Summary

Worldwide, technologies for general transport network and broadband access networks are advancing rapidly. Among these, the technology applying single-mode fibre provides for a high-capacity transmission medium which can answer the growing demand for high speed and broadband services.

The experience with the installation and operation of single-mode fibre and cable-based networks is huge and Recommendation [ITU-T G.652], which describes its characteristics, has been adapted to this experience. Nevertheless, the specific use in an optical access network puts different demands on the fibre and cable which impacts its optimal performance characteristics. Differences with respect to the use in the general transport network are mainly due to the high density network of distribution and drop cables in the access network. The limited space and the many manipulations ask for operator-friendly fibre performance and low bending sensitivity. In addition, the cabling in the crowded telecom offices where space is a limiting factor has to be improved accordingly. Yet, certain areas of the general transport and datacenter networks can also be described as space limited, where bend optimized cabling can be advantageous.

It is the aim of Recommendation ITU-T G.657 to support this optimization by recommending strongly improved bending performance compared with the existing [ITU-T G.652] single-mode fibre and cables. This is done by means of two categories of single-mode fibres, one of which, category A, is fully compliant with the [ITU-T G.652] single-mode fibres and can be deployed throughout the general transport and datacenter networks as well as the access network. The other, category B, is not necessarily compliant with Recommendation [ITU‑T G.652], but is capable of low values of macrobending losses at very low bend radii and is intended for application in the access network inside buildings or near buildings (e.g., outside building riser cabling). These category B fibres are system compatible with ITU‑T G.657.A (and [ITU-T G.652.D]) fibres in access networks.

This fifth edition of Recommendation ITU-T G.657, amongst other things, extends the application space for G.657 fibre and merges category B2 into category A2.