CONTENTS - RECOMMENDATION ITU-R M.1581-5* - Generic unwanted emission characteristics of mobile stations using the terrestrial radio interfaces of IMT-2000

Policy on Intellectual Property Right (IPR)
Annex 1 Code division multiple access (CDMA) direct spread ((UTRA) FDD) mobile stations
1     Measurement uncertainty
2     Spectrum mask
        2.1     UTRA spectrum mask
                  2.1.1     Additional spectrum emission mask for DC-HSUPA
        2.2     E-UTRA spectrum mask
                  2.2.1     E-UTRA spectrum mask
                  2.2.2     Additional E-UTRA spectrum mask
3     Adjacent channel leakage power ratio (ACLR)
        3.1     UTRA ACLR
                  3.1.1     Additional requirement for DC-HSUPA
        3.2     E-UTRA ACLR
                  3.2.1     Limits for E-UTRA
                  3.2.2     Limits for E-UTRA for UTRA coexistence in the same geographical area
                  3.2.3     Additional ACLR limits for UTRA
4     Transmitter spurious emissions (conducted)
        4.1     Transmitter spurious emissions for UTRA
                  4.1.1     Transmitter spurious emissions for DC-HSUPA
        4.2     Transmitter spurious emissions for E-UTRA
                  4.2.1     Additional spurious emissions
                  4.2.2     Additional spurious emissions for CA
5     Receiver spurious emissions (conducted)
        5.1     Receiver spurious emissions for UTRA
        5.2     Receiver spurious emissions for E-UTRA
Annex 2 IMT 2000 CDMA Multi-Carrier (CDMA-2000) mobile stations
1     Spectrum mask
        1.1     Spreading rate 1
        1.2     Multi-carrier HRPD
        1.3     Spreading rate 3
        1.4     Simultaneous cdma2000 and cdma2000-HRPD
2     Transmitter spurious emissions (conducted)
3     Adjacent channel leakage power ratio
4     Receiver spurious emissions (conducted)
1     Spectrum mask
2     Transmitter spurious emission
3     Adjacent channel leakage power ratio
Annex 3 CDMA TDD (UTRA TDD) mobile stations
1     Measurement uncertainty
2     Spectrum mask
        2.1     Spectrum mask (3.84 Mchip/s UTRA TDD option)
        2.2     Spectrum mask (1.28 Mchip/s UTRA TDD option)
        2.3     Spectrum mask (7.68 Mchip/s UTRA TDD option)
        2.4     E-UTRA spectrum mask
                  2.4.1     General E-UTRA spectrum mask
                  2.4.2     Additional E-UTRA spectrum mask
3     ACLR
        3.1     ACLR for UTRA
        3.2     ACLR for E-UTRA
                  3.2.1     Limits for E-UTRA
                  3.2.2     Limits for EUTRA for UTRA coexistence in the same geographical area
4     Transmitter spurious emissions (conducted)
        4.1     Transmitter spurious emissions for UTRA
                  4.1.1     Additional requirement for 1.28 Mcps TDD MC-HSUPA
        4.2     Transmitter spurious emissions for E-UTRA
5     Receiver spurious emissions (conducted)
        5.1     Receiver spurious emissions for UTRA
        5.2     Receiver spurious emissions for E-UTRA
Annex 4 TDMA Single-Carrier (UWC-136) mobile stations
1     Spectrum mask
2     Transmitter spurious emissions (conducted)
        2.1     Coexistence with services in adjacent frequency bands
3     Receiver spurious emissions (idle mode)
1     Frequency bands and channel arrangement
i)     T-GSM 380 Band:
ii)     T-GSM 410 Band:
iii)     GSM 450 Band:
iv)     GSM 480 Band:
v)     GSM 710 Band:
vi)     GSM 750 Band:
vii)    T-GSM 810 Band:
viii)     GSM 850 Band:
ix)     Standard or primary GSM 900 Band, P‑GSM:
x)     Extended GSM 900 Band, E‑GSM (includes Standard GSM 900 Band):
xi)     Railways GSM 900 Band, R‑GSM (includes Standard and Extended GSM 900 Band):
xii)     Void:
xiii)     DCS 1 800 Band:
xiv)     PCS 1 900 Band:
2     Spectrum
3     Spectrum due to the modulation and wideband noise
4     Spectrum due to switching transients
5     Transmitter spurious emissions
        5.1     Principle of the specification
                  5.1.1     Relation to definitions and requirements in CEPT/ERC/REC 74-01 and ITU‑R SM.329
6     Coexistence with services in adjacent frequency bands
        6.1     Spurious emissions for mobile station GSM 400, T-GSM 810, GSM 900 and DCS 1 800
        6.2     Spurious Emissions for Mobile Station GSM 700, GSM 850 and PCS 1 900
Annex 5 FDMA/TDMA (digital enhanced cordless telecommunications (DECT)) mobile stations
1     Spectrum mask
2     Emissions due to modulation
3     Emissions due to transmitter transients
4     Transmitter spurious emissions (conducted)
        4.1     Spurious emissions when allocated a transmit channel
5     Receiver spurious emissions (idle mode)
        5.1     Spurious emissions when the EUT has no allocated transmit channel
