Committed to connecting the world

  •  
ITU GSR 2024

ITU-T work programme

Home : ITU-T Home : ITU-T Work Programme : G.8013/Y.1731 Amd.1     
  ITU-T A.5 justification information for referenced document IEEE Std 802.3-2018 in draft G.8013/Y.1731 Amd.1
1. Clear description of the referenced document:
Name: IEEE Std 802.3-2018
Title: IEEE Standard for Ethernet
2. Status of approval:
Approved on 14 June 2018
3. Justification for the specific reference:
The architectural basis for G.8013/Y.1731 is partly based on the Ethernet specification of [IEEE 802.3].
4. Current information, if any, about IPR issues:
Information on patents related to IEEE Std 802.3 and its amendments can be found at http://standards.ieee.org/about/sasb/patcom/pat802_3.html
5. Other useful information describing the "Quality" of the document:
The referenced standard has completed the rigorous and comprehensive review and approval process of the IEEE standards development committee.
6. The degree of stability or maturity of the document:
The referenced standard has been reviewed via three stages of commenting.
7. Relationship with other existing or emerging documents:
IEEE Std 802.3-2018 is a revision of IEEE Std 802.3-2015 incorporating and superseding the following amendments and corrigendum: IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE Std 802.3bq-2016, IEEE Std 802.3bp-2016, IEEE Std 802.3br-2016, IEEE Std 802.3bn-2016, IEEE Std 802.3bz-2016, IEEE Std 802.3bu-2016, IEEE Std 802.3bv-2017, IEEE Std 802.3-2015/Cor 1-2017, IEEE Std 802.3bs-2017, IEEE Std 802.3cc-2017.
8. Any explicit references within that referenced document should also be listed:
ANSI INCITS 230-1994 (R1999), Information Technology—Fibre Channel—Physical and Signaling Interface (FC-PH) [formerly ANSI X3.230-1994 (R1999)]./
ANSI INCITS 263-1995 (S2010), Fibre Distributed Data Interface (FDDI)—Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD) [formerly INCITS 263-1995 (R2005)]./
ANSI/TIA-568-C.0 (February 2009), Generic Telecommunications Cabling for Customer Premises./
ANSI/TIA-568-C.2-1 (July 2016), Balanced Twisted-Pair Telecommunications Cabling and Components Standard, Addendum 1: Specifications for 100 Ω Next Generation Cabling./
ANSI/TIA-568-C.2 (August 2009), Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components./
ANSI/TIA-568-C.3 (June 2008), Optical Fiber Cabling Components Standard./
ANSI/TIA-604-18:2015, FOCIS 18—Fiber Optic Connector Intermateability Standard—Type MPO 16./
ANSI/TIA/EIA-455-175A-92, Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase-Shift Method./
ANSI/TIA/EIA-455-203-2001, Launched Power Distribution Measurement Procedure for Graded-Index Multimode Transmitters./
ANSI/TIA/EIA-455-204-2000, Measurement of Bandwidth on Multimode Fiber./
ANSI/TIA/EIA-568-A-1995, Commercial Building Telecommunications Cabling Standard./
ASTM D4728, Standard Test Method for Random Vibration Testing of Shipping Containers./
ATIS-0300269.2006(S2016), Structure and Representation of Trace Message Formats for Information Exchange./
ATIS-0600416.1999(R2010), Network to Customer Installation Interfaces—Synchronous Optical NETwork (SONET)—Physical Layer Specification: Common Criteria./
ATIS-0600417.2003(S2015), Spectrum Management for Loop Transmission Systems./
ATIS-0600424.2004(S2015), Interface Between Networks and Customer Installation Very-high-bit-rate Digital Subscriber Lines (VDSL) Metallic Interface (DMT based)./
ATIS-0600601.1999(S2015), Integrated Services Digital Network (ISDN)—Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification)./
ATIS-0600605.1991(S2015), Integrated Services Digital Network (ISDN)—Basic Access Interface for S and T Reference Points (Layer 1 Specification)./
ATIS-0900105.2008, Synchronous Optical Network (SONET)—Basic Description including Multiplex Structure, Rates, and Formats./
CFR 76, Code of Federal Regulations, Title 47, Part 76, October 2005./
CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment./
CISPR 25: Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers./
EIA/JEDEC Standard EIA/JESD8-6, High Speed Transceiver Logic (HSTL), August 1995./
ETSI TS 101 270-1 (1999), Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements./
IEC 60060 (all parts), High-voltage test techniques./
