1
Scope
2 References
3 Terms and Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations
5 Methodology
5.1 Basic methodology
5.2 Transmission layer naming
5.3 Atomic function naming
and diagrammatic conventions
5.4 Reference point naming
5.5 Reference point
information naming
5.6 Atomic function
process allocation
5.7 Combination rules
5.8 Fault management and
performance monitoring naming
5.9 Fault management and
performance monitoring specification techniques
6 Supervision
6.1 Trail
termination point mode and port mode
6.2 Defect filter
6.3 Consequent actions
6.4 Defect correlations
6.5 One-second performance
monitoring filters
7 Information flow (XXX_MI)
across the XXX_MP reference points
8 Generic processes
8.1 Line coding and
scrambling processes
8.2 Alignment processes
8.3 Performance
supervision process
8.4 BIP correction
8.5 GFP processes
9 Performance and reliability
9.1 Transit delay
9.2 Response times
9.3 Availability and
reliability
9.4 Laser safety
10 Generic equipment functions
10.1 LCAS-capable virtual
concatenated path layer functions P-Xv-L (X ³ 1)
Annex A – Assignment and use of signal label, payload type and
user payload identifier codes
A.1 Experimental code
A.2 Proprietary codes
A.3 Request for
standardized codes
Annex B – P-Xv/P-X-L_A_Sk: Calculation of RI_MST_gen for
_LCASActive = true
Appendix I – Connection matrix examples
I.1 Connection matrix
example for full connectivity
I.2 Connection matrix
example for 2-port groups
I.3 Connection matrix
example for 3-port groups type I
I.4 Connection matrix
example for 3-port groups type II
I.5 Connection matrix
example for 4-port groups type I
I.6 Connection matrix
example for 4-port groups type II
I.7 Example of a
provisioned connection matrix
Appendix II – Example of remote indication operation
II.1 Remote defect
indication (RDI)
II.2 Remote error
indication (REI)
Appendix III – Alarm indication signal (AIS)
Appendix IV – Signal fail (SF) and signal degrade (SD)
IV.1 Server signal fail
(SSF) signal
IV.2 Server signal degrade
(SSD) signal
IV.3 Trail signal fail
(TSF) signal
IV.4 Trail signal degrade
(TSD) signal
Appendix V – Description of error detection code (EDC)
terminology N × BIP-m
Appendix VI – Calculations leading to BIP saturation results
in Tables 6-4 and 6-5
VI.1 Introduction
VI.2 Calculations and
results
Appendix VII – Examples for the operation of the processes
within LCAS-capable adaptation functions
VII.1 Basic configuration
VII.2 LCAS-enabled So and Sk
functions
VII.3 LCAS-enabled So and
LCAS-disabled Sk functions
VII.4 LCAS-disabled So and
LCAS-enabled Sk functions
VII.5 Non-virtual-concatenation
So and LCAS-capable virtual-concatenation Sk functions
Appendix VIII – Consequent actions for signals with no AIS/FDI
defined
Bibliography