        5.2     In the DECT band
Annex 6 IMT-2000 OFDMA TDD WMAN mobile stations
1     Spectrum emission mask
        1.1     Default spectrum emission mask
        1.2     Spectrum emission mask for TDD equipment operating in the band 2 300‑2 400 MHz (BCG 1.A/1.B)
        1.3     Spectrum emission mask for TDD equipment operating in the band 2 500-2 690 MHz (BCG 3.A)
        1.4     Spectrum emission mask for TDD equipment operating in the band 3 400-3 600 MHz (BCG 5L.A/5L.B/5L.C)
                  1.4.1     5 MHz channel bandwidth
                  1.4.2     7 MHz channel bandwidth
                  1.4.3     10 MHz channel bandwidth
        1.5     Spectrum emission mask for TDD equipment operating in the bands 3 600‑3 800 MHz (BCG 5H.A/5H.B/5H.C)
                  1.5.1     5 MHz channel bandwidth
                  1.5.2     7 MHz channel bandwidth
                  1.5.3     10 MHz channel bandwidth
        1.6     Spectrum emission mask for FDD equipment operating in the bands 1 710‑1 770/2 110-2 170 MHz (BCG 6A)
        1.7     Spectrum emission mask for FDD equipment operating in the bands 1 920‑1 980/2 110-2 170 MHz (BCG 6.B)
        1.8     Spectrum emission mask for FDD equipment operating in the band 2 496-2 690 MHz (BCG 3.B)
        1.9     Spectrum emission mask for FDD equipment operating in the bands 1 710‑1 785/1 805-1 880 MHz (BCG 6.C)
       1.10     Spectrum emission mask for TDD equipment operating in the bands 698-862 MHz (BCG 7.A)
       1.11     Spectrum emission mask for FDD equipment operating in the bands 776‑787/746‑757 MHz (BCG 7.B)
       1.12     Spectrum emission mask for FDD equipment operating in the bands 788-793/ 758-763 and 793-798/763-768 MHz (BCG 7.C)
       1.13     Spectrum emission mask for FDD equipment operating in the bands 788‑798/758‑768 MHz (BCG 7.D)
       1.14     Spectrum emission mask for FDD and TDD equipment operating in the bands 698‑862 MHz (BCG 7.E)
       1.15     Spectrum emission mask for FDD equipment operating in the bands 880‑915/925‑960 MHz (BCG 7.F)
       1.16     Spectrum emission mask for TDD equipment operating in the bands 1 785-1 805, 1 880-1 920, 1 910-1 930, 2 010-2 025, and 1 900-1 920 MHz (BCG 8.A)
2     Transmitter spurious emissions (conducted)
        2.1     Default spurious emissions
        2.2     Spurious emissions for TDD equipment operating in the band 2 300-2 400 MHz (BCG 1.A/1.B)
        2.3     Spurious emissions for TDD equipment operating in the band 2 500-2 690 MHz (BCG 3.A)
        2.4     Spurious emission for TDD equipment operating in the band 3 400-3 600 MHz (BCG 5L.A/5L.B/5L.C)
        2.5     Spurious emissions for TDD equipment operating in the band 3 600-3 800 MHz (BCG 5H.A/5H.B/5H.C)
        2.6     Spurious emissions for FDD equipment operating in the band 1 710‑1 770/2 110‑2 170 MHz (BCG 6.A)
        2.7     Spurious emissions for FDD equipment operating in the band 1 920‑1 980/2 110‑2 170 MHz (BCG 6.B)
        2.8     Spurious emissions for FDD equipment operating in the band 2 496-2 690 MHz (BCG 3.B)
        2.9     Spurious emissions for FDD equipment operating in the band 1 710-1 785/ 1 805-1 880 MHz (BCG 6.C)
       2.10     Spurious emissions for TDD equipment operating in the band 698-862 MHz (BCG 7.A)
       2.11     Spurious emissions for FDD equipment operating in the band 776-787/746-757 MHz (BCG 7.B)
       2.12     Spurious emissions for FDD equipment operating in the band 788-793/758-763 and 793-798/763-768 MHz (BCG 7.C)
       2.13     Spurious emission for FDD equipment operating in the bands 788-798/758-768 MHz (BCG 7.D)
       2.14     Spurious emission for FDD and TDD equipment operating in the bands 698‑862 MHz (BCG 7.E)
       2.15     Spurious emission for FDD equipment operating in the bands 880-915/925-960 MHz (BCG 7.G)
       2.16     Spurious emission for TDD equipment operating in the bands 1 785-1 805, 1 880‑1 920, 1 910-1 930, 2 010-2 025, and 1 900-1 920 MHz (BCG 8.A)
3     Receiver spurious emissions (conducted)
        3.1     Spurious emissions for TDD equipment operating in the band 2 500-2 690 MHz (BCG 3.A)
4     Adjacent channel leakage ratio (ACLR)
        4.1     ACLR values for TDD equipment operating in the band 2 300-2 400 MHz (BCG 1.B)
        4.2     ACLR of TDD equipment operating in the frequency range 2 500-2 690 MHz (BCG 3.A)
        4.3     ACLR of TDD equipment operating in the frequency range 3 400-3 600 MHz (BCG 5L.A/5L.B/5L.C)
        4.4     ACLR values for FDD equipment operating in the band 1 710-1 785/1 805-1 880 MHz (BCG 6.C)
        4.5     ACLR values for FDD equipment operating in the bands 880-915/925-960 MHz (BCG 7.G)
5     Test tolerance
Attachment 1
Definition of test tolerance