|
1.
|
Clear description of the referenced document:
|
|
|
|
|
2.
|
Status of approval:
|
|
|
The referenced integrated version of the IEEE802.3 standard was approved in 2022.
|
|
3.
|
Justification for the specific reference:
|
|
|
G.709.20 refers to IEEE 802.3-2022 in clause B.3.1. G.709.20 describes Ethernet packet services encoding of 64B/66B according to IEEE 802.3-2022 clause 82.
|
|
4.
|
Current information, if any, about IPR issues:
|
|
|
No known issues.
|
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
|
The referenced standard has completed the rigorous and comprehensive review and approval process of the IEEE standards development committee. It was approved and published in 2022.
|
|
6.
|
The degree of stability or maturity of the document:
|
|
|
The referenced standard has completed the rigorous and comprehensive review and approval process of the IEEE standards development committee. It was first approved and published in 1990, and this was approved and published in 2022.
|
|
7.
|
Relationship with other existing or emerging documents:
|
|
|
None.
|
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
|
ANSI INCITS 230-1994 (R1999), Information Technology—Fibre Channel—Physical and Signaling Interface (FC-PH) [formerly ANSI X3.230-1994 (R1999)]./
ANSI INCITS 263-1995 (S2010), Fibre Distributed Data Interface (FDDI)—Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD) [formerly INCITS 263-1995 (R2005)]./
ANSI/TIA-568-C.0 (February 2009), Generic Telecommunications Cabling for Customer Premises./
ANSI/TIA-568-C.2-1 (July 2016), Balanced Twisted-Pair Telecommunications Cabling and Components Standard, Addendum 1: Specifications for 100 Ω Next Generation Cabling./
ANSI/TIA-568-C.2 (August 2009), Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components./
ANSI/TIA-568-C.3 (June 2008), Optical Fiber Cabling Components Standard./
ANSI/TIA-568.0-D, Generic Telecommunications Cabling for Customer Premises. /
ANSI/TIA-604-18:2015, FOCIS 18—Fiber Optic Connector Intermateability Standard—Type MPO-16. /
ANSI/TIA-604-18-A:2018, FOCIS 18—Fiber Optic Connector Intermateability Standard—Type MPO-16./
ANSI/TIA/EIA-455-95-2019, Absolute Optical Power Test for Optical Fibers and Cables./
ANSI/TIA/EIA-455-204-2013, Measurement of Bandwidth on Multimode Fiber./
ANSI/TIA/EIA-568-A-1995, Commercial Building Telecommunications Cabling Standard./
ASTM D4728, Standard Test Method for Random Vibration Testing of Shipping Containers./
ATIS-0300269.2006(S2016), Structure and Representation of Trace Message Formats for Information Exchange./
ATIS-0600416.1999(R2010), Network to Customer Installation Interfaces—Synchronous Optical NETwork (SONET)—Physical Layer Specification: Common Criteria./
ATIS-0600417.2003(S2015), Spectrum Management for Loop Transmission Systems./
ATIS-0600424.2004(S2015), Interface Between Networks and Customer Installation Very-high-bit-rate Digital Subscriber Lines (VDSL) Metallic Interface (DMT based)./
ATIS-0600601.1999(S2015), Integrated Services Digital Network (ISDN)—Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification)./
ATIS-0600605.1991(S2015), Integrated Services Digital Network (ISDN)—Basic Access Interface for S and T Reference Points (Layer 1 Specification)./
ATIS-0900105.2008, Synchronous Optical Network (SONET)—Basic Description including Multiplex Structure, Rates, and Formats./
CFR 76, Code of Federal Regulations, Title 47, Part 76, October 2005./
CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment./
CISPR 25: Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers./
EIA/JEDEC Standard EIA/JESD8-6, High Speed Transceiver Logic (HSTL), August 1995./
ETSI TS 101 270-1 (1999), Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements./
IEC 60060 (all parts), High-voltage test techniques./
IEC 60068, Basic environmental testing procedures./
IEC 60068-2-1:2007, Environmental testing—Part 2-1: Tests—Test A: Cold./
IEC 60068-2-2:2007, Environmental testing—Part 2-2: Tests—Test B: Dry heat./
