J.1
|
Terms, definitions and acronyms for television and sound transmission and integrated broadband cable networks
|
J.2
|
Guidelines on the use of some ITU-T Recommendations in the J series
|
J.11
|
Hypothetical reference circuits for sound-programme transmissions
Formerly ITU-R Rec. CMTT 502-2
|
J.12
|
Types of sound-programme circuits established over the international telephone network
|
J.13
|
Definitions for international sound-programme circuits
|
J.14
|
Relative levels and impedances on an international sound-programme connection
|
J.15
|
Lining-up and monitoring an international sound-programme connection
|
J.16
|
Measurement of weighted noise in sound-programme circuits
|
J.17
|
Pre-emphasis used on sound-programme circuits
|
J.18
|
Crosstalk in sound-programme circuits set up on carrier systems
|
J.19
|
A conventional test signal simulating sound-programme signals for measuring interference in other channels
Formerly ITU-R Rec. CMTT 571-2
|
J.21
|
Performance characteristics of 15 kHz-type sound-programme circuits - Circuits for high quality monophonic and stereophonic transmissions
Formerly ITU-R Rec. CMTT 505-5
|
J.22
|
[Withdrawn] Performance characteristics of 10 kHz type sound-programme circuits
Deleted after its content became technically out of date
|
J.23
|
Performance characteristics of 7 kHz type (narrow bandwidth) sound-programme circuits
Formerly ITU-R Rec. CMTT 503-4
|
J.24
|
Modulation of signals carried by sound-programme circuits by interfering signals from power supply sources
Published as ITU-R Rec. CMTT 474-1 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.25
|
Estimation of transmission performance of sound-programme circuits shorter or longer than the hypothetical reference circuit
Published as ITU-R Rec. CMTT 605-1 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.26
|
Test signals to be used on international sound-programme connections
Published as ITU-R Rec. CMTT 645-1 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.27
|
Signals for the alignment of international sound-programme connections
Published as ITU-R Rec. CMTT 661-1 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.31
|
[Withdrawn] Characteristics of equipment and lines used for setting up 15 kHz type sound-programme circuits
Deleted because no system or equipment have implemented it during the last two study periods
|
J.32
|
[Withdrawn] Characteristics of equipment and lines used for setting up 10 kHz type sound-programme circuits
Deleted after its content became technically out of date
|
J.33
|
[Withdrawn] Characteristics of equipment and lines used for setting up 6.4 kHz type sound-programme circuits
Deleted because no system or equipment have implemented it during the last two study periods
|
J.34
|
[Withdrawn] Characteristics of equipment used for setting up 7 kHz type sound-programme circuits
Deleted because no system or equipment have implemented it during the last two study periods
|
J.41
|
Characteristics of equipment for the coding of analogue high quality sound programme signals for transmission on 384 kbit/s channels
|
J.42
|
Characteristics of equipment for the coding of analogue medium quality sound-programme signals for transmission on 384-kbit/s channels
|
J.43
|
[Withdrawn] Characteristics of equipment for the coding of analogue high quality sound programme signals for transmission on 320 kbit/s channels
Deleted because no system or equipment have implemented it during the last two study periods
|
J.44
|
[Withdrawn] Characteristics of equipment for the coding of analogue medium quality sound-programme signals for transmission on 320 kbit/s channels
Deleted because no system or equipment have implemented it during the last two study periods
|
J.51
|
General principles and user requirements for the digital transmission of high quality sound programmes
Formerly ITU-R Rec. CMTT 659-1
|
J.52
|
Digital transmission of high-quality sound-programme signals using one, two or three 64 kbit/s channels per mono signal (and up to six per stereo signal)
|
J.53
|
Sampling frequencies to be used for the digital transmission of studio-quality and high-quality sound-programme signals
Published as ITU-R Rec. CMTT 606-1 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.54
|
Transmission of analogue high-quality sound-programme signals on mixed analogue-and-digital circuits using 384 kbit/s channels
Published as ITU-R Rec. CMTT 660 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.55
|
Digital transmission of high-quality sound-programme signals on distribution circuits using 480 kbit/s (496 kbit/s) per audio channel
Published as ITU-R Rec. CMTT 718 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.56
|
[Withdrawn] Transmission of high-quality sound-programme analogue signals over mixed analogue/digital circuits at 320 kbit/s
Was published as ITU-R Rec. CMTT 719 in CCIR Recommendations, Volume XII, Düsseldorf, 1990. Deleted because no system or equipment have implemented it during the last two study periods
|
J.57
|
Transmission of digital studio quality sound signals over H1 channels
Published as ITU-R Rec. CMTT 724 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.61
