|
1.
|
Clear description of the referenced document:
|
|
|
|
Name:
|
IEEE 1588-2019
|
|
Title:
|
Standard for Synchronizing Clocks - This standard defines a protocol to synchronize independent clocks running on separate nodes of a distributed measurement and control system to a high degree of accuracy and precision. The protocol is independent of the networking technology, and the system topology is self-configuring.
|
|
|
2.
|
Status of approval:
|
|
|
Approved as standard.
|
|
3.
|
Justification for the specific reference:
|
|
|
IEEE standard since 2002. Updated in 2008. Updated in 2019.
|
|
4.
|
Current information, if any, about IPR issues:
|
|
|
No known issues.
|
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
|
IEEE standard since 2002. Updated in 2008. Updated in 2019.
|
|
6.
|
The degree of stability or maturity of the document:
|
|
|
IEEE standard since 2002. Updated in 2008. Updated in 2019.
|
|
7.
|
Relationship with other existing or emerging documents:
|
|
|
None
|
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
|
IEEE Std 754™, IEEE Standard for Binary Floating-Point Arithmetic./
/
IEEE Std 802®, IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture./
/
IEEE Std 802.1AS™-2011, IEEE Standard for Local and Metropolitan Area Networks—Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks./
/
IEEE Std. 802c™, Standard for Local and Metropolitan Area Networks—Overview and Architecture Amendment: Local Medium Access Control (MAC) Address Usage./
/
IEEE Std 802.1Q™ -2014, IEEE Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks./
/
IEEE Std 802.3™, IEEE Standard for Ethernet./
/
IEEE Std. 802.11™, IEEE Standard for Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—Specific requirements— Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications./
/
IEC 61158-5-10:2007, Industrial communication networks—Fieldbus specifications—Part 5-10: Application layer service definition—Type 10 elements./
/
IEC 61158-6-10:2007, Industrial communication networks—Fieldbus specifications—Part 6-10: Application layer protocol specification—Type 10 elements./
/
IEC 61784-1:2007, Industrial communication networks—Profiles—Part 1: Fieldbus profiles./
/
IEC 61784-2:2007, Industrial communications networks—Profiles—Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3./
/
IEC 62026-3:2008, Low-voltage switchgear and controlgear—Controller-device interfaces (CDIs)—Part 3: DeviceNet./
/
ISO/IEC 10646:2003, Information technology—Universal Multiple-Octet Coded Character Set (UCS)—Part 1: Architecture and Basic Multilingual Plane./
/
IERS Bulletin C.5/
/
IETF RFC 768 (1980), User Datagram Protocol, Postel, J., ed./
/
IETF RFC 791 (1981), Internet Protocol, Postel, J., ed./
/
IETF RFC 1624 (1994), Computation of the Internet Checksum via Incremental Update, Rijsinghani, A., ed./
/
IETF RFC 4868 (2007), Using HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512 with IPsec, Kelly, S., and Frankel, S., eds./
/
IETF RFC 8200 (2017), Internet Protocol, Version 6 (IPv6) Specification, Deering, S., and Hinden, R., eds./
/
FIPS PUB 180-4:2015, Secure Hash Standard./
/
FIPS PUB 198-1:2008, The Keyed-Hash Message Authentication Code (HMAC)./
/
|
|
9.
|
Qualification of
IEEE:
|
|
|
The IEEE was recognized under the provisions of ITU-T Recommendation A.5 on 1 November 1999. Qualifying information is on file with TSB.
|
|
10.
|
Other (for any supplementary information):
|
|
|
None
|
|