IEC 60068, Basic environmental testing procedures./
IEC 60068-2-1/27/30/38/52/64/78, Environmental testing./
IEC 60096-1:1986, Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993./
IEC 60169-16:1982, Radio-frequency connectors, Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristic impedance 50 ohms (75 ohms) (Type N)./
IEC 60603-7, Connectors for electronic equipment—Part 7: Detail specification for 8-way, unshielded, free and fixed connectors./
IEC 60603-7-4, Connectors for electronic equipment—Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz./
IEC 60603-7-5, Connectors for electronic equipment—Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz./
IEC 60603-7-51, Connectors for electronic equipment—Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz./
IEC 60603-7-81, Connectors for electronic equipment—Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz./
IEC 60793-1:1992, Optical fibres—Part 1: Generic specification./
IEC 60793-1:1995, Optical fibres—Part 1: Generic specification./
IEC 60793-1-41:2001, Optical fibres—Part 1-41: Measurement methods and test procedures—Bandwidth./
IEC 60793-1-41:2010, Optical fibres—Part 1-41: Measurement methods and test procedures—Bandwidth./
IEC 60793-1-42:2007, Optical fibres—Part 1-42: Measurement methods and test procedures—Chromatic dispersion./
IEC 60793-1-48:2007, Optical fibres—Part 1-48: Measurement methods and test procedures—Polarization mode dispersion./
IEC 60793-2-10, Optical fibres—Part 2-10: Product specifications—Sectional specification for category A1 multimode fibres./
IEC 60793-2:1992, Optical fibres—Part 2: Product specifications./
IEC 60793-2-40:2009, Optical fibres—Part 2-40: Product specifications—Sectional specification for category A4 multimode fibres./
IEC 60793-2-50:2008, Optical fibres—Part 2-50: Product specifications—Sectional specification for class B single-mode fibres./
IEC 60794-1:1993, Optical fibre cables—Part 1: Generic specification./
IEC 60794-1:1996, Optical fibre cables—Part 1: Generic specification./
IEC 60794-2-11:2005, Optical fibre cables—Part 2-11: Indoor cables—Detailed specification for simplex and duplex cables for use in premises cabling./
IEC 60794-2:1989, Optical fibre cables—Part 2: Product specifications./
IEC 60794-3-12:2005, Optical fibre cables—Part 3-12: Outdoor fibre cables—Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling./
IEC 60807-2:1992, Rectangular connectors for frequencies below 3 MHz, Part 2: Detail specification for a range of connectors with assessed quality, with trapezoidal shaped metal shells and round contacts—Fixed solder contact types./
IEC 60807-3:1990, Rectangular connectors for frequencies below 3 MHz, Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts—Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction./
IEC 60825-1, Safety of laser products—Part 1: Equipment classification and requirements./
IEC 60825-2, Safety of laser products—Part 2: Safety of optical fibre communication systems (OFCS)./
IEC 60874-10:1992, Connectors for optical fibres and cables—Part 10: Sectional specification, Fibre optic connector type BFOC/2,5./
IEC 60874-1:1993, Connectors for optical fibres and cables—Part 1: Generic specification./
IEC 60874-2:1993, Connectors for optical fibres and cables—Part 2: Sectional specification for fibre optic connector, Type F-SMA./
IEC 60950-1, Information technology equipment—Safety—Part 1: General requirements./
IEC 60950:1991, Safety of information technology equipment./
IEC 61000-4-2, Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques— Electrostatic discharge immunity test./
IEC 61000-4-21, Electromagnetic compatibility (EMC)—Part 4-21: Testing and measurement techniques— Reverberation chamber test methods./
IEC 61000-4-3, Electromagnetic compatibility (EMC)—Part 4-3: Testing and measurement techniques— Radiated, radio-frequency, electromagnetic field immunity test./
IEC 61076-3-101:1997, Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications—Part 3: Rectangular connectors—Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1.27 mm ´ 2.54 mm centre-line./
IEC 61076-3-103 (48B/574/NP), Detail specification for rectangular connectors, with assessed quality, 6 and 8 way, fixed and free shielded connectors with ribbon contacts for high speed data applications./
