Policy on Intellectual Property Right (IPR)
1 Minimum usable field strength
2 Radio-frequency protection ratios
2.1 General
2.2 Monophonic service
2.3 Stereophonic service
2.4 Carrier frequency differences
greater than 400 kHz
2.5 Technical conditions
3 Channel spacing
1 Interference caused by an overmodulated
transmitter
2 Interference for large carrier frequency
differences
3 Interference when the protection ratio is
not respected
4 RF protection ratios for different wanted
signal levels
5 Interference caused by intermodulation of
strong RF signals
1 Introduction
2 Measuring conditions
2.1 Arrangement
2.2 Evaluation
3 Results and considerations
3.1 Comparison between monophonic
and stereophonic modes
3.2 Results and considerations for
the stereophonic mode
4 Application
5 Conclusion
1 Introduction
2 Measurement results