IEC 60068-2-6:2007, Environmental testing—Part 2-6: Tests—Test Fc: Vibration (sinusoidal)./
IEC 60068-2-14:2009, Environmental testing—Part 2-14: Tests—Test N: Change of temperature./
IEC 60068-2-27:2008, Environmental testing—Part 2-27: Tests—Test Ea and guidance: Shock./
IEC 60068-2-30:2005, Environmental testing—Part 2-30: Tests—Test Db: Damp heat, cyclic (12 h + 12 h cycle)./
IEC 60068-2-31:2008, Environmental testing—Part 2-31: Tests—Test Ec: Rough handling shocks, primarily for equipment-type specimens./
IEC 60068-2-38:2009, Environmental testing—Part 2-38: Tests—Test Z/AD: Composite temperature/ humidity cyclic test./
IEC 60068-2-52:2017, Environmental testing—Part 2-52: Tests—Test Kb: Salt mist, cyclic (sodium chloride solution)./
IEC 60068-2-64:2008, Environmental testing—Part 2-64: Tests—Test Fh: Vibration, broadband random and guidance./
IEC 60068-2-78:2012, Environmental testing—Part 2-78: Tests—Test Cab: Damp heat, steady state./
IEC 60079-0:2017, Explosive atmospheres—Part 0: Equipment—General requirements./
IEC 60079-11:2011, Explosive Atmospheres—Part 11: Equipment protection by intrinsic safety./
IEC 60096-1:1986, Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993./
IEC 60169-16:1982, Radio-frequency connectors, Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristic impedance 50 ohms (75 ohms) (Type N)./
IEC 60529:2013, Degrees of Protection Provided by Enclosures (IP Code)./
IEC 60603-7, Connectors for electronic equipment—Part 7: Detail specification for 8-way, unshielded, free and fixed connectors./
IEC 60603-7-4, Connectors for electronic equipment—Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz./
IEC 60603-7-5, Connectors for electronic equipment—Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz./
IEC 60603-7-51, Connectors for electronic equipment—Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz./
IEC 60603-7-81, Connectors for electronic equipment—Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz./
IEC 60793-1:1992, Optical fibres—Part 1: Generic specification./
IEC 60793-1:1995, Optical fibres—Part 1: Generic specification./
IEC 60793-1-41:2001, Optical fibres—Part 1-41: Measurement methods and test procedures—Bandwidth./
IEC 60793-1-41:2010, Optical fibres—Part 1-41: Measurement methods and test procedures—Bandwidth./
IEC 60793-1-42, Optical fibres—Part 1-42: Measurement methods and test procedures—Chromatic dispersion./
IEC 60793-1-48:2007, Optical fibres—Part 1-48: Measurement methods and test procedures—Polarization mode dispersion./
IEC 60793-2-10, Optical fibres—Part 2-10: Product specifications—Sectional specification for category A1 multimode fibres./
IEC 60793-2:1992, Optical fibres—Part 2: Product specifications./
IEC 60793-2-40:2009, Optical fibres—Part 2-40: Product specifications—Sectional specification for category A4 multimode fibres./
IEC 60793-2-50:2008, Optical fibres—Part 2-50: Product specifications—Sectional specification for class B single-mode fibres./
IEC 60794-1:1993, Optical fibre cables—Part 1: Generic specification. IEC 60794-1:1996, Optical fibre cables—Part 1: Generic specification./
IEC 60794-2-11:2005, Optical fibre cables—Part 2-11: Indoor cables—Detailed specification for simplex and duplex cables for use in premises cabling./
IEC 60794-2:1989, Optical fibre cables—Part 2: Product specifications./
IEC 60794-3-12:2005, Optical fibre cables—Part 3-12: Outdoor fibre cables—Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling./
IEC 60807-2:1992, Rectangular connectors for frequencies below 3 MHz, Part 2: Detail specification for a range of connectors with assessed quality, with trapezoidal shaped metal shells and round contacts—Fixed solder contact types./
IEC 60807-3:1990, Rectangular connectors for frequencies below 3 MHz, Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts—Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction./
IEC 60825-1, Safety of laser products—Part 1: Equipment classification and requirements./
