Switching and signalling, and associated measurements and tests

Français Español

Home : ITU-T : Publications : Recommendations : Q Series

Recently posted - Search Recommendations

Switching and signalling, and associated measurements and tests

RSS Feed

Q.1	Signal receivers for manual working
Q.2	Signal receivers for automatic and semi-automatic working, used for manual working
Q.4	Automatic switching functions for use in national networks
Q.5	Advantages of semi-automatic service in the international telephone service
Q.6	Advantages of international automatic working
Q.7	Signalling systems to be used for international automatic and semi-automatic telephone working
Q.8	Signalling systems to be used for international manual and automatic working on analogue leased circuits
Q.9	Vocabulary of switching and signalling terms
Q.10	[Withdrawn] Definitions relating to national and international numbering plans Deleted Q.10 was an extract of ITU-T E.160. E.160 was later replaced by ITU-T E.164
Q.11bis	[Withdrawn] Numbering plan for the ISDN era Q.11 bis was an alias name of ITU-T E.164. Only this alias name was suppressed. ITU-T E.164 remains valid
Q.11ter	[Withdrawn] Timetable for coordinated implementation of the full capability of the numbering plan for the ISDN era (Recommendation E.164) Q.11 ter was an alias name of ITU-T E.165. Only this alias name was suppressed. ITU-T E.165 remains valid
Q.12	Overflow - alternative routing - rerouting - automatic repeat attempt
Q.13	[Withdrawn] International telephone routing plan Q.13 was an alias name of ITU-T E.171. Only this alias name was suppressed. ITU-T E.171 remains valid
Q.14	Means to control the number of satellite links in an international telephone connection
Q.15	[Withdrawn] Nominal mean power during the busy hour Deleted Q.15 was an extract of ITU-T G.223. ITU-T G.223 remains valid
Q.16	[Withdrawn] Maximum permissible value for the absolute power level of a signalling pulse Q.16 was an alias name of ITU-T G.224. Only this alias name was suppressed. ITU-T G.224 remains valid
Q.20	Comparative advantages of "in-band" and "out-band" systems
Q.21	Systems recommended for out-band signalling
Q.22	Frequencies to be used for in-band signalling
Q.23	Technical features of push-button telephone sets
Q.24	Multifrequency push-button signal reception
Q.25	Splitting arrangements and signal recognition times in "in-band" signalling systems
Q.26	Direct access to the international network from the national network
Q.27	Transmission of the answer signal
Q.28	Determination of the moment of the called subscriber's answer in the automatic service
Q.29	Causes of noise and ways of reducing noise in telephone exchanges
Q.30	Improving the reliability of contacts in speech circuits
Q.31	Noise in a national 4-wire automatic exchange
Q.32	Reduction of the risk of instability by switching means
Q.33	Protection against the effects of faulty transmission on groups of circuits
Q.35	Technical characteristics of tones for the telephone service This Recommendation is published with the double number E.180 and Q.35. For more details see E.180.
Q.36	[Withdrawn] Customer recognition of foreign tones Q.36 was an alias name of ITU-T E.181. Only this alias name was suppressed. ITU-T E.181 remains valid
Q.40	[Withdrawn] The transmission plan Deleted Q.40 was an extract of ITU-T G.101. ITU-T G.101 remains valid
Q.41	[Withdrawn] Mean one-way propagation time Deleted Q.41 was an extract of ITU-T G.114. ITU-T G.114 remains valid
Q.42	[Withdrawn] Stability and echo (echo suppressors) Q.42 was an alias name of ITU-T G.131. Only this alias name was suppressed. ITU-T G.131 remains valid
Q.43	[Withdrawn] Transmission losses, relative levels Deleted Q.43 was an extract of ITU-T G.101. ITU-T G.101 remains valid
Q.44	Attenuation distortion
Q.45	Transmission characteristics of an analogue international exchange
Q.45bis	Transmission characteristics of an analogue international exchange
Q.48	Demand assignment signalling systems
Q.49	[Withdrawn] CCITT automatic transmission measuring and signalling testing equipment ATME No. 2 Q.49 was an alias name of ITU-T O.22. Only this alias name was suppressed. ITU-T O.22 remains valid
Q.50	Signalling between Circuit Multiplication Equipment (CME) and International Switching Centres (ISC)
Q.50.1	Signalling between International Switching Centres (ISC) and Digital Circuit Multiplication Equipment (DCME) including the control of compression/decompression
Q.50.2	Signalling between International Switching Centres (ISC) and Digital Circuit Multiplication Equipment (DCME) including the control of compression/decompression over an IP network
Q.52	Signaling between international switching centers and stand-alone echo control devices
Q.55	Signalling between signal processing network equipments (SPNE) and international switching centres (ISC)
Q.56	Signalling between signal processing network equipment (SPNE) and international switching centres (ISC) over an IP network
Q.65	The unified functional methodology for the characterization of services and network capabilities including alternative object oriented techniques
Q.68	Overview of methodology for developing management services
Q.71	ISDN circuit mode switched bearer services
Q.72	Stage 2 description for packet mode services
Q.76	Service procedures for Universal Personal Telecommunication - Functional modelling and information flows
Q.80	Introduction to stage 2 service descriptions for supplementary services
Q.81.1	Stage 2 description for number identification supplementary services : Direct dialling-in
Q.81.2	Stage 2 description for number identification supplementary services : Multiple subscriber number Published with ITU-T Q.81.8.
Q.81.3	Stage 2 description for number identification supplementary services : Calling line identification presentation (CLIP) and calling line identification restriction (CLIR) Published with ITU-T Q.81.5.