|
Transmission performance of television circuits designed for use in international connections
|
J.62
|
Single value of the signal-to-noise ratio for all television systems
Published as ITU-R Rec. CMTT 568 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.63
|
Insertion of test signals in the field-blanking interval of monochrome and colour television signals
Published as ITU-R Rec. CMTT 473-5 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.64
|
Definitions of parameters for simplified automatic measurement of television insertion test signals
Published as ITU-R Rec. CMTT 569-2 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.65
|
Standard test signal for conventional loading of a television channel
Published as ITU-R Rec. CMTT 570 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.66
|
Transmission of one sound programme associated with analogue television signal by means of time division multiplex in the line synchronizing pulse
Published as ITU-R Rec. CMTT 572 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.67
|
Test signals and measurement techniques for transmission circuits carrying MAC/packet signals
Formerly ITU-R Rec. CMTT 772-1
|
J.68
|
Hypothetical reference chain for television transmissions over very long distances
Published as ITU-R Rec. CMTT 603 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.73
|
[Withdrawn] Use of a 12-MHz system for the simultaneous transmission of telephony and television
Deleted because no system or equipment have implemented it during the last two study periods
|
J.74
|
[Withdrawn] Methods for measuring the transmission characteristics of translating equipments
Deleted because no system or equipment have implemented it during the last two study periods
|
J.75
|
[Withdrawn] Interconnection of systems for television transmission on coaxial pairs and on radio-relay links
Deleted because no system or equipment have implemented it during the last two study periods
|
J.77
|
[Withdrawn] Characteristics of the television signals transmitted over 18 MHz and 60-MHz systems
Deleted because no system or equipment have implemented it during the last two study periods
|
J.80
|
Transmission of component-coded digital television signals for contribution-quality applications at bit rates near 140 Mbit/s
Formerly ITU-R Rec. CMTT 721-2
|
J.81
|
Transmission of component-coded digital television signals for contribution-quality applications at the third hierarchical level of ITU-T Recommendation G.702
Formerly ITU-R Rec. CMTT.723-1
|
J.82
|
Transport of MPEG-2 constant bit rate television signals in B-ISDN
|
J.83
|
Digital multi-programme systems for television, sound and data services for cable distribution
|
J.84
|
Distribution of digital multi-programme signals for television, sound and data services through SMATV networks
|
J.85
|
Digital television transmission over long distances - General principles
Published as ITU-R Rec. CMTT 604-2 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.86
|
Mixed analogue-and-digital transmission of analogue composite television signals over long distances
Published as ITU-R Rec. CMTT 658-1 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.87
|
Use of hybrid cable television links for the secondary distribution of television into the user's premises
|
J.88
|
Transmission of enhanced definition television signals over digital links
|
J.89
|
Transport Mechanism for component-coded digital television signals using MPEG-2 4:2:2 P@ML including all service elements for contribution and primary distribution
|
J.Imp89
|
Implementers' Guide for Recommendation ITU-T J.89
|
J.90
|
Electronic programme guides for delivery by digital cable television and similar methods - Reference operating scenario and requirements
|
J.91
|
Technical methods for ensuring privacy in long-distance international television transmission
|
J.92
|
Recommended operating guidelines for point-to-point transmission of television programmes
|
J.93
|
Requirements for conditional access in the secondary distribution of digital television on cable television systems
|
J.94
|
Service information for digital broadcasting in cable television systems
|
J.95
|
Copy protection of intellectual property for content delivered on cable television systems
|
J.96
|
Technical method for ensuring privacy in long-distance international MPEG-2 television transmission conforming to ITU-T Recommendation J.89
|
J.97
|
Metadata on cable networks
|
J.98
|
Metadata requirements for video-on-demand in cable networks
|
J.100
|
Tolerances for transmission time differences between the vision and sound components of a television signal
Published as ITU-R Rec. CMTT 717 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.101
|
Measurement methods and test procedures for teletext signals
Published as ITU-R Rec. CMTT 720 in CCIR Recommendations, Volume XII, Düsseldorf, 1990
|
J.110
|
Basic principles for a worldwide common family of systems for the provision of interactive television services
|
J.111
|
Network independent protocols for interactive systems
Guidelines for the implementation of Rec. J.111 may be found in Supplement 3 to J series (1998).