IEC 60825-2, Safety of laser products—Part 2: Safety of optical fibre communication systems (OFCS)./
IEC 60874-10:1992, Connectors for optical fibres and cables—Part 10: Sectional specification, Fibre optic connector type BFOC/2,5./
IEC 60874-1:1993, Connectors for optical fibres and cables—Part 1: Generic specification./
IEC 60874-2:1993, Connectors for optical fibres and cables—Part 2: Sectional specification for fibre optic connector, Type F-SMA./
IEC 60950-1, Information technology equipment—Safety—Part 1: General requirements. IEC 60950:1991, Safety of information technology equipment./
IEC 61000-4-2, Electromagnetic compatibility (EMC)—Part 4-2: Testing and measurement techniques— Electrostatic discharge immunity test./
IEC 61000-4-21, Electromagnetic compatibility (EMC)—Part 4-21: Testing and measurement techniques— Reverberation chamber test methods./
IEC 61000-4-3, Electromagnetic compatibility (EMC)—Part 4-3: Testing and measurement techniques— Radiated, radio-frequency, electromagnetic field immunity test./
IEC 61000-4-4:2012, Electromagnetic compatibility (EMC)—Part 4-4: Testing and measurement techniques—Electrical fast transient/burst immunity test./
IEC 61000-4-5:2017, Electromagnetic compatibility (EMC)—Part 4-5: Testing and measurement techniques—Surge immunity test./
IEC 61000-4-6:2013, Electromagnetic compatibility (EMC)—Part 4-6: Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields./
IEC 61000-6-4:2018, Electromagnetic compatibility (EMC)—Part 6-4: Generic standards—Emission standard for industrial environments./
IEC 61010-1:2017, Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1: General requirements./
IEC 61076-3-101:1997, Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications—Part 3: Rectangular connectors—Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1.27 mm 2.54 mm centre-line./
IEC 61076-3-103 (48B/574/NP), Detail specification for rectangular connectors, with assessed quality, 6 and 8 way, fixed and free shielded connectors with ribbon contacts for high speed data applications./
IEC 61169-24:2009, Radio-frequency connectors—Part 24: Sectional specification—Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)./
IEC 61196-1:1995, Radio-frequency cables—Part 1: Generic specification—General, definitions, requirements and test methods./
IEC 61280-1-1:1998, Fibre optic communication subsystem basic test procedures—Part 1-1: Test procedures for general communication subsystems—Transmitter output optical power measurement for single-mode optical fibre cable./
IEC 61280-1-3:2010, Fibre optic communication subsystem test procedures—Part 1-3: General communication subsystems—Central wavelength and spectral width measurement./
IEC 61280-1-4:2003, Fibre optic communication subsystem test procedures—Part 1-4: General communication subsystems—Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters./
IEC 61280-1-4:2009, Fibre optic communication subsystem test procedures—Part 1-4: General communication subsystems—Light source encircled flux measurement method./
IEC 61280-2-2:2008, Fiber optic communication sub-system basic test procedures—Part 2-2: Test procedures for digital systems—Optical eye pattern, waveform, and extinction ratio./
IEC 61280-4-1:2019+AMD1:2021, Fibre-optic communication subsystem test procedures—Part 4-1: Installed cable plant —Multimode attenuation measurement./
IEC 61280-4-2:2000, Fibre optic communication subsystem basic test procedures—Fibre optic cable plant—Single-mode fibre optic cable plant attenuation./
IEC 61300-2-4, Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 2-4: Tests—Fibre/cable retention./
IEC 61300-3-53, Fibre optic interconnecting devices and passive components—Basic test and measurement procedures—Part 3-53: Examinations and measurements—Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre)./
IEC 61326-1:2012, Electrical equipment for measurement, control and laboratory use—EMC requirements—Part 1: General requirements./