Q.81.4	[Withdrawn] Stage 2 description for number identification supplementary services : Calling line identification restriction (CLIR)
Q.81.5	Stage 2 description for number identification supplementary services : Connected line identification, presentation and restriction (COLP) and (COLR) Published with ITU-T Q.81.3.
Q.81.6	[Withdrawn] Stage 2 description for number identification supplementary services : Connected line identification restriction (COLR)
Q.81.7	Stage 2 description for number identification supplementary services : Malicious call identification (MCID) This subject was only recognised and is for further study
Q.81.8	Stage 2 description for number identification supplementary services : Sub-addressing (SUB) Published with ITU-T Q.81.2.
Q.82.1	Stage 2 description for call offering supplementary services : Call transfer Empty Recommendation. This subject was only recognised and is for further study.
Q.82.2	Stage 2 description for call offering supplementary services : Call forwarding Published with ITU-T Q.82.3.
Q.82.3	Stage 2 description for call offering supplementary services : Call deflection Published with ITU-T Q.82.2.
Q.82.4	Stage 2 description for call offering supplementary services : Line hunting
Q.82.7	Stage 2 description for call offering supplementary services : Explicit call transfer
Q.83.2	Stage 2 description for call completion supplementary services : Call hold
Q.83.3	Stage 2 description for call completion supplementary services : Completion of call to busy subscriber Empty Recommendation. This service has only been identified and requires further study.
Q.83.4	Stage 2 description for call completion supplementary services : Terminal portability Published with ITU-T Q.83.1.
Q.83.1	Stage 2 description for call completion supplementary services : Call waiting (CW) Published with ITU-T Q.83.4.
Q.84.1	Stage 2 description for multiparty supplementary services : Conference calling (CONF)
Q.84.2	Stage 2 description for multiparty supplementary services : Three-party service
Q.85.1	Stage 2 description for community of interest supplementary services : Closed user group Published with ITU-T Q.85.3.
Q.85.3	Stage 2 description for community of interest supplementary services : Multi-level precedence and preemption (MLPP) Published with ITU-T Q.85.1.
Q.85.6	Stage 2 description for community of interest supplementary services : Global Virtual Network Service (GVNS)
Q.86.1	Stage 2 description for charging supplementary services : Credit card call Empty Recommendation. This service has only been identified and requires further study.
Q.86.2	Stage 2 description for charging supplementary services : Advice of charge (AOC)
Q.86.3	Stage 2 description for charging supplementary services : Reverse charging (REV)
Q.86.4	Stage 2 description for charging supplementary services : International Freephone Service (IFS)
Q.86.7	Stage 2 description for charging supplementary services : International Telecommunication Charge Card (ITCC)
Q.87.1	Stage 2 description for additional information transfer supplementary services : User-to-user signalling (UUS)
Q.87.2	Stage 2 description for additional information transfer supplementary services : User signalling bearer services Empty Recommendation. This service has only been identified and requires further study.
Q.101	Facilities provided in international semi-automatic working
Q.102	Facilities provided in international automatic working
Q.103	Numbering used
Q.104	Language digit or discriminating digit
Q.105	National (significant) number
Q.106	The sending-finished signal
Q.107	Standard sending sequence of forward address information
Q.107bis	Analysis of forward address information for routing
Q.108	One-way or both-way operation of international circuits
Q.109	Transmission of the answer signal in international exchanges
Q.110	General aspects of the utilization of standardized CCITT signalling systems on PCM links
Q.112	Signal levels and signal receiver sensitivity
Q.113	Connection of signal receivers in the circuit
Q.114	Typical transmission requirements for signal senders and receivers
Q.115	Logic for the control of echo control devices Renumbered as Q.115.1 when revised in 2002
Q.115.0	Protocols for the control of signal processing network elements and functions
Q.115.1	Logic for the control of echo control devices and functions Formerly Rec. Q.115
Q.115.2	Logic for the control of voice enhancement devices and functions
Q.116	Indication given to the outgoing operator or calling subscriber in case of an abnormal condition
Q.117	Alarms for technical staff and arrangements in case of faults
Q.118	Abnormal conditions - Special release arrangements
Q.118bis	Indication of congestion conditions at transit exchanges
Q.120-Q.139	Specifications of signalling system No. 4
Q.140-Q.180	Specifications of Signalling System No. 5
Q.251-Q.300	Specifications of Signalling System No. 6
Q.310-Q.332	Specifications of Signalling System R1
Q.400-Q.490	Specifications of Signalling System R2
Q.500	Digital local, combined, transit and international exchanges - Introduction and field of application
Q.511	Exchange interfaces towards other exchanges
Q.512	Digital exchange interfaces for subscriber access
Q.513	Digital exchange interfaces for operations, administration and maintenance
Q.521	Digital exchange functions
Q.522	Digital exchange connections, signalling and ancillary functions
Q.541	Digital exchange design objectives - General
Q.542	Digital exchange design objectives - Operations and maintenance
Q.543	Digital exchange performance design objectives
Q.544	Digital exchange measurements
Q.551	Transmission characteristics of digital exchanges
Q.552	Transmission characteristics at 2-wire analogue interfaces of digital exchanges