|
J.112
|
Transmission systems for interactive cable television services
Example of linking options between annexes of Rec. J.112 and annexes of Rec. J.83 may be found in Supplement 1 to J series (1998). Guidelines for the implementation of annex A of Rec. J.112 may be found in Supplement 2 to J series (1998).
|
J.Imp112
|
Implementers' Guide for Recommendation ITU-T J.112 Annex B (03/01)
|
J.113
|
Digital video broadcasting interaction channel through the PSTN/ISDN
|
J.114
|
Interaction channel using digital enhanced cordless telecommunications
|
J.115
|
Interaction channel using the global system for mobile communications
|
J.116
|
Interaction channel for local multipoint distribution systems
|
J.117
|
Home digital network interface specification
|
J.118
|
Access systems for interactive services on SMATV/MATV networks
|
J.120
|
Distribution of sound and television programs over the IP network
|
J.121
|
Quality control protocol for webcasting
|
J.122
|
Second-generation transmission systems for interactive cable television services - IP cable modems
|
J.Imp122
|
Implementers' Guide for Recommendation ITU-T J.122
|
J.123
|
Multiplexing format for webcasting on the TCP/IP network
|
J.124
|
Multiplexing format for multimedia webcasting over TCP/IP networks
|
J.125
|
Link privacy for cable modem implementations
|
J.126
|
Embedded Cable Modem device specification
|
J.Imp126
|
Implementers' Guide for Recommendation ITU-T J.126 Embedded Cable Modem device specification
|
J.127
|
Transmission protocol for multimedia webcasting over TCP/IP networks
|
J.128
|
Set-top gateway specification for transmission systems for interactive cable television services
|
J.131
|
Transport of MPEG-2 signals in PDH networks
|
J.132
|
Transport of MPEG-2 signals in SDH networks
|
J.133
|
Measurement of MPEG-2 transport streams in networks
|
J.140
|
Subjective picture quality assessment for digital cable television systems
|
J.141
|
Performance indicators for data services delivered over digital cable television systems
|
J.142
|
Methods for the measurement of parameters in the transmission of digital cable television signals
|
J.143
|
User requirements for objective perceptual video quality measurements in digital cable television
|
J.144
|
Objective perceptual video quality measurement techniques for digital cable television in the presence of a full reference
|
J.145
|
Measurement and control of the quality of service for sound transmission over contribution and distribution networks
|
J.146
|
Loop latency issues in contribution circuits for conversational TV programmes
|
J.147
|
Objective picture quality measurement method by use of in-service test signals
|
J.148
|
Requirements for an objective perceptual multimedia quality model
|
J.149
|
Method for specifying accuracy and cross-calibration of Video Quality Metrics (VQM)
|
J.150
|
Operational functionalities for the delivery of digital multiprogramme television, sound and data services through multichannel, multipoint distribution systems (MMDS)
|
J.151
|
RF remodulator interface for digital television
|
J.152
|
Requirements for cable television services to use IMT-2020 radio systems
|
J.153
|
System architecture for cable television services to use IMT-2020 radio system
|
J.160
|
Architectural framework for the delivery of time-critical services over cable television networks using cable modems
|
J.161
|
Audio and video codec requirements and usage for the provision of bidirectional audio services over cable television networks using cable modems
|
J.162
|
Network call signalling protocol for the delivery of time-critical services over cable television networks using cable modems
|
J.163
|
Dynamic quality of service for the provision of real-time services over cable television networks using cable modems
|
J.164
|
Event message requirements for the support of real-time services over cable television networks using cable modems
|
J.165
|
[Withdrawn] IPCablecom Internet signalling transport protocol (ISTP)
This Recommendation was deleted on 2008-02-08 since it was not widely implemented and was no longer required by cable operators
|
J.166
|
IPCablecom Management Information Base (MIB) framework
|
J.167
|
Media terminal adapter (MTA) device provisioning requirements for the delivery of real-time services over cable television networks using cable modems
|
J.168
|
[Withdrawn] IPCablecom Media Terminal Adapter (MTA) MIB requirements
|
J.169
|
[Withdrawn] IPCablecom network call signalling (NCS) MIB requirements
|
J.170
|
IPCablecom security specification
|
J.171
|
[Withdrawn] IPCablecom Trunking Gateway Control Protocol (TGCP)
ITU-T Rec. J.171 (2002) was reorganized into J.171.0, .1 and .2 when revised in 2005
|
J.171.0
|