IEC 61753-021-2:2002, Fibre optic passive component performance standard—Part 021-2: Fibre optic connectors terminated on single-mode fibre to category C Controlled environment./
IEC 61753-021-2:2007, Fibre optic interconnecting devices and passive components performance standard—Part 021-2: Grade C/3 single-mode fibre optic connectors for category C—Controlled environment./
IEC 61753-022-2:2012, Fibre optic interconnecting devices and passive components—Performance standard—Part 022-2: Fibre optic connectors terminated on multimode fibre for Category C—Controlled environment./
IEC 61753-1-1:2000, Fibre optic interconnecting devices and passive components performance standard— Part 1-1: General and guidance—Interconnecting devices (connectors)./
IEC 61753-1:2007, Fibre optic interconnecting devices and passive components performance standard— Part 1: General and guidance for performance standards./
IEC 61754-1:1996, Fibre optic interfaces —Part 1: General and guidance./
IEC 61754-4:1997, Fibre optic connector interfaces—Part 4: Type SC connector family./
IEC 61754-7, Fibre optic connector interfaces—Part 7: Type MPO connector family./
IEC 61754-7-1:2014, Fibre optic interconnecting devices and passive components—Fibre optic connector interfaces—Part 7-1: Type MPO connector family—One fibre row./
IEC 61754-7-2:2017, Fibre optic interconnecting devices and passive components—Fibre optic connector interfaces—Part 7-2: Type MPO connector family—Two fibre rows./
IEC 61967-1, Integrated circuits—Measurement of electromagnetic emissions, 150 kHz to 1 GHz—Part 1: General conditions and definitions./
IEC 61967-4, Integrated circuits—Measurement of electromagnetic emissions, 150 kHz to 1 GHz—Part 4: Measurement of conducted emissions—1 /150 direct coupling method./
IEC 62132-1, Integrated circuits—Measurement of electromagnetic immunity, 150 kHz to 1 GHz—Part 1: General conditions and definitions./
IEC 62132-4, Integrated circuits—Measurements of electromagnetic immunity 150 kHz to 1 GHz—Part 4: Direct RF power injection method./
IEC 62153-4-14:2012, Metallic communication cable test methods—Part 4-14: Electromagnetic compatibil- ity (EMC)—Coupling attenuation of cable assemblies (Field conditions) absorbing clamp method./
IEC62153-4-7, Metallic communication cable test methods—Part4-7: Electromagnetic compatibility (EMC)—Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC of connectors and assemblies up to and above 3 GHz—Triaxial tube in tube method./
IEC 62215-3, Integrated circuits—Measurement of impulse immunity—Part 3: Non-synchronous transient injection method./
IEC 62368-1:2018, Audio/video, information and communication technology equipment—Part 1: Safety requirements./
IEEE Std 1394TM-1995 IEEE Standard for a High Performance Serial Bus./
IEEE Std 802®, IEEE Standard for Local and Metropolitan Area Networks—Overview and Architecture./
IEEE Std 802.1ABTM-2009, IEEE Standard for Local and metropolitan area networks—Station and Media Access Control Connectivity Discovery./
IEEE Std 802.1ACTM, IEEE Standard for Local and metropolitan area networks—Media Access Control (MAC) Service Definition./
IEEE Std 802.1ASTM-2011, IEEE Standard for Local and metropolitan area networks—Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks./
IEEE Std 802.1FTM-1993, IEEE Standard for Local and Metropolitan Area Networks—Common Definitions and Procedures for IEEE 802 Management Information./
IEEE Std 802.1QTM, Standard for Local and Metropolitan Area Networks—Bridges and Bridged Networks./
IEEE Std 802.3.1TM, IEEE Standard for Management Information Base (MIB) Module Definitions for Ethernet./
IEEE Std 802.5vTM-2001, IEEE Standard for Information Technology—Telecommunications and Information Exchange Between Systems—Local and Metropolitan Area Network—Specific Requirements. Part 5: Token Ring Access Method and Physical Layer Specifications. Amendment 5: Gigabit Token Ring Operation./