Q.553	Transmission characteristics at 4-wire analogue interfaces of digital exchanges
Q.554	Transmission characteristics at digital interfaces of digital exchanges
Q.601-Q.695	Lists and meanings of FITEs, BITEs and SPITEs - Representation of information contents of signals of the signalling systems
Q.602	Interworking of signalling systems - Introduction
Q.603	Events
Q.604	Interworking of signalling systems - Information analysis tables
Q.605	Drawing conventions
Q.606	Logic procedures
Q.607	Interworking requirements for new signalling systems
Q.608	Miscellaneous interworking aspects
Q.611	Logic procedures for incoming signalling system No. 4
Q.612	Logic procedures for incoming signalling system No. 5
Q.613	Logic procedures for incoming signalling system No. 6
Q.614	Logic procedures for incoming Signalling System No. 7 (TUP)
Q.615	Logic procedures for incoming signalling system R1
Q.616	Logic procedures for incoming signalling system R2
Q.617	Logic procedures for incoming signalling system No. 7 (ISUP)
Q.621	Logic procedures for outgoing signalling system No. 4
Q.622	Logic procedures for outgoing signalling system No. 5
Q.623	Logic procedures for outgoing signalling system No. 6
Q.624	Logic procedures for outgoing Signalling System No. 7 (TUP)
Q.625	Logic procedures for outgoing signalling system R1
Q.626	Logic procedures for outgoing signalling system R2
Q.627	Logic procedures for outgoing Signalling System No. 7 (ISUP)
Q.634	Logic procedures for interworking of signalling system No. 4 to R2
Q.642	Logic procedures for interworking of signalling system No. 5 to No. 6
Q.643	Logic procedures for interworking of signalling system No. 5 to No. 7 (TUP)
Q.644	Logic procedures for interworking of signalling system No. 5 to R1
Q.645	Logic procedures for interworking of signalling system No. 5 to R2
Q.646	Logic procedures for interworking of Signalling System No. 5 to Signalling System No. 7 (ISUP)
Q.652	Logic procedures for interworking of signalling system No. 6 to No. 5
Q.653	Logic procedures for interworking of signalling system No. 6 to No. 7 (TUP)
Q.654	Logic procedures for interworking of signalling system No. 6 to R1
Q.655	Logic procedures for interworking of signalling system No. 6 to R2
Q.656	Logic procedures for interworking of Signalling System No. 6 to Signalling System No. 7 (ISUP)
Q.662	Logic procedures for interworking of signalling system No. 7 (TUP) to No. 5
Q.663	Logic procedures for interworking of signalling system No. 7 (TUP) to No. 6
Q.664	Logic procedures for interworking of signalling system No. 7 (TUP) to No. 7 (TUP)
Q.665	Logic procedures for interworking of signalling system No. 7 (TUP) to R1
Q.666	Logic procedures for interworking of signalling system No. 7 (TUP) to R2
Q.667	Logic procedures for interworking of Signalling System No. 7 (TUP) to Signalling System No. 7 (ISUP)
Q.671	Logic procedures for interworking of signalling system R1 to No. 5
Q.672	Logic procedures for interworking of signalling system R1 to No. 6
Q.673	Logic procedures for interworking of signalling system R1 to No. 7 (TUP)
Q.674	Logic procedures for interworking of signalling system R1 to R2
Q.675	Logic procedures for interworking of Signalling System R1 to Signalling System No. 7 (ISUP)
Q.681	Logic procedures for interworking of signalling system R2 to No. 4
Q.682	Logic procedures for interworking of signalling system R2 to No. 5
Q.683	Logic procedures for interworking of signalling system R2 to No. 6
Q.684	Logic procedures for interworking of signalling system R2 to No. 7 (TUP)
Q.685	Logic procedures for interworking of signalling system R2 to R1
Q.686	Logic procedures for interworking of Signalling System R2 to Signalling System No. 7 (ISUP)
Q.690	Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 5
Q.691	Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 6
Q.692	Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 7 (TUP)
Q.694	Logic procedures for interworking of signalling system No. 7 (ISUP) to R1
Q.695	Logic procedures for interworking of Signalling System No. 7 (ISUP) to R2
Q.696	Interworking between the Signalling System No. 7 ISDN User Part (ISUP) and Signalling Systems No. 5, R2 and Signalling System No. 7 TUP
Q.698	Interworking of Signalling System No. 7 ISUP, TUP and Signalling System No. 6 using arrow diagrams
Q.699	Interworking between ISDN access and non-ISDN access over ISDN User Part of Signalling System No. 7
Q.699.1	Interworking between ISDN access and non-ISDN access over ISDN user part of signalling system No. 7: Support of VPN applications with PSS1 information flows
Q.700	Introduction to CCITT Signalling System No. 7
Q.701	Functional description of the message transfer part (MTP) of Signalling System No. 7
Q.702	Signalling data link
Q.703	Signalling link
Q.704	Signalling network functions and messages Covering note, 17.09.99: Erratum (english only)
Q.705	Signalling network structure
Q.706	Message transfer part signalling performance
Q.707	Testing and maintenance
Q.708	Assignment procedures for international signalling point codes
Q.709	Hypothetical signalling reference connection
Q.710	Simplified MTP version for small systems
Q.711	Functional description of the signalling connection control part
Q.712	Definition and function of Signalling connection control part messages
Q.713	Signalling connection control part formats and codes
Q.714	Signalling connection control part procedures
Q.715	Signalling connection control part user guide
Q.716	Signalling System No. 7 - Signalling connection control part (SCCP) performance
Q.721	Functional description of the Signalling System No. 7 Telephone User Part (TUP)
Q.722	General function of telephone messages and signals
Q.723	Telephone user part formats and codes A Corrigendum was indicated in 03/1993.
