrial broadcasting system RAVIS in VHF Bands I and II
        5.1     System parameters of RAVIS
                  5.1.1     RAVIS signal parameters
                  5.1.2     SFN operation capabilities
                  5.1.3     Channel models
        5.2     RAVIS radio receiver related parameters
        5.3     RAVIS planning parameters
                  5.3.1     Minimum median field-strength
                  5.3.2     Out-of-band emissions
                  5.3.3     Protection ratios
                  5.3.4     Sharing criteria with other services
 6     Planning parameters for Digital System C (HD Radio) in VHF Band II
        6.1     HD Radio system parameters
                  6.1.1     System configurations
                  6.1.2     Channel models and fading margins
        6.2     HD Radio receiver parameters
                  6.2.1     Minimum C/N
                  6.2.2     Receiver integrated noise figure
        6.3     HD Radio planning parameters
                  6.3.1     Minimum wanted field strength used for planning
 7     Planning parameters for Digital System A (DAB) in VHF Band III
        7.1     System parameters of DAB
                  7.1.1     Modulation scheme and guard interval
                  7.1.2     Transmission modes
                  7.1.3     Protection levels, coding and net bit rates
                  7.1.4     Channel models
                  7.1.5     SFN performance
        7.2     Receiver parameters
                  7.2.1     Receiver noise figure
                  7.2.2     Minimum receiver signal input levels
        7.3     Additional considerations for DAB planning
                  7.3.1     Coverage prediction height
                  7.3.2     Building and vehicle entry loss
                  7.3.3     Location percentages
        7.4     Planning parameters
                  7.4.1     Minimum median field strength
                  7.4.2     Transmitter spectrum mask
                  7.4.3     DAB frequency block raster and bandwidth
                  7.4.4     Protection ratios
 8     Planning parameters for digital terrestrial broadcasting system ISDB-TSB in VHF bands II and III
        8.1     System parameters of ISDB-TSB
        8.2     Receiver parameters
        8.3     ISDB-TSB planning parameters
 9     Planning parameters for digital terrestrial broadcasting system CDR in VHF
        9.1     System parameters of CDR
                  9.1.1     CDR signal parameters
                  9.1.2     CDR radio receiver related parameters
        9.2     Minimum receiver input power level
        9.3     Minimum median field-strength for planning
Annex 1   Symbols and abbreviations
Annex 2   Technical references
 1     Position of DRM frequencies
        1.1     VHF Band II
        1.2     VHF Band III
 2     Computations of correction factors
        2.1     Computation of the antenna gain for portable handheld reception
        2.2     Computation of man-made noise allowance from the antenna noise factor
References