IEEE Std 802.9aTM-1995, Local and Metropolitan Area Networks—802.9 Supplement—IEEE Standard Specification of ISLAN 16-T (supplement to 802.9-1994)./
IETF RFC 3621 (December 2003), Power Ethernet MIB, Berger, A., and Romascanu, D./
IETF RFC 4836 (April 2007), Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units/
(MAUs), Beili, E./
ISO 10605:2008, Road vehicles—Test methods for electrical disturbances from electrostatic discharge./
ISO 11452, Road vehicles—Component test methods for electrical disturbances from narrowband radiated electromagnetic energy./
ISO 12103-1:1997, Road vehicles—Test dust for filter evaluation—Part 1: Arizona test dust./
ISO 16750-1:2006, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 1: General./
ISO 16750-2:2012, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 2: Electrical loads./
ISO 16750-3:2012, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 3: Mechanical loads./
ISO 16750-4:2010, Road vehicles—Environmental conditions and testing for electrical and electronic equipment—Part 4: Climatic loads./
ISO 16750-5: 2010, Road vehicles—Environmental conditions and testing for electrical and electronic equipment - Part 5: Chemical loads./
ISO 20653:2013, Road vehicles—Degrees of protection (IP code)—Protection of electrical equipment against foreign objects, water and access./
ISO 26262, Road vehicles—Functional safety./
ISO 4892:1982, Plastics—Methods of exposure to laboratory light./
ISO 7637-2:2008, Road vehicles—Electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only./
ISO 7637-3:2007, Road vehicles—Electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines./
ISO 8820-1:2014, Road vehicles—Fuse-links—Part 1: Definitions and general test requirements./
ISO/IEC 10040:1992, Information technology—Open Systems Interconnection—Systems management overview./
ISO/IEC 10165-2:1992, Information technology—Open Systems Interconnection—Structure of management information: Definition of management information./
ISO/IEC 10165-4:1992, Information technology—Open Systems Interconnection—Management information services—Structure of management information—Part 4: Guidelines for the definition of managed objects./
ISO/IEC 11801:1995, Information technology—Generic cabling for customer premises./
ISO/IEC 11801:2002, Information technology—Generic cabling for customer premises./
ISO/IEC 11801:2002 Amendment 1:2008, Information technology—Generic cabling for customer premises./
ISO/IEC 11801:2002 Amendment 2:2010, Information technology—Generic cabling for customer premises./
ISO/IEC 14763-3:2014, Information technology—Implementation and operation of customer premises cabling—Part 3: Testing of optical fibre cabling./
ISO/IEC 7498-1:1994, Information technology—Open Systems Interconnection—Basic Reference Model: The Basic Model./
ISO/IEC 7498-4:1989, Information processing systems—Open Systems Interconnection—Basic Reference Model—Part 4: Management Framework./
ISO/IEC 8802-2:1998, Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—Specific requirements—Part 2: Logical link control./
ISO/IEC 8824:1990, Information technology—Open Systems Interconnection—Specification of Abstract Syntax Notation One (ASN.1)./
ISO/IEC 9314-1:1989, Information processing systems—Fibre Distributed Data Interface (FDDI)—Part 1: Token Ring Physical Layer Protocol (PHY)./
ISO/IEC 9314-2:1989, Information processing systems—Fibre Distributed Data Interface (FDDI)—Part 2: Token Ring Media Access Control (MAC)./
ISO/IEC 9314-3:1990, Information processing systems—Fibre Distributed Data Interface (FDDI)—Part 3: Physical Layer Medium Dependent (PMD)./
ISO/IEC 9646-1:1994, Information technology—Open Systems Interconnection—Conformance testing methodology and framework—Part 1: General concepts./
ISO/IEC 9646-2:1994, Information technology—Open Systems Interconnection—Conformance testing methodology and framework—Part 2: Abstract test suite specification./