IEC 61076-3-113, Ed. 1.0 (draft, 48B/1437/CD, 2 April 2004.) [48B Secretariat 1327] Connectors for electronic equipment—Part 3-113: Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates./
IEC 61169-24:2009, Radio-frequency connectors—Part 24: Sectional specification—Radio frequency coaxial connectors with screw coupling, typically for use in 75 W cable networks (type F)./
IEC 61196-1:1995, Radio-frequency cables—Part 1: Generic specification—General, definitions, requirements and test methods./
IEC 61280-1-1:1998, Fibre optic communication subsystem basic test procedures—Part 1-1: Test procedures for general communication subsystems—Transmitter output optical power measurement for single-mode optical fibre cable./
IEC 61280-1-3:2010, Fibre optic communication subsystem test procedures—Part 1-3: General communication subsystems—Central wavelength and spectral width measurement./
IEC 61280-1-4:2003, Fibre optic communication subsystem test procedures—Part 1-4: General communication subsystems—Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters. /
IEC 61280-1-4:2009, Fibre optic communication subsystem test procedures—Part 1-4: General communication subsystems—Light source encircled flux measurement method./
IEC 61280-2-2:2008, Fiber optic communication sub-system basic test procedures—Part 2-2: Test procedures for digital systems—Optical eye pattern, waveform, and extinction ratio./
IEC 61280-4-1:2003, Fiber-optic communication subsystem test procedures—Part 4-1: Cable plant and links—Multimode fibre-optic cable plant attenuation measurement./
IEC 61280-4-1:2009, Fibre-optic communication subsystem test procedures—Part 4-1: Installed cable plant —Multimode attenuation measurement./
IEC 61280-4-2:2000, Fibre optic communication subsystem basic test procedures—Fibre optic cable plant—Single-mode fibre optic cable plant attenuation./
IEC 61300-2-4, Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-4: Tests—Fibre/cable retention./
IEC 61300-3-53, Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-53: Examinations and measurements—Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre)./
IEC 61753-021-2:2002, Fibre optic passive component performance standard—Part 021-2: Fibre optic connectors terminated on single-mode fibre to category C Controlled environment./
IEC 61753-021-2:2007, Fibre optic interconnecting devices and passive components performance standard—Part 021-2: Grade C/3 single-mode fibre optic connectors for category C—Controlled environment./
IEC 61753-022-2, Performance standard—Part 022-2: Fibre optic connectors terminated on multimode fibre for Category C—Controlled environment, performance Class M./
IEC 61753-1-1:2000, Fibre optic interconnecting devices and passive components performance standard—Part 1-1: General and guidance—Interconnecting devices (connectors)./
IEC 61753-1:2007, Fibre optic interconnecting devices and passive components performance standard—Part 1: General and guidance for performance standards./
IEC 61754-1:1996, Fibre optic interfaces —Part 1: General and guidance./
IEC 61754-4:1997, Fibre optic connector interfaces—Part 4: Type SC connector family./
IEC 61754-7, Fibre optic connector interfaces—Part 7: Type MPO connector family./
IEC 61754-7-1:2014, Fibre optic interconnecting devices and passive components—Fibre optic connector interfaces—Part 7-1: Type MPO connector family—One fibre row./
IEC 61967-1, Integrated circuits—Measurement of electromagnetic emissions, 150 kHz to 1 GHz—Part 1: General conditions and definitions./
IEC 61967-4, Integrated circuits—Measurement of electromagnetic emissions, 150 kHz to 1 GHz—Part 4: Measurement of conducted emissions—1 W/150 W direct coupling method./
IEC 62132-1, Integrated circuits—Measurement of electromagnetic immunity, 150 kHz to 1 GHz—Part 1: General conditions and definitions./
IEC 62132-4, Integrated circuits—Measurements of electromagnetic immunity 150 kHz to 1 GHz—Part 4: Direct RF power injection method./
IEC 62153-4-14:2012, Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (Field conditions) absorbing clamp method./
IEC 62215-3, Integrated circuits—Measurement of impulse immunity—Part 3: Non-synchronous transient injection method./