IPCablecom trunking gateway control protocol (TGCP): Profiles overview
ITU-T Rec. J.171 (2002) was reorganized into J.171.0, .1 and .2 when revised in 2005
|
J.171.1
|
IPCablecom trunking gateway control protocol (TGCP): Profile 1
ITU-T Rec. J.171 (2002) was reorganized into J.171.0, .1 and .2 when revised in 2005
|
J.171.2
|
IPCablecom trunking gateway control protocol (TGCP): Profile 2
ITU-T Rec. J.171 (2002) was reorganized into J.171.0, .1 and .2 when revised in 2005
|
J.172
|
IPCablecom management event mechanism
|
J.173
|
IPCablecom embedded MTA primary line support
|
J.174
|
[Withdrawn] IPCablecom interdomain quality of service
|
J.175
|
Audio server protocol
|
J.176
|
[Withdrawn] IPCablecom management event mechanism MIB
|
J.177
|
IPCablecom CMS subscriber provisioning specification
|
J.178
|
IPCablecom CMS to CMS signalling
|
J.179
|
IPCablecom support for multimedia
|
J.180
|
User requirements for statistical multiplexing of several programmes on a transmission channel
|
J.181
|
Digital program insertion cueing message for cable television systems
|
J.182
|
Parameter sets for analogue interface specifications for the interconnection of set-top boxes and presentation devices in the home
|
J.183
|
Time-division multiplexing of multiple MPEG-2 transport streams and generic formats of transport streams over cable television systems
|
J.184
|
Digital broadband delivery system: Out-of-band transport
|
J.185
|
Transmission equipment for transferring multi-channel television signals over optical access networks by frequency modulation conversion
|
J.186
|
Transmission equipment for multi-channel television signals over optical access networks by sub-carrier multiplexing (SCM)
|
J.187
|
Transport mechanism for component-coded digital high-definition television signals using MPEG-2 video coding including all service elements for contribution and primary distribution
|
J.188
|
A framework for an efficient parallel video transmission system including codecs with functions of failure detection and picture quality evaluation
|
J.189
|
Seamless splicing for MPEG-2 bit streams
|
J.190
|
Architecture of MediaHomeNet
|
J.191
|
IP feature package to enhance cable modems
|
J.Imp191
|
Implementers' Guide for Recommendation ITU-T J.191 IP feature package to enhance cable modems
|
J.192
|
A residential gateway to support the delivery of cable data services
|
J.193
|
Requirements for the next generation of set-top-boxes
|
J.195.1
|
Functional requirements for first-generation HiNOC
|
J.195.2
|
Physical layer specification for first-generation HiNoC
|
J.195.3
|
MAC layer specification for first-generation HiNoC
|
J.196.1
|
Functional requirements for second-generation HiNoC
|
J.196.2
|
Physical layer specification for second-generation HiNoC
|
J.196.3
|
MAC layer specification for second-generation HiNoC
|
J.197
|
High level requirements for a Digital Rights Management (DRM) bridge from a cable access network to a home network
|
J.198.1
|
Functional requirements for third-generation HiNoC
|
J.198.2
|
Physical layer specification for third-generation HiNoC
|
J.198.3
|
MAC layer specification for third-generation HiNoC
|
J.199
|
Battery backup for cable-based devices
|
J.200
|
Worldwide common core - Application environment for digital interactive television services
|
J.201
|
Harmonization of declarative content format for interactive television applications
|
J.202
|
Harmonization of procedural content formats for interactive TV applications
|
J.203
|
Common core for digital video recorder platform
|
J.204
|
Metrics gathering specification
|
J.205
|
Requirements for an application control framework using integrated broadcast and broadband digital television
|
J.206
|
Architecture for an application control framework using integrated broadcast and broadband digital television
|
J.207
|
Specification for an integrated broadcast and broadband digital television application control framework
|
J.208
|
Harmonization of integrated broadcast-broadband ditial television application control framework
|
J.210
|
Downstream RF interface for cable modem termination systems
|
J.211
|
Timing interface for cable modem termination systems
|
J.212
|
Downstream external Physical layer interface for modular cable modem termination systems
|
J.213
|
Layer 2 virtual private networks for IP cable modem systems
|
J.214
|
Cable modem TDM emulation interface
|
J.215
|
Client digital program insertion API
|
J.216
|
Second-generation modular headend architecture in systems for interactive cable television services - IP cable modems
|
J.218
|
Cable modem IPv4 and IPv6 eRouter specification
|
J.222.0
|
Third-generation transmission systems for interactive cable television services - IP cable modems: Overview
|
J.222.1
|