Q.724	Telephone user part signalling procedures
Q.725	Signalling performance in the telephone application
Q.730	ISDN User Part supplementary services
Q.731.1	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Direct-dialling-in (DDI)
Q.731.3	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Stage 3 description for number identification supplementary services using Signalling System No.7 - Calling line identification presentation
Q.731.4	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Stage 3 description for number identification supplementary services using Signalling System No.7 - Calling line identification restriction
Q.731.5	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Stage 3 description for number identification supplementary services using Signalling System No.7 - Connected line identification presentation
Q.731.6	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Stage 3 description for number identification supplementary services using Signalling System no.7 - Connected line identification restriction
Q.731.7	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Malicious call identification (MCID)
Q.731.8	Stage 3 description for number identification supplementary services using Signalling System No. 7 : Sub-addressing (SUB) Published with ITU-T Q.731.1.
Q.732.2	Stage 3 description for call offering supplementary services using Signalling System No. 7 : Call diversion services: - Call forwarding busy - Call forwarding no reply - Call forwarding unconditional - Call deflection Call diversion Recommendation groups four services the stage 3 descriptions of which are similar: Q.732.2 - Call Forwarding Busy (CFB) Q.732.3 - Call Forwarding No Reply (CFNR) Q.732.4 - Call Forwarding Unconditional (CFU) Q.732.5 - Call Deflection (CD).
Q.732.7	Stage 3 description for call offering supplementary services using Signalling System No. 7 : Explicit call transfer
Q.733.1	Stage 3 description for call completion supplementary services using Signalling System No. 7 : Call waiting (CW)
Q.733.2	Stage 3 description for call completion supplementary services using Signalling System No. 7 : Call hold (HOLD) Published with ITU-T Q.733.4.
Q.733.3	Stage 3 description for call completion supplementary services using Signalling System No. 7 : Completion of calls to busy subscriber (CCBS)
Q.733.4	Stage 3 description for call completion supplementary services using Signalling System No. 7 : Terminal portability (TP) Published with ITU-T Q.733.2.
Q.733.5	Stage 3 description for call completion supplementary services using Signalling System No. 7 : Completion of calls on no reply
Q.734.1	Stage 3 description for multiparty supplementary services using Signalling System No. 7 : Conference calling Published with ITU-T Q.734.2. Covering note, June 1999: Information note
Q.734.2	Stage 3 description for multiparty supplementary services using Signalling System No. 7 : Three-party service
Q.735.1	Stage 3 description for community of interest supplementary services using Signalling System No. 7 : Closed user group (CUG)
Q.735.3	Stage 3 description for community of interest supplementary services using Signalling System No. 7 : Multi-level precedence and preemption
Q.735.6	Stage 3 description for community of interest supplementary services using Signalling System No. 7 : Global virtual network service (GVNS)
Q.736.1	Stage 3 description for charging supplementary services using Signalling System No. 7 : International Telecommunication Charge Card (ITCC)
Q.736.3	Stage 3 description for charging supplementary services using Signalling System No. 7 : Reverse charging (REV)
Q.737.1	Stage 3 description for additional information transfer supplementary services using Signalling System No. 7 : User-to-user signalling (UUS)
Q.741	[Withdrawn] Signalling System No. 7 - Data user part This Recommendation was published under alias number X.61. It was discontinued because it was no longer used
Q.750	Overview of Signalling System No. 7 management
Q.751.1	Network element management information model for the Message Transfer Part (MTP)
Q.751.2	Network element management information model for the Signalling Connection Control Part
Q.751.3	Network element information model for MTP accounting
Q.751.4	Network element information model for SCCP accounting and accounting verification
Q.752	Monitoring and measurements for Signalling System No. 7 networks
Q.753	Signalling System No. 7 management functions MRVT, SRVT and CVT and definition of the OMASE-user
Q.754	Signalling System No. 7 management application service element (ASE) definitions
Q.755	Signalling System No. 7 protocol tests
Q.755.1	MTP protocol tester
Q.755.2	Transaction capabilities test responder
Q.756	Guidebook to Operations, Maintenance and Administration Part (OMAP)
Q.761	Signalling System No. 7 - ISDN User Part functional description
Q.762	Signalling System No. 7 - ISDN User Part general functions of messages and signals
Q.763	Signalling System No. 7 - ISDN User Part formats and codes
Q.764	Signalling System No. 7 - ISDN User Part signalling procedures
Q.765	Signalling system No. 7 - Application transport mechanism
Q.765bis	Signalling system No. 7 - Application transport mechanism: Test suite structure and test purposes (TSS & TP)
Q.765.1	Signalling system No. 7 - Application transport mechanism: Support of VPN applications with PSS1 information flows
Q.765.1bis	Abstract test suite for the APM support of VPN applications
Q.765.4	Signalling system No. 7 - Application transport mechanism: Support of the generic addressing and transport protocol
Q.765.5	Signalling system No. 7 - Application transport mechanism: Bearer Independent Call Control (BICC)
Q.766	Performance objectives in the integrated services digital network application
Q.767	Application of the ISDN User Part of CCITT signalling system No. 7 for international ISDN interconnections
Q.768	Signalling interface between an international switching centre and an ISDN satellite subnetwork
Q.769.1	Signalling system No. 7 - ISDN user part enhancements for the support of number portability
Q.771	Functional description of transaction capabilities
Q.772	Transaction capabilities information element definitions
Q.773	Transaction capabilities formats and encoding
Q.774	Transaction capabilities procedures
Q.775	Guidelines for using transaction capabilities
Q.780	Signalling System No. 7 test specification - General description
Q.781	MTP level 2 test specification
Q.782	MTP level 3 test specification
Q.783	TUP test specification
Q.784	ISUP basic call test specification
Q.784.1	ISUP basic call test specification: Validation and compatibility for ISUP'92 and Q.767 protocols
Q.784.2	ISUP basic call test specification: Abstract test suite for ISUP'92 basic call control procedures This Recommendation includes one diskette containing Annex D ISUP'92 ATS for basic call in graphical and in machine processable form.
