Rec. ITU-T G.709.1/Y.1331.1 (05/2020) Flexible OTN short-reach interfaces Corrigendum 1
Summary
History
FOREWORD
Table of Contents
1 Scope
2 References
3 Definitions
     3.1 Terms defined elsewhere
     3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Conventions
6 Introduction and applications
     6.1 FlexO-x-RS-m interface group considerations
7 Structure and processes
     7.1 Basic signal structure
     7.2 Processing and information flow
8 FlexO frame
     8.1 Frame structure
     8.2 Multi-frame structure
     8.3 Bit rates and frame periods
9 Alignment markers and overhead
     9.1 Lane alignment markers
          9.1.1 FlexO-1 alignment markers
          9.1.2 100G FlexO PAD
          9.1.3 FlexO-2 alignment markers
          9.1.4 FlexO-2 PAD
          9.1.5 FlexO-4 alignment markers
          9.1.6 FlexO-4 PAD
     9.2 Overhead description
          9.2.1 Multi-frame alignment signal (MFAS)
          9.2.2 Group identification (GID)
          9.2.3 FlexO instance identification (IID)
          9.2.4 FlexO map (MAP)
          9.2.5 Status (STAT)
               9.2.5.1 Remote PHY fault (RPF)
               9.2.5.2 Reserved (RES)
          9.2.6 OTUC availability (AVAIL)
          9.2.7 Cyclic redundancy check (CRC)
          9.2.8 FlexO management communications channel (FCC)
          9.2.9 FlexO reserved overhead (RES)
          9.2.10 OTN synchronization message channel (OSMC)
               9.2.10.1 Generation of event message timestamp
10 Mapping of OTUCn signal into n FlexO instances
     10.1 Distributing OTUCn and combining OTUC instances
     10.2 FlexO frame payload
     10.3 Mapping of OTUC into FlexO frame
          10.3.1 Mapping of OTUC into FlexO frame
     10.4 FlexO-x-RS-m group alignment and deskewing
11 100G FlexO-1-RS interface
     11.1 Frame structure
     11.2 Bit rate and frame periods
     11.3 Overhead
     11.4 Scrambling
     11.5 Forward error correction (FEC)
     11.6 FOIC1.k-RS interface
          11.6.1 FOIC1.4-RS interface
          11.6.2 FOIC1.4-RS skew tolerance requirements
          11.6.3 FOIC1.4-RS 28G lane bit rate
          11.6.4 m*FOIC1.4-RS interface
12 200G FlexO-2-RS interface
     12.1 Frame structure
     12.2 Bit rate and frame period
     12.3 Overhead
     12.4 Scrambling
     12.5 Forward error correction (FEC)
     12.6 FOIC2.k-RS interface
          12.6.1 FOIC2.4-RS interface
          12.6.2 FOIC2.4-RS skew tolerance requirements
          12.6.3 FOIC2.4-RS 56G lane bit rate
          12.6.4 m*FOIC2.4-RS interface
          12.6.5 FOIC2.4-RS interface processes
13 400G FlexO-4-RS interface
     13.1 Frame structure
     13.2 Bit rate and frame periods
     13.3 Overhead
     13.4 Scrambling
     13.5 Forward error correction (FEC)
     13.6 FOIC4.k-RS interface
          13.6.1 FOIC4.8-RS interface
          13.6.2 FOIC4.8-RS skew tolerance requirements
          13.6.3 FOIC4.8-RS 56G lane bit rate
          13.6.4 m*FOIC4.8-RS interface
          13.6.5 FOIC4.8-RS interface processes
Annex A  Forward error correction for FlexO-x-RS (x = 2,4) using 10-bit interleaved RS(544,514) codecs
Appendix I  Example applications
Bibliography