IEEE Std 1394™-1995 IEEE Standard for a High Performance Serial Bus./
IEEE Std 802®, IEEE Standard for Local and Metropolitan Area Networks—Overview and Architecture./
IEEE Std 802.1AB™-2009, IEEE Standard for Local and metropolitan area networks—Station and Media Access Control Connectivity Discovery./
IEEE Std 802.1AS™-2011, IEEE Standard for Local and metropolitan area networks—Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks./
IEEE Std 802.1D™, IEEE Standard for Local and metropolitan area networks—Media Access Control (MAC) Bridges./
IEEE Std 802.1F™-1993, IEEE Standard for Local and Metropolitan Area Networks—Common Definitions and Procedures for IEEE 802 Management Information./
IEEE Std 802.1Q™, Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks./
IEEE Std 802.3.1™, IEEE Standard for Management Information Base (MIB) Module Definitions for Ethernet./
IEEE Std 802.5v™-2001, IEEE Standard for Information Technology—Telecommunications and Information Exchange Between Systems—Local and Metropolitan Area Network—Specific Requirements. Part 5: Token Ring Access Method and Physical Layer Specifications. Amendment 5: Gigabit Token Ring Operation./
IEEE Std 802.9a™-1995, Local and Metropolitan Area Networks—802.9 Supplement—IEEE Standard Specification of ISLAN 16-T (supplement to 802.9-1994)./
IETF RFC 3621 (December 2003), Power Ethernet MIB, Berger, A., and Romascanu, D./
IETF RFC 4836 (April 2007), Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs), Beili, E./
ISO 10605:2008, Road vehicles—Test methods for electrical disturbances from electrostatic discharge./
ISO 11452, Road vehicles—Component test methods for electrical disturbances from narrowband radiated electromagnetic energy./
ISO 12103-1:1997, Road vehicles—Test dust for filter evaluation—Part 1: Arizona test dust./
ISO 16750-1:2006, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 1: General./
ISO 16750-2:2012, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2: Electrical loads./
ISO 16750-3:2012, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 3: Mechanical loads./
ISO 16750-4:2010, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 4: Climatic loads./
ISO 16750-5: 2010, Road vehicles—Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads./
ISO 20653:2013, Road vehicles—Degrees of protection (IP code)—Protection of electrical equipment against foreign objects, water and access./
ISO 26262, Road vehicles—Functional safety./
ISO 7637-2:2008, Road vehicles—Electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only./
ISO 7637-3:2007, Road vehicles—Electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines./
ISO 8820-1:2014, Road vehicles—Fuse-links—Part 1: Definitions and general test requirements./
ISO/IEC 10040:1992, Information technology—Open Systems Interconnection—Systems management overview./
ISO/IEC 10165-2:1992, Information technology—Open Systems Interconnection—Structure of management information: Definition of management information./
ISO/IEC 10165-4:1992, Information technology—Open Systems Interconnection—Management information services—Structure of management information—Part 4: Guidelines for the definition of managed objects./
ISO/IEC 11801:1995, Information technology—Generic cabling for customer premises./
ISO/IEC 11801:2002, Information technology—Generic cabling for customer premises./
ISO/IEC 11801:2002 Amendment 1:2008, Information technology—Generic cabling for customer premises./
ISO/IEC 11801:2002 Amendment 2:2010, Information technology—Generic cabling for customer premises./
ISO/IEC 14763-3:2014, Information technology—Implementation and operation of customer premises cabling—Part 3: Testing of optical fibre cabling./
ISO/IEC 15802-1:1995, Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—Common specifications—Part 1: Medium Access Control (MAC) service definition./
ISO/IEC 7498-1:1994, Information technology—Open Systems Interconnection—Basic Reference Model: The Basic Model./
ISO/IEC 7498-4:1989, Information processing systems—Open Systems Interconnection—Basic Reference Model—Part 4: Management Framework./
ISO/IEC 8802-2:1998, Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—Specific requirements—Part 2: Logical link control./