Q.784.3	ISUP basic call test specification: ISUP '97 basic call control procedures - Test suite structure and test purposes (TSS & TP)
Q.785	ISUP protocol test specification for supplementary services
Q.785.2	ISUP'97 supplementary services - Test suite structure and test purposes (TSS & TP) This Recommendation includes one CD-ROM containing the ISUP'97 ATS for supplementary services in machine processable form and in graphical form.
Q.786	SCCP test specification
Q.787	Transaction capabilities (TC) test specification
Q.788	User-network-interface to user-network-interface compatibility test specifications for ISDN, non-ISDN and undetermined accesses interworking over international ISUP
Q.795	[Withdrawn] Operations, Maintenance and Administration Part (OMAP) The content of this Recommendation is now covered by ITU-T Q.75x series
Q.811	Lower layer protocol profiles for the Q and X interfaces
Q.812	Upper layer protocol profiles for the Q and X interfaces
Q.813	Security transformations application service element for remote operations service element (STASE-ROSE)
Q.814	Specification of an electronic data interchange interactive agent
Q.815	Specification of a security module for whole message protection
Q.816	CORBA-based TMN services
Q.816.1	CORBA-based TMN services: Extensions to support coarse-grained interfaces
Q.816.2	CORBA-based TMN services: Extensions to support service-oriented interfaces
Q.817	TMN PKI - Digital certificates and certificate revocation lists profiles
Q.818	Web service-based management services
Q.819	REST-based management services
Q.821	Stage 2 and Stage 3 description for the Q3 interface - Alarm Surveillance
Q.821.1	CORBA-based TMN alarm surveillance service
Q.822	Stage 1, stage 2 and stage 3 description for the Q3 interface - Performance management
Q.822.1	CORBA-based TMN performance management service
Q.823	Stage 2 and stage 3 functional specifications for traffic management
Q.823.1	Management Conformance Statement Proformas
Q.824.0	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Common information
Q.824.1	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Integrated Services Digital Network (ISDN) basic and primary rate access
Q.824.2	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Integrated Services Digital Network (ISDN) supplementary services
Q.824.3	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Integrated Services Digital Network (ISDN) optional user facilities
Q.824.4	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Integrated Services Digital Network (ISDN) teleservices
Q.824.5	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Configuration management of V5 interface environments and associated customer profiles
Q.824.6	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Broadband Switch Management
Q.824.7	Stage 2 and stage 3 description for the Q3 interface - Customer administration : Enhanced broadband switch management
Q.825	Specification of TMN applications at the Q3 interface: call detail recording
Q.826	Routing management model
Q.827.1	Requirements and analysis for the common management functions of NMS-EMS interfaces
Q.831	Fault and performance management of V5 interface environments and associated customer profiles
Q.831.1	Access Management for V5
Q.832.1	VB5.1 Management
Q.832.2	VB5.2 Management
Q.832.3	Broadband access coordination 5286
Q.833.1	Asymmetric digital subscriber line (ADSL) - Network element management: CMIP model
Q.834.1	ATM-PON requirements and managed entities for the network and network element views
Q.834.2	[Withdrawn] ATM-PON requirements and managed entities for the network view Deleted on 2004-09-30, its content having been merged into 2004 version of ITU-T Rec. Q.834.1
Q.834.3	A UML description for management interface requirements for Broadband Passive Optical Networks
Q.834.4	A CORBA interface specification for Broadband Passive Optical Networks based on UML interface requirements
Q.835	Line and line circuit test management of ISDN and analogue customer accesses
Q.836.1	SSF management information model
Q.837.1	SDH-DLC functional requirements for the network and network element views
Q.837.2	Use case descriptions and analysis for SDH-DLC network level management interface
Q.838.1	Requirements and analysis for the management interface of Ethernet Passive Optical Networks (EPON)
Q.840.1	Requirements and analysis for NMS-EMS management interface of Ethernet over Transport and Metro Ethernet Network (EoT/MEN)
Q.850	Usage of cause and location in the Digital Subscriber Signalling System No. 1 and the Signalling System No. 7 ISDN user part
Q.860	Integrated services digital network (ISDN) and broadband integrated services digital network (B-ISDN) generic addressing and transport (GAT) protocol
Q.920	ISDN user-network interface data link layer - General aspects This Recommendation is also included but not published in I series under alias number I.440
Q.921	ISDN user-network interface - Data link layer specification This Recommendation is also included but not published in I series under alias number I.441.
Q.921bis	Abstract test suite for LAPD conformance testing This Recommendation includes 5 diskettes containing postscript files of ATS for testing conformance of basic rate user side equipment to Rec. Q.921.
Q.922	ISDN data link layer specification for frame mode bearer services
Q.923	Specification of a synchronization and coordination function for the provision of the OSI connection-mode network service in an ISDN environment
Q.930	ISDN user-network interface layer 3 - General aspects This Recommendation is also included but not published in I series under alias number I.450
Q.931	ISDN user-network interface layer 3 specification for basic call control This Recommendation is also included but not published in I series under alias number I.451
Q.931bis	[Withdrawn] PICS and abstract test suite for ISDN DSS1 layer 3 - Circuit mode, basic call control conformance testing
Q.932	Digital subscriber signalling system No. 1 - Generic procedures for the control of ISDN supplementary services This Recommendation is also included but not published in I series under alias number I.452.
