1 Scope
2 References
3 Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Base station classification
6 Test methods and limits
6.1 Emission
6.2 Immunity
7 Test conditions
7.1 General conditions
7.2 General arrangements for test signals
7.3 Exclusion band
7.4 Narrowband responses on receivers
8 Specific test configurations
8.1 Macro base station
8.2 Distributed base station
8.3 Micro base station
8.4 Pico base station
8.5 Active antenna system base station
9 Performance assessment
9.1 Assessment of BLER/throughput/BER/FER in downlink
9.2 Assessment of BLER/throughput/BER/FER in uplink
9.3 Assessment of RF gain variations of repeaters
10 Performance criteria
10.1 Performance criteria A for continuous phenomena applied to base
stations and repeaters
10.2 Performance criteria B for transient phenomena for base
stations and repeaters
10.3 Performance criteria for ancillary equipment
10.4 Performance criteria C
Annex A – Emission test level
Annex B – Immunity test level
Annex C – Equipment within the scope of the present Recommendation
C.1 Base station equipment for IMT-2000 CDMA DirectSpread (UTRA)
C.2 Base station equipment for E-UTRA
C.3 GSM base station, ancillary RF amplifiers, and GSM repeaters
meeting Phase 2 and 2+
C.4 Other types of GSM base station, ancillary RF amplifiers, and
GSM repeaters equipment
C.5 Multi-standard radio base station equipment
C.6 WiMAX base station equipment
C.7 Mobile WiMAX base station equipment
C.8 CDMA 1x spread spectrum base stations, repeaters and ancillary
equipment
Annex D – Test guide of radiated emission for wireless base station
D.1 Software of EUT
D.2 Reduce overload of test receiver
D.3 Pre-test for radiated emission
Bibliography