1.
|
Clear description of the referenced document:
|
|
|
2.
|
Status of approval:
|
|
Specification approved 2007-07-26. Errata exist, incorporated in published document.
|
3.
|
Justification for the specific reference:
|
|
The Bluetooth Core Specification Versions 2.1 and 4.0 are needed to allow device inter-connectivity within the Continua Design Guidelines personal area network architecture. This specification defines version 2.1. Bluetooth wireless specifications define a short-range communications system intended to replace the cable(s) connecting portable and/or fixed electronic devices.
|
4.
|
Current information, if any, about IPR issues:
|
|
N/A
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
Specification approved 2007-07-26, which is widely used globally. Errata exist, incorporated in published document.
|
6.
|
The degree of stability or maturity of the document:
|
|
Specification approved 2007-07-26, versions 3 and 4 exist but do not obsolete version 2.1. Version 2.0 is deprecated.
|
7.
|
Relationship with other existing or emerging documents:
|
|
See 5. and 6. above.
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
/
Vol.4/
C.1) Simplified Version of: SD Memory Card Specification: Part 1 Physical Layer Specification http://www.sdcard.org/sdphysical_simplifyed_Ver101.pdf/
C.2) Simplified Version of: SDIO Card Specification http://www.sdcard.org/SDIO-SimpleSpec-1.00_A.pdf/
C.3) Simplified Version of: SDIO Card Type-A Specification for Bluetooth http://www.sdcard.org/Simple_of_SDIO_Card_TypeA_Spec_v1.0_Draft_C_20020524.pdf/
/
13 References/
[1] [IETF RFC 1055: Nonstandard for transmission of IP datagrams over serial lines: SLIP – http://www.ietf.org/rfc/rfc1055.txt/
[2] ITU Recommendation V.24: List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) – http://www.itu.int/rec/recommendation.asp/
[3] ITU Recommendation V.28: Electrical characteristics for unbalanced double-current interchange circuits – http://www.itu.int/rec/recommendation.asp/
|
9.
|
Qualification of
Bluetooth:
|
|
Bluetooth SIG meets the qualifying criteria for normative referencing as per Recommendation ITU-T A.5.
|
10.
|
Other (for any supplementary information):
|
|
N/A.
|