Rec. ITU-T K.116 (07/2019) - Electromagnetic compatibility requirements and test methods for radio telecommunication terminal equipment
Summary
History
FOREWORD
Table of Contents
Introduction
1 Scope
2 References
3 Definitions
     3.1 Terms defined elsewhere
     3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Conventions
6 Test conditions
     6.1 General
     6.2 Arrangements for test signals
          6.2.1 Arrangements for test signals at the input of transmitters
          6.2.2 Arrangements for test signals at the output of transmitters
          6.2.3 Arrangements for test signals at the input of receivers
          6.2.4 Arrangements for test signals at the output of receivers
          6.2.5 Arrangements for testing transmitter and receiver together (as a system)
     6.3 RF exclusion band of radio communications equipment
     6.4 Narrow band responses of receivers or receivers which are part of transceivers
     6.5 Normal test modulation
7 Performance assessment
     7.1 General
     7.2 Equipment which can provide a continuous communication link
     7.3 Equipment which does not provide a continuous communication link
     7.4 Ancillary equipment
     7.5 Equipment classification
8 Performance criteria
     8.1 Performance criteria for continuous phenomena
     8.2 Performance criteria for transient phenomena
     8.3 Performance criteria for ancillary equipment tested on a standalone basis
9 Applicability overview tables
     9.1 Emission
     9.2 Immunity
10 Methods of measurement and limits for EMC emissions
     10.1 Test configurations
     10.2 Radiated emission
          10.2.1 Definition
          10.2.2 Test method
          10.2.3 Limits
     10.3 Conducted emission DC power input/output port
          10.3.1 Definition
          10.3.2 Test method
          10.3.3 Limits
     10.4 Conducted emissions AC mains power input/output port
          10.4.1 Definition
          10.4.2 Test method
          10.4.3 Limits
     10.5 Harmonic current emissions (AC mains input port)
     10.6 Voltage fluctuations and flicker (AC mains input port)
     10.7 Telecommunication ports
          10.7.1 Definition
          10.7.2 Test method
          10.7.3 Limits
11 Test methods and levels for immunity tests
     11.1 Test configurations
     11.2 RF electromagnetic field (80 MHz to 6 000 MHz)
          11.2.1 Definition
          11.2.2 Test method and level
          11.2.3 Performance criteria
     11.3 Electrostatic discharge
          11.3.1 Definition
          11.3.2 Test method and level
          11.3.3 Performance criteria
     11.4 Fast transients common mode
          11.4.1 Definition
          11.4.2 Test method and level
          11.4.3 Performance criteria
     11.5 Radio frequency, common mode
          11.5.1 Definition
          11.5.2 Test method and level
          11.5.3 Performance criteria
     11.6 Transients and surges, vehicular environment
          11.6.1 Definition
          11.6.2 Test method and level
               11.6.2.1 Test requirements for 12 V and 24 V DC powered equipment
          11.6.3 Performance criteria
     11.7 Voltage dips and interruptions
          11.7.1 Definition
          11.7.2 Test method and level
          11.7.3 Performance criteria
     11.8 Surges
          11.8.1 Definition
          11.8.2 Test method and level
               11.8.2.1 Test method for telecommunication ports directly connected to outdoor cables
               11.8.2.2 Test method for telecommunication ports connected to indoor cables
               11.8.2.3 Test method for mains ports
          11.8.3 Performance criteria
Annex A  Arrangements for the performance assessment of host dependant equipment and plug-in cards
     A.1 Alternative A: composite equipment
     A.2 Alternative B: use of a test jig or host
Appendix I  Testing modes for 5G and/or smart mobile phones
Bibliography