Third-generation transmission systems for interactive cable television services - IP cable modems: Physical layer specification
|
J.222.2
|
Third-generation transmission systems for interactive cable television services - IP cable modems: MAC and Upper Layer protocols
|
J.222.3
|
Third-generation transmission systems for interactive cable television services - IP cable modems: Security services
|
J.223.1
|
Functional requirements for Cabinet DOCSIS (C-DOCSIS)
|
J.223.2
|
Cabinet DOCSIS (C-DOCSIS) system specification
|
J.224
|
Fifth-generation transmission systems for interactive cable television services - IP cable modems
|
J.225
|
Fourth-generation transmission systems for interactive cable television services - IP cable modems
|
J.230
|
Requirements for platform functionalities on the integration of cable STB and companion devices including mobile second screen devices
|
J.240
|
Framework for remote monitoring of transmitted picture signal-to-noise ratio using spread-spectrum and orthogonal transform
|
J.241
|
Quality of service ranking and measurement methods for digital video services delivered over broadband IP networks
|
J.242
|
A method to reconstruct the received video sequence seen at the receiver using transmission error information to monitor the perceptual video quality at the receiver in digital cable television and video telephony
|
J.243
|
Requirements for operational monitoring in television programme transmission chains
|
J.244
|
Full reference and reduced reference calibration methods for video transmission systems with constant misalignment of spatial and temporal domains with constant gain and offset
|
J.245
|
Subjective assessment method of picture quality assessed in the home
|
J.246
|
Perceptual visual quality measurement techniques for multimedia services over digital cable television networks in the presence of a reduced bandwidth reference
|
J.247
|
Objective perceptual multimedia video quality measurement in the presence of a full reference
|
J.248
|
Requirements for operational monitoring of video-to-audio delay in the distribution of television programs
|
J.249
|
Perceptual video quality measurement techniques for digital cable television in the presence of a reduced reference
|
J.260
|
Requirements for preferential telecommunications over IPCablecom networks
|
J.261
|
Framework for implementing preferential telecommunications in IPCablecom and IPCablecom2 networks
|
J.262
|
Specifications for authentication in preferential telecommunications over IPCablecom2 networks
|
J.263
|
Specification for priority in preferential telecommunications over IPCablecom2 networks
|
J.280
|
Digital program insertion: Splicing application program interface
|
J.281
|
Requirements for multichannel video signal transmission over IP-based fibre network
|
J.282
|
Architecture of multi-channel video signal distribution over IP-based networks
|
J.283
|
IP network architecture with network layer route diversity providing resilient IP multicast video distribution
|
J.284
|
Requirements and framework for gathering electronic content over IP-based network
|
J.285
|
Architecture for synchronised programme transfer with pull operation over IP-based networks
|
J.286
|
Seamless splicing for heterogeneous ITU-T H.262 | ISO/IEC 13818-2 (MPEG-2 video) and ITU-T H.264 | ISO/IEC 14496-10 bitstreams
|
J.287
|
Automation system to compression system communications application program interface
|
J.288
|
Encapsulation of type length value (TLV) packet for cable transmission systems
|
J.290
|
Next generation set-top box core architecture
|
J.291
|
Next generation set-top-box cable architecture
|
J.292
|
Next generation set-top box media-independent architecture
|
J.293
|
Component definition and interface specification for the next generation set-top box
|
J.294
|
Residential gateway requirements for the support of broadcast and IP-based interactive services over cable television networks
|
J.295
|
Functional requirements for a hybrid cable set-top box
|
J.296
|
Specifications for a hybrid cable set-top box
|
J.297
|
Requirements and functional specification of cable set-top box for 4K ultra high definition television
|
J.298
|
Requirements and technical specifications of a cable TV hybrid set-top box compatible with terrestrial and satellite TV transport
|
J.299
|
Functional requirements for remote management of cable set-top boxes by auto configuration server
|
J.301
|
Requirements for augmented reality smart television systems
|
J.302
|
System specifications of augmented reality smart television service
|
J.340
|
Reference algorithm for computing peak signal to noise ratio of a processed video sequence with compensation for constant spatial shifts, constant temporal shift, and constant luminance gain and offset
