1
Scope
2
References
3
Definitions
3.1
Terms
defined elsewhere
3.2
Terms
defined in this Recommendation
4
Abbreviations
and acronyms
5
Reference
configuration
6
Protection
need against lightning
7
Site
classification
7.1
Antenna
installed within, or attached to, the building
7.2
Antenna installed near the building
8
Methods
of protection
8.1
General
8.2
Contact with the mains
8.3
Direct
lightning strike protection
9
Protection
requirements
9.1
General
9.2
Antenna
installed within, or attached to, the building
9.3
Antenna
installed near to the building
9.4
Earthing
and bonding
9.5
Selection
and dimensioning of the surge protection devices (SPDs)
10 Responsibilities
Annex A –
Direct lightning to the structure: equipotential bonding of a shielded cable at
the entrance of the structure
Appendix
I Antenna on buildings used as air
termination of the LPS
Appendix II
– Generic risk assessment
II.1
Site
with a roof antenna deemed to be low risk
II.2
Risk
calculations
Appendix
III – Example: Antenna installed near a building
III.1
General
III.2
Building
characteristics
III.3
Characteristics
of the services
III.4
Characteristics
of the internal systems
III.5
Zones
definition in the structure
III.6
Expected
dangerous events to the structure
III.7
Risk
assessment for the unprotected structure
III.8 Selected protection measures
III.9
Risk assessment related to the protected structure
III.10 SPDs