Q.933	ISDN Digital Subscriber Signalling System No. 1 (DSS1) - Signalling specifications for frame mode switched and permanent virtual connection control and status monitoring
Q.933bis	Abstract test suite - Signalling specification for frame mode basic call control conformance testing for permanent virtual connections (PVCs) This Recommendation includes one diskette containing Abstract test suites Section II corresponding to additional procedures for PVCs as per ITU-T Q.933 Annex A.
Q.939	Typical DSS1 service indicator codings for ISDN telecommunications services
Q.940	ISDN user-network interface protocol for management - General aspects
Q.941	ISDN user-network interface protocol profile for management
Q.950	Supplementary services protocols, structure and general principles
Q.951.1	Stage 3 description for number identification supplementary services using DSS 1 : Direct-dialling-in (DDI) Q.951 parts 1, 2 and 8 published together
Q.951.2	Stage 3 description for number identification supplementary services using DSS 1 : Multiple subscriber number (MSN) Q.951 parts 1, 2 and 8 published together
Q.951.3	Stage 3 description for number identification supplementary services using DSS 1 : Calling line identification presentation Q.951 parts 3-6 published together
Q.951.4	Stage 3 description for number identification supplementary services using DSS 1 : Calling line identification restriction Q.951 parts 3-6 published together
Q.951.5	Stage 3 description for number identification supplementary services using DSS 1 : Connected line identification presentation Q.951 parts 3-6 published together
Q.951.6	Stage 3 description for number identification supplementary services using DSS 1 : Connected line identification restriction Q.951 parts 3-6 published together
Q.951.7	Stage 3 description for number identification supplementary services using DSS 1 : Malicious call identification (MCID)
Q.951.8	Stage 3 description for number identification supplementary services using DSS 1 : Sub-addressing (SUB) Q.951 parts 1, 2 and 8 published together
Q.952	Stage 3 description for call offering supplementary services using DSS1 - Diversion supplementary services
Q.952.7	Stage 3 description for call offering supplementary services using DSS1: Explicit call transfer (ECT)
Q.953.1	Stage 3 description for call completion supplementary services using DSS 1 : Call waiting
Q.953.2	Stage 3 description for call completion supplementary services using DSS 1 : Call hold
Q.953.3	Stage 3 description for call completion supplementary services using DSS 1 : Completion of calls to busy subscribers (CCBS)
Q.953.4	Stage 3 description for call completion supplementary services using DSS 1 : Terminal Portability (TP)
Q.953.5	Stage 3 description for call completion supplementary services using DSS 1 : Call Completion on No Reply (CCNR) This Recommendation includes one diskette containing the SDL process diagrams of DSS1 CCNR in machine processable form and in graphical form.
Q.954.1	Stage 3 description for multiparty supplementary services using DSS 1 : Conference calling Covering note, June 1999: Information note
Q.954.2	Stage 3 description for multiparty supplementary services using DSS 1 : Three-party service (3PTY)
Q.955.1	Stage 3 description for community of interest supplementary services using DSS 1 : Closed user group
Q.955.3	Stage 3 description for community of interest supplementary services using DSS 1 : Multi-level precedence and preemption (MLPP)
Q.956.2	Stage 3 description for charging supplementary services using DSS 1 : Advice of charge
Q.956.3	Stage 3 description for charging supplementary services using DSS 1 : Reverse charging
Q.957.1	Stage 3 description for additional information transfer supplementary services using DSS 1 : User-to-user signalling (UUS)
Q.1000	[Withdrawn] Structure of the Q.1000-Series Recommendations for public land mobile networks This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1001	General aspects of public land mobile networks
Q.1002	[Withdrawn] Network functions This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1003	[Withdrawn] Location registration procedures This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1004	[Withdrawn] Location register restoration procedures This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1005	[Withdrawn] Handover procedures This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1031	[Withdrawn] General signalling requirements on interworking between the ISDN or PSTN and the PLMN Formerly Q.70 (1984). This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1032	[Withdrawn] Signalling requirements relating to routing of calls to mobile subscribers This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1051	[Withdrawn] Mobile application Part This Recommendation was made for second generation of mobile systems. For this generation, three specifications have been developed by regional standards organizations. These implementations were complying with the philosophy of intentions of the Q.1000-Series of Recommendations, but they were modified and enhanced to include new functions and to handle regional network dependant features. These regional specifications supersede ITU-T Q.1051 (1988)
Q.1061	[Withdrawn] General aspects and principles relating to digital PLMN access signalling reference points This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1062	[Withdrawn] Digital PLMN access signalling reference configurations This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1063	[Withdrawn] Digital PLMN channel structures and access capabilities at the radio interface (Um reference point) This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Q.1100	Structure of the Recommendations on the INMARSAT mobile satellite systems
Q.1101	General requirements for the interworking of the terrestrial telephone network and INMARSAT Standard A system
Q.1102	Interworking between Signalling System R2 and INMARSAT Standard A system
Q.1103	Interworking between Signalling System No. 5 and INMARSAT Standard A system
Q.1111	Interfaces between the INMARSAT Standard B system and the international public switched telephone network/ISDN
Q.1112	Procedures for interworking between INMARSAT Standard-B system and the international public switched telephone network/ISDN
Q.1151	Interfaces for interworking between the INMARSAT aeronautical mobile-satellite system and the international public switched telephone network/ISDN
Q.1152	Procedures for interworking between INMARSAT aeronautical mobile satellite system and the international public switched telephone network/ISDN
Q.1200	General series Intelligent Network Recommendation structure
Q.1201	Principles of intelligent network architecture This Recommendation is published with the double number Q.1201 and I.312. For more details see I.312
Q.1202	Intelligent network - Service plane architecture This Recommendation is published with the double number Q.1202 and I.328. For more details see I.328
Q.1203	Intelligent network - Global functional plane architecture This Recommendation is published with the double number Q.1203 and I.329. For more details see I.329
Q.1204	Intelligent network distributed functional plane architecture
Q.1205	Intelligent network physical plane architecture
Q.1208	General aspects of the intelligent network application protocol
Q.1210	Q.1210-series intelligent network Recommendation structure
Q.1211	Introduction to intelligent network capability set 1
Q.1213	Global functional plane for intelligent network CS-1
Q.1214	Distributed functional plane for intelligent network CS-1
Q.1215	Physical plane for intelligent network CS-1
Q.1218	Interface Recommendation for intelligent network CS-1
Q.1219	Intelligent network user's guide for Capability Set 1
Q.1220	Q.1220-Series intelligent network Capability Set 2 Recommendation structure
Q.1221	Introduction to intelligent network Capability Set 2
Q.1222	Service plane for intelligent network Capability Set 2
Q.1223	Global functional plane for intelligent network Capability Set 2
Q.1224	Distributed functional plane for intelligent network Capability Set 2 This Recommendation is published in three fascicles.