|
J.341
|
Objective perceptual multimedia video quality measurement of HDTV for digital cable television in the presence of a full reference
|
J.342
|
Objective multimedia video quality measurement of HDTV for digital cable television in the presence of a reduced reference signal
|
J.343
|
Hybrid perceptual bitstream models for objective video quality measurements
|
J.343.1
|
Hybrid-NRe objective perceptual video quality measurement for HDTV and multimedia IP-based video services in the presence of encrypted bitstream data
|
J.343.2
|
Hybrid-NR objective perceptual video quality measurement for HDTV and multimedia IP-based video services in the presence of non-encrypted bitstream data
|
J.343.3
|
Hybrid-RRe objective perceptual video quality measurement for HDTV and multimedia IP-based video services in the presence of a reduced reference signal and encrypted bitstream data
|
J.343.4
|
Hybrid-RR objective perceptual video quality measurement for HDTV and multimedia IP-based video services in the presence of a reduced reference signal and non-encrypted bitstream data
|
J.343.5
|
Hybrid-FRe objective perceptual video quality measurement for HDTV and multimedia IP-based video services in the presence of a full reference signal and encrypted bitstream data
|
J.343.6
|
Hybrid-FR objective perceptual video quality measurement for HDTV and multimedia IP-based video services in the presence of a full reference signal and non-encrypted bitstream data
|
J.360
|
IPCablecom2 architecture framework
|
J.361
|
IPCablecom2 codec and media
|
J.362
|
IPCablecom2 control point discovery
|
J.363
|
IPCablecom2 data collection to support accounting
|
J.365
|
IPCablecom2 application manager interface
|
J.366.0
|
IPCablecom2 IP Multimedia Subsystem (IMS): Delta Recommendations overview
|
J.366.1
|
Organization of subscriber data specification
|
J.366.2
|
IPCablecom2 IP Multimedia Subsystem (IMS): Session handling - IM call model - Stage 2 specification
|
J.366.3
|
IPCablecom2 IP Multimedia Subsystem (IMS): Stage 2 specification
|
J.366.4
|
IPCablecom2 IP Multimedia Subsystem (IMS): Session Initiation Protocol (SIP) and Session Description Protocol (SDP) - Stage 3 specification
|
J.366.5
|
IP multimedia subsystem Cx and Dx interfaces; Signalling flows and message contents specification
|
J.366.6
|
Specification of the Cx and Dx interfaces based on the Diameter protocol
|
J.366.7
|
IPCablecom2 IP Multimedia Subsystem (IMS): Access security for IP-based services
|
J.366.8
|
IPCablecom2 IP Multimedia Subsystem (IMS): Network domain security specification
|
J.366.9
|
IPCablecom2 IP Multimedia Subsystem (IMS): Generic authentication architecture specification (3GPP TS 33.220)
|
J.366.10
|
Zh and Zn interfaces based on the Diameter protocol; Stage 3 specification
|
J.367
|
IPCablecom2 presence specification
|
J.368
|
IPCablecom2 quality of service specification
|
J.369
|
IPCablecom2 E-UE provisioning framework specification
|
J.370
|
IPCablecom2 embedded user equipment provisioning data model specification
|
J.380.1
|
Digital program insertion - Advertising systems interfaces - Advertising systems overview
|
J.380.2
|
Digital program insertion - Advertising systems interfaces - Core data elements
|
J.380.3
|
Digital program insertion - Advertising systems interfaces - Management interface
|
J.380.4
|
Digital program insertion - Advertising systems interfaces - Content information service
|
J.380.5
|
Digital program insertion - Advertising systems interfaces - Placement opportunity information service
|
J.380.6
|
Digital program insertion - Advertising systems interfaces - Subscriber information service
|
J.380.7
|
Digital program insertion - Advertising systems interfaces - Message transport
|
J.380.8
|
Digital program insertion - Advertising systems interfaces - General information service
|
J.381
|
Requirements for advanced digital cable transmission technologies
|
J.382
|
Advanced digital downstream transmission systems for television, sound and data services for cable distribution
|
J.383
|
Conversion of type length value packet and transport stream for advanced cable transmission systems
|
J.388
|
Real-time video and audio transmission system over IP networks
|
J.460.0
|
IPCablecom2 residential SIP telephony: Feature definition
|
J.460.1
|
IPCablecom2 residential SIP telephony: Feature specification
|
J.460.2
|
IPCablecom2 residential SIP telephony: embedded digital voice adapter (E-DVA) specification
|
J.460.3
|
IPCablecom2 residential SIP telephony: Usage data recording
|
J.460.4
|
IPCablecom2 residential SIP telephony: Embedded-user equipment provisioning specification
|
J.481
|
Cable network requirements for RF and IP secondary distribution of television programmes