ISO/IEC DIS 11801-1:2016, Information technology–Generic cabling for customer premises–Part 1: General Requirements./
ISO/IEC TR 24750:2007, Information technology—Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T./
ITU-T Recommendation G.650.1, 2010—Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable.25/
ITU-T Recommendation G.652, 2016—Characteristics of a single-mode optical fibre and cable./
ITU-T Recommendation G.657, 2016—Characteristics of a bending-loss insensitive single-mode optical fibre and cable./
ITU-T Recommendation G.671, 2009—Transmission characteristics of optical components and subsystems./
ITU-T Recommendation G.691, 2006—Optical interfaces for single channel STM-64 and other SDH systems with optical amplifiers./
ITU-T Recommendation G.694.1—Spectral grids for WDM applications: DWDM frequency grid. ITU-T Recommendation G.694.2—Spectral grids for WDM applications: CWDM wavelength grid./
ITU-T Recommendation G.695, 2010—Optical interfaces for coarse wavelength division multiplexing applications./
ITU-T Recommendation G.698.2—Amplified multichannel dense wavelength division multiplexing applications with single channel optical interfaces./
ITU-T Recommendation G.709—Interfaces for the optical transport network. ITU-T Recommendation G.709.2—OTU4 long-reach interface./
ITU-T Recommendation G.957, 2006—Optical interfaces for equipments and systems relating to the synchronous digital hierarchy./
ITU-T Recommendation G.959.1, 2009—Optical transport network physical layer interfaces./
ITU-T Recommendation G.975—Forward error correction for submarine systems./
ITU-T Recommendation G.991.2, 2001—Amendment 1./
ITU-T Recommendation G.991.2, 2001—Single-pair high-speed digital subscriber line (SHDSL) transceivers./
ITU-T Recommendation G.993.1, 2001—Very high speed digital subscriber line foundation. ITU-T Recommendation G.993.1, 2003—Amendment 1./
ITU-T Recommendation G.994.1, 2004—Handshake procedures for digital subscriber line (DSL) transceivers./
ITU-T Recommendation I.430, 1995—Basic user-network interface—Layer 1 specification./
ITU-T Recommendation K.44, 2019—Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents—Basic Recommendation./
ITU-T Recommendation O.150, 1996—General requirements for instrumentation for performance measurements on digital transmission equipment./
ITU-T Recommendation O.153, 1992—Basic parameters for the measurement of error performance at bit rates below the primary rate./
ITU-T Recommendation O.172, 2005—Jitter and wander measuring equipment for digital systems which are based on the synchronous digital hierarchy (SDH)./
MATLAB Matrix Laboratory Software./
NAMUR NE 021:2017, Electromagnetic Compatibility of Equipment for Industrial Processes and Laboratory./
SAE J1292, Automobile and Motor Coach Wiring./
SCTE 02 2006, Specification for “F” Port, Female, Indoor./
SFF-8402, Rev 1.1, September 13, 2014, Specification for SFP+ 1X 28 Gb/s Pluggable Transceiver Solution (SFP28)./
SFF-8432, Rev 5.1, August 8, 2012, Specification for SFP+ Module and Cage./
SFF-8436, Rev 4.8, October 31, 2013, Specification for QSFP+ 10 Gb/s 4X Pluggable Transceiver./
SFF-8470, Rev 3.3, April 3, 2006, Specification for Shielded High Speed Serial Multilane Copper Connector./
SFF-8482, Specification for Serial Attachment 2X Unshielded Connector./
SFF-8642, Rev 3.2, January 26, 2017, Specification for Mini Multilane 12X 10 Gb/s Shielded Connector (CXP10)./
SFF-8665, Rev 1.9, June 29, 2015, Specification for QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28)./
TIA TSB-155-A-2010, Guidelines for the Assessment and Mitigation of Installed Category 6 Cabling to Support 10GBASE-T./
TIA TSB-5021, Guidelines for the Assessment and Mitigation of Installed Cabling to Support 2.5GBASE-T and 5GBASE-T.
|
|
9.
|
Qualification of
IEEE:
|
|
|
The IEEE was recognized under the provisions of ITU-T Recommendation A.5 on 1 November 1999. Qualifying information is on file with TSB.
|
|
10.
|
Other (for any supplementary information):
|
|
|
None.
|
|