Q.1225	Physical plane for intelligent network Capability Set 2
Q.1228	Interface Recommendation for intelligent network Capability Set 2 This Recommendation includes 3 diskettes containing Q.1228 SDL diagrams in SDT source format and in PDF format.
Q.1229	Intelligent Network user's guide for Capability Set 2 This Recommendation is published in 5 fascicles.
Q.1231	Introduction to Intelligent Network Capability Set 3
Q.1236	Intelligent Network Capability Set 3 - Management Information Model Requirements and Methodology
Q.1237	Extensions to Intelligent Network Capability Set 3 in support of B-ISDN
Q.1238.1	Interface Recommendation for intelligent network capability set 3 : Common aspects
Q.1238.2	Interface Recommendation for intelligent network capability set 3 : SCF-SSF interface
Q.1238.3	Interface Recommendation for intelligent network capability set 3 : SCF-SRF interface
Q.1238.4	Interface Recommendation for intelligent network capability set 3 : SCF-SDF interface
Q.1238.5	Interface Recommendation for intelligent network capability set 3 : SDF-SDF interface
Q.1238.6	Interface Recommendation for intelligent network capability set 3 : SCF-SCF interface
Q.1238.7	Interface Recommendation for intelligent network capability set 3 : SCF-CUSF interface
Q.1241	Introduction to Intelligent Network Capability Set 4
Q.1244	Distributed functional plane for Intelligent Network Capability Set 4
Q.1248.1	Interface Recommendation for Intelligent Network Capability Set 4 : Common aspects
Q.1248.2	Interface Recommendation for Intelligent Network Capability Set 4 : SCF-SSF interface
Q.1248.3	Interface Recommendation for Intelligent Network Capability Set 4 : SCF-SRF interface
Q.1248.4	Interface Recommendation for Intelligent Network Capability Set 4 : SCF-SDF interface
Q.1248.5	Interface Recommendation for Intelligent Network Capability Set 4 : SDF-SDF interface
Q.1248.6	Interface Recommendation for Intelligent Network Capability Set 4 : SCF-SCF interface
Q.1248.7	Interface Recommendation for Intelligent Network Capability Set 4 : SCF-CUSF interface
Q.1290	Glossary of terms used in the definition of intelligent networks
Q.1300	Telecommunication applications for switches and computers (TASC) - General overview
Q.1301	Telecommunication applications for switches and computers (TASC) - TASC Architecture
Q.1302	Telecommunication applications for switches and computers (TASC) - TASC functional services
Q.1303	Telecommunication applications for switches and computers (TASC) - TASC Management: Architecture, methodology and requirements
Q.1400	Architecture framework for the development of signalling and OA&M protocols using OSI concepts
Q.1521	[Withdrawn] Requirements on underlying networks and signalling protocols to support UPT Deleted in 2022 as a consequence of the suppression of the Universal Personal Telecommunication (UPT) service
Q.1531	[Withdrawn] UPT security requirements for Service Set 1 Deleted in 2022 as a consequence of the suppression of the Universal Personal Telecommunication (UPT) service
Q.1541	[Withdrawn] UPT stage 2 for Service Set 1 on IN CS-1 - Procedures for universal personal telecommunication: Functional modelling and information flows Deleted in 2022 as a consequence of the suppression of the Universal Personal Telecommunication (UPT) service
Q.1542	[Withdrawn] UPT stage 2 for Service Set 1 on IN CS-2 - Procedures for universal personal telecommunication: Functional modelling and information flows Deleted in 2022 as a consequence of the suppression of the Universal Personal Telecommunication (UPT) service
Q.1551	[Withdrawn] Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT service set 1 Deleted in 2022 as a consequence of the suppression of the Universal Personal Telecommunication (UPT) service
Q.1600	Signalling System No. 7 - Interaction between ISUP and INAP
Q.1600bis	Signalling system No. 7 - Interaction between ISDN user part ISUP '97 and INAP CS-1: Test suite structure and test purposes (TSS & TP)
Q.1601	Signalling system No. 7 - Interaction between N-ISDN and INAP CS-2
Q.1701	Framework for IMT-2000 networks
Q.1702	Long-term vision of network aspects for systems beyond IMT-2000
Q.1703	Service and network capabilities framework of network aspects for systems beyond IMT-2000
Q.1704	Functional network architecture for IMT-Advanced
Q.1706	Mobility management requirements for NGN
Q.1707	Generic framework of mobility management for next generation networks
Q.1708	Framework of location management for NGN
Q.1709	Framework of handover control for NGN
Q.1711	Network functional model for IMT-2000
Q.1721	Information flows for IMT-2000 capability set 1
Q.1731	Radio-technology independent requirements for IMT-2000 layer 2 radio interface
Q.1741.1	IMT-2000 references to release 1999 of GSM evolved UMTS core network with UTRAN access network
Q.1741.2	IMT-2000 references to release 4 of GSM evolved UMTS core network with UTRAN access network
Q.1741.3	IMT-2000 references to release 5 of GSM evolved UMTS core network
Q.1741.4	IMT-2000 references to release 6 of GSM evolved UMTS core network
Q.1741.5	IMT-2000 references to Release 7 of GSM-evolved UMTS core network
Q.1741.6	IMT-2000 references to Release 8 of GSM-evolved UMTS core network