|
J.482
|
Requirements of a radio frequency (RF)/Internet protocol (IP) video switching system
|
J.483
|
Architecture and functional specifications of a radio frequency (RF)/Internet protocol (IP) video switching system
|
J.484
|
Requirements of multicast adaptive bitrate (M-ABR) IP delivery
|
J.600
|
Transport of Large Screen Digital Imagery (LSDI) applications that employ MPEG-2 encoded HDTV signals
|
J.601
|
Transport of Large Screen Digital Imagery (LSDI) applications for its expanded hierarchy
|
J.602
|
Network service operator's requirements for real-time transmission of exLSDI signals under parallel processing functionality
|
J.603
|
Real-time transmission system of exLSDI signals under spatial image segmentation for parallel processing
|
J.604
|
Requirements for a scalable video transmission system over cable networks
|
J.700
|
IPTV service requirements and framework for secondary distribution
|
J.701
|
Broadcast-centric IPTV terminal middleware
|
J.702
|
Enablement of current terminal devices for the support of IPTV services
|
J.703
|
IPTV client control interface definition
|
J.704
|
Functional requirements of the service provider interface for television primary and secondary distribution and associated interactive services
|
J.705
|
IPTV client provisioning, activation, configuration and management interface definition
|
J.706
|
Overview of the distribution of target-specific content
|
J.707
|
Messages and protocols enabling the distribution of target-specific content within integrated broadband cable networks
|
J.800.0
|
Cable assigned names and numbers
|
J.800.1
|
Cable DHCP Registry
|
J.800.2
|
Cable definition MIB specification
|
J.900
|
Requirements for stereoscopic three-dimensional television service over hybrid fibre and coaxial based networks
|
J.901
|
Requirements for the free viewpoint television (FTV) video transmission system
|
J.902
|
Multilayered data structure for scalable view-range representation
|
J.1001
|
Requirements for renewable conditional access system
|
J.1002
|
Pairing protocol specification for renewable conditional access system
|
J.1003
|
Specifications of network protocol for renewable conditional access system
|
J.1004
|
Specifications of authorization centre interfaces for renewable conditional access system
|
J.1005
|
Architecture and requirements of digital rights management (DRM) for cable television multiscreen
|
J.1006
|
Specification of IP-VoD DRM for cable television multiscreen system in multi-DRM environment
|
J.1010
|
Embedded common interface for exchangeable CA/DRM solutions; Use cases and requirements
|
J.1011
|
Embedded common interface for exchangeable CA/DRM solutions; Architecture, definitions and overview
|
J.1012
|
Embedded common interface for exchangeable CA/DRM solutions; CA/DRM container, loader, interfaces, revocation
|
J.1013
|
Embedded common interface for exchangeable CA/DRM solutions; The virtual machine
|
J.1014
|
Embedded common interface for exchangeable CA/DRM solutions; Advanced security - ECI-specific functionalities
|
J.1015
|
Embedded common interface for exchangeable CA/DRM solutions; The advanced security system - Key ladder block
|
J.1015.1
|
Embedded common interface for exchangeable CA/DRM solutions; The advanced security system - Key ladder block: Authentication of control word-usage rules information and associated data 1
|
J.1020
|
Service model and architecture of downloadable mobile multi-CA/DRM solutions for delivering CA/DRM client software to secondary devices
|
J.1026
|
Downloadable conditional access system for unidirectional networks - Requirements
|
J.1027
|
Downloadable conditional access system for unidirectional networks - System architecture
|
J.1028
|
Downloadable conditional access system for unidirectional networks - Terminal system
|
J.1031
|
Downloadable conditional access system for bidirectional networks - Requirements
|
J.1032
|
Downloadable conditional access system for bidirectional networks - System architecture
|
J.1033
|
Downloadable conditional access system for bidirectional networks - The terminal
|
J.1036
|
Factual subscriber-base reporting and protected content delivery in conditional access system - Requirements
|
J.1040
|
Digital rights management for video and audio content distribution - Requirements
|
J.1101
|
Functional requirements for IP-based switched digital video using data over cable service interface specifications
|
J.1102
|
Interface specifications for IP-based switched digital video using DOCSIS
|
J.1103
|
Transmission specification for IP-based switched digital video using data over cable service interface specifications
|
J.1104
|
Control specification for IP-based switched digital video using data over cable service interface specifications
