Policy on Intellectual Property Right (IPR)
1 Introduction
2 Building entry loss measurements (Europe)
3 Building entry loss measurements (Japan)
4 Exit loss measurements
4.1 Measured result
5 Building entry loss – slant path measurements
5.1 UHF satellite signal measurements (860 MHz – 2.6 GHz)
5.2 Slant-path measurements from towers or high rise buildings
5.3 Helicopter measurements to office building
5.4 Balloon measurements to domestic buildings (1-6 GHz)
6 Impact of thermally-insulating materials
6.1 Introduction
6.2 Median building entry loss
6.3 Variability of loss within a room
6.4 Variability of loss from room-to-room
6.5 Impact of insulating materials on loss
7 Measurements at 3.5 GHz
7.1 Environment
7.2 Measurement configuration
7.3 Measurement results at 3.5 GHz
8 Measurements in Stockholm at 0.5 to 5 GHz
8.1 Configuration of the set-up
8.2 General results
8.3 Average excess loss results
8.4 Method 1 versus Method 2 results
9 Building entry loss measurement at 3.5 GHz in Beijing
9.1 Measurement scenarios
9.1.1 Building A
9.1.2 Building B
9.1.3 Building C
9.2 Test methodology
9.2.1 Measuring system and instrument
9.2.2 Calculation method of building entry loss
9.3 Measurement results
9.3.1 Measurement results and analysis of building A
scenario
9.3.2 Measurement results and analysis of building B
scenario
9.3.3 Measurement results and analysis of building C
scenario
10 Building entry loss measurement at 3.5 GHz in UK
10.1 UK measurements
10.2 Methodology
10.2.1 Hardware
10.2.2 Software
10.3 Test locations
10.3.1 Terraced house
10.3.2 Small office
10.3.3 Retail buildings
10.4 Results
10.4.1 Building entry loss
10.4.2 BEL Variability
11 Building entry loss measurements at 28 GHz
11.1 Scenario
11.2 Experimental Set-up
11.3 Data collection/analysis
11.4 Results
11.5 Conclusion
12 Measurements at 5.2 GHz
Annex 1 Building entry loss in point-to-area applications below 3 GHz