ISO/IEC 8824:1990, Information technology—Open Systems Interconnection—Specification of Abstract Syntax Notation One (ASN.1)./
ISO/IEC 9314-1:1989, Information processing systems—Fibre Distributed Data Interface (FDDI)—Part 1: Token Ring Physical Layer Protocol (PHY)./
ISO/IEC 9314-2:1989, Information processing systems—Fibre Distributed Data Interface (FDDI)—Part 2: Token Ring Media Access Control (MAC)./
ISO/IEC 9314-3:1990, Information processing systems—Fibre Distributed Data Interface (FDDI)—Part 3: Physical Layer Medium Dependent (PMD)./
ISO/IEC 9646-1:1994, Information technology—Open Systems Interconnection—Conformance testing methodology and framework—Part 1: General concepts./
ISO/IEC 9646-2:1994, Information technology—Open Systems Interconnection—Conformance testing methodology and framework—Part 2: Abstract test suite specification./
ISO/IEC DIS 11801-1:2016, Information technology–Generic cabling for customer premises–Part 1: General Requirements./
ISO/IEC TR 24750:2007, Information technology—Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T./
ITU-T Recommendation G.650.1, 2010—Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable./
ITU-T Recommendation G.652, 2009—Characteristics of a single-mode optical fibre and cable./
ITU-T Recommendation G.657, 2009—Characteristics of a bending-loss insensitive single-mode optical fibre and cable for the access network./
ITU-T Recommendation G.671, 2009—Transmission characteristics of optical components and subsystems./
ITU-T Recommendation G.691, 2006—Optical interfaces for single channel STM-64 and other SDH systems with optical amplifiers./
ITU-T Recommendation G.694.1—Spectral grids for WDM applications: DWDM frequency grid./
ITU-T Recommendation G.694.2—Spectral grids for WDM applications: CWDM wavelength grid./
ITU-T Recommendation G.695, 2010—Optical interfaces for coarse wavelength division multiplexing applications./
ITU-T Recommendation G.957, 2006—Optical interfaces for equipments and systems relating to the synchronous digital hierarchy./
ITU-T Recommendation G.959.1, 2009—Optical transport network physical layer interfaces./
ITU-T Recommendation G.975—Forward error correction for submarine systems./
ITU-T Recommendation G.991.2, 2001—Amendment 1./
ITU-T Recommendation G.991.2, 2001—Single-pair high-speed digital subscriber line (SHDSL) transceivers./
ITU-T Recommendation G.993.1, 2001—Very high speed digital subscriber line foundation./
ITU-T Recommendation G.993.1, 2003—Amendment 1./
ITU-T Recommendation G.994.1, 2004—Handshake procedures for digital subscriber line (DSL) transceivers./
ITU-T Recommendation I.430, 1995—Basic user-network interface—Layer 1 specification./
ITU-T Recommendation O.150, 1996—General requirements for instrumentation for performance measurements on digital transmission equipment./
ITU-T Recommendation O.153, 1992—Basic parameters for the measurement of error performance at bit rates below the primary rate./
ITU-T Recommendation O.172, 2005—Jitter and wander measuring equipment for digital systems which are based on the synchronous digital hierarchy (SDH)./
MATLAB Matrix Laboratory Software./
SAE J1292, Automobile and Motor Coach Wiring./
SCTE 02 2006, Specification for “F” Port, Female, Indoor./
SFF-8402, Rev 1.1, September 13, 2014, Specification for SFP+ 1X 28 Gb/s Pluggable Transceiver Solution (SFP28)./
SFF-8432, Rev 5.1, August 8, 2012, Specification for SFP+ Module and Cage./
SFF-8436, Rev 4.8, October 31, 2013, Specification for QSFP+ 10 Gb/s 4X Pluggable Transceiver./
SFF-8642, Rev 3.2, January 26, 2017, Specification for Mini Multilane 12X 10 Gb/s Shielded Connector (CXP10)./
SFF-8665, Rev 1.9, June 29, 2015, Specification for QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28)./
TIA TSB-155-A-2010, Guidelines for the Assessment and Mitigation of Installed Category 6 Cabling to Support 10GBASE-T./
TIA TSB-5021, Guidelines for the Assessment and Mitigation of Installed Cabling to Support 2.5GBASE-T and 5GBASE-T./
9. Qualification of IEEE:
The IEEE was recognized under the provisions of ITU-T Recommendation A.5 on 1 November 1999. Qualifying information is on file with TSB.
10. Other (for any supplementary information):
None.
Note: This form is based on Recommendation ITU-T A.5