|
J.1105
|
Requirement of channel switching service over hybrid fibre and coaxial based network
|
J.1106
|
Requirement for radio over IP transmission system
|
J.1107
|
Architecture and specification for radio over IP transmission systems
|
J.1108
|
Transmission specification for radio over IP transmission systems
|
J.1109
|
Requirement for in-band full-duplex in a HFC based network
|
J.1110
|
Functional requirements specification for self-interference cancellation function of in-band full-duplex in a HFC based network
|
J.1111
|
Requirements for the advanced IP-based digital video convergence service
|
J.1112
|
Functional requirements for IP-based digital video convergence service
|
J.1201
|
Smart television operating system - Functional requirements
|
J.1202
|
Smart television operating system - Architecture
|
J.1203
|
Smart television operating system - Specification
|
J.1204
|
Smart television operating system - Security framework
|
J.1205
|
Smart television operating system - Hardware abstract layer application programming interface
|
J.1206
|
Smart television operating system - Application programming interface
|
J.1207
|
Smart television operating system - Conformance test
|
J.1210
|
Requirements of IP video broadcast (IPVB) for cable TV networks
|
J.1211
|
Specifications of IP video broadcast (IPVB) for cable TV networks
|
J.1291
|
Requirements and functional specifications of audio and video interfaces of cable set-top boxes
|
J.1292
|
Functional requirements for cable set-top box supporting Ultra-High-Definition video and virtual reality services
|
J.1301
|
Specification of cloud-based converged media service to support Internet protocol and broadcast cable television - Requirements
|
J.1302
|
Specification of a cloud-based converged media service to support Internet protocol and broadcast cable television - System architecture
|
J.1303
|
Specification of a cloud-based converged media service to support Internet protocol and broadcast cable television - System specification on collaboration between production media cloud and cable service cloud
|
J.1304
|
Functional requirements for service collaboration between cable television operators and OTT service providers
|
J.1305
|
Requirements for microservices architecture for audiovisual media in the converged media cloud
|
J.1306
|
Specification of microservices architecture for audio-visual media in the converged media cloud
|
J.1311
|
Technical tequirements for cloud gaming service platforms
|
J.1318
|
Requirements of E2E Network Platform for Cloud-based Object Wave Transmissions
|
J.1401
|
Television content distribution platforms - Requirements for open access and signal quality
|
J.1600
|
Premium cable network platform - Framework
|
J.1611
|
Functional requirements for a smart home gateway
|
J.1612
|
Architecture for a smart home gateway
|
J.1630
|
End-to-end network characteristics requirement for video services over integrated broadband cable network
|
J.1631
|
Functional requirements of E2E network platforms to enhance the delivery of cloud-VR services over integrated broadband cable networks
|
J.Sup1
|
Example of linking options between annexes of ITU-T Recommendation J.112 and annexes of ITU-T Recommendation J.83
|
J.Sup2
|
Guidelines for the implementation of annex A of Recommendation J.112, "Transmission systems for interactive cable television services" - Example of digital video broadcasting (DVB) interaction channel for cable television distribution
|
J.Sup3
|
Guidelines for the implementation of Recommendation J.111 "Network independent protocols" - Example of digital video broadcasting (DVB) systems for interactive services
|
J.Sup4
|
[Withdrawn] Terminology for new services in television and sound-program transmission
|
J.Sup5
|
Guidelines on the use of some ITU-T Recommendations in the J series
|
J.Sup6
|
Ultra high definition television cable transmission with functions defined in Recommendations ITU-T J.183, ITU-T J.288 and ITU-T J.94
|
J.Sup7
|
Embedded common interface (ECI) for exchangeable CA/DRM solutions; Guidelines for the implementation of ECI
|
J.Sup8
|
Embedded common interface (ECI) for exchangeable CA/DRM solutions; Trust environment
|
J.Sup9
|
Embedded common interface for exchangeable CA/DRM solutions; System validation
|
J.Sup10
|
Correspondence between CableLabs DOCSIS Specifications and ITU-T J-series Recommendations
|
J.Sup11
|
Guidelines for installing a digital television service for cable networks based on ITU-T Recommendations
|
J.Sup12
|
Comparison between third-generation HiNoC and second-generation HiNoC
|
J.Sup13
|
ITU-T J.1036 - Factual subscriber-base reporting and protected content delivery in conditional access system - Test methods
|
