1 Scope
2
References
3
Definitions
4
High frequency EMC
5
Low frequency EMC
6
Equipment specifications
7
Environment
7.1 Distance to interference sources
7.2 Distance to radio transmitters
7.3 Earthing and bonding network
7.4 a.c. power network and electrical equipment
7.5 Materials and humidity
8
Installation
8.1 Equipment
8.2 Cabling
8.3 Connectors
9
Working methods
9.1 Restrictions to use disturbing equipment
9.2 Avoiding ESD in maintenance and repair
10 Special mitigation measures
10.1 Screening
10.1.1 Screening (high frequency)
10.1.2 Screening (low frequency)
10.2 Filtering
10.2.1 Filtering (high frequency)
10.2.2 Filtering (low frequency)
10.3 Common mode chokers
10.3.1 Common mode chokes (high frequency)
10.3.2 Common mode chokes (low frequency)
10.4 Drainage coils (low frequency)
10.5 Active filters (low frequency)
10.6 Neutralizing transformers (low frequency)
10.7 Hybrid solutions (low frequency)
10.8 Isolation transformers (high and low frequency)
10.9 Optical components (high and low frequency)
10.10 Capacitors (high frequency)
Appendix I – Troubleshooting and fixing high frequency EMC problems
I.1 Introduction
I.2 Source verification
I.3 Check-list for problem solution
I.4 Bibliography
Appendix II – Troubleshooting and fixing low frequency EMC
problems
II.1 Introduction
II.2 Source verification
II.3 Check-list for problem solution