Q.1741.7	IMT-2000 references to Release 9 of GSM-evolved UMTS core network
Q.1741.8	IMT-2000 references to Release 10 of GSM-evolved UMTS core network
Q.1741.9	IMT-2000 references to Release 11 of GSM evolved UMTS core network
Q.1742.1	IMT-2000 references to ANSI-41 evolved core network with cdma2000 access network
Q.1742.2	IMT-2000 references (approved as of 11 July 2002) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.3	IMT-2000 references (approved as of 30 June 2003) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.4	IMT-2000 references (approved as of 30 June 2004) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.5	IMT-2000 references (approved as of 31 December 2005) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.6	IMT-2000 references (approved as of 31 December 2006) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.7	IMT-2000 references (approved as of 30 June 2008) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.8	IMT-2000 references (approved as of 31 January 2010) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.9	IMT-2000 references (approved as of 31 December 2010) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.10	IMT-2000 references (approved as of 31 December 2011) to ANSI-41 evolved core network with cdma2000 access network
Q.1742.11	IMT 2000 references (approved as of 31 December 2012) to ANSI-41 evolved core network with cdma2000 access network
Q.1743	IMT-Advanced references to Release 11 of LTE-Advanced evolved packet core network
Q.1751	Internetwork signalling requirements for IMT-2000 capability set 1
Q.1761	Principles and requirements for convergence of fixed and existing IMT-2000 systems
Q.1762	Fixed-mobile convergence general requirements
Q.1763	FMC service using legacy PSTN or ISDN as the fixed access network for mobile network users
Q.1901	Bearer Independent Call Control protocol
Q.1902.1	Bearer Independent Call Control protocol (Capability Set 2): Functional description
Q.1902.2	Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No.7 ISDN User Part: General functions of messages and parameters
Q.1902.3	Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No.7 ISDN User Part: Formats and codes
Q.1902.4	Bearer independent call control protocol (Capability Set 2): Basic call procedures
Q.1902.5	Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the Application transport mechanism in the context of BICC
Q.1902.6	Bearer Independent Call Control protocol (Capability Set 2): Generic signalling procedures for the support of the ISDN User Part supplementary services and for bearer redirection
Q.1912.1	Interworking between Signalling System No. 7 ISDN user part and the Bearer Independent Call Control protocol
Q.1912.2	Interworking between selected signalling systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol
Q.1912.3	Interworking between H.323 and the Bearer Independent Call Control protocol
Q.1912.4	Interworking between Digital Subscriber Signalling System No. 2 and the Bearer Independent Call Control protocol
Q.1912.5	Interworking between session initiation protocol (SIP) and bearer independent call control protocol or ISDN user part
Q.1912.5B	Interworking between session initiation protocol (SIP) and bearer independent call control protocol (BICC) or ISDN user part (ISUP): Protocol implementation conformance statement (PICS)
Q.1912.5C	Interworking between session initiation protocol (SIP) and bearer independent call control protocol (BICC) or ISDN user part (ISUP): Test suite structure and test purposes (TSS&TP) for profiles A and B
Q.1912.5D	Interworking between session initiation protocol (SIP) and bearer independent call control protocol (BICC) or ISDN user part (ISUP): Test suite structure and test purposes (TSS&TP) for profile C
Q.1912.5E	Interworking between session initiation protocol (SIP) and bearer independent call control protocol (BICC) or ISDN user part (ISUP): Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) for profiles A and B
Q.1912.5F	Interworking between session initiation protocol (SIP) and bearer independent call control protocol (BICC) or ISDN user part (ISUP): Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) for profile C
Q.1922.2	Interaction between the Intelligent Network Application Protocol Capability Set 2 and the Bearer Independent Call Control protocol
Q.1922.4	Interaction between the Intelligent Network application CS-4 protocol and the Bearer Independent Call Control protocol
Q.1930	BICC access network protocol
Q.1950	Bearer independent call bearer control protocol
Q.1970	BICC IP bearer control protocol
Q.1980.1	The Narrowband Signalling Syntax (NSS) - Syntax definition
Q.1990	BICC Bearer Control Tunnelling Protocol
Q.2010	Broadband integrated services digital network overview - Signalling capability set 1, release 1
Q.2100	B-ISDN signalling ATM adaptation layer (SAAL) - Overview description
Q.2110	B-ISDN ATM adaptation layer - Service specific connection oriented protocol (SSCOP)
Q.2111	B-ISDN ATM adaptation layer - Service specific connection oriented protocol in a multilink and connectionless environment (SSCOPMCE)
Q.2119	B-ISDN ATM adaptation layer - Convergence function for SSCOP above the frame relay core service
Q.2120	B-ISDN meta-signalling protocol
Q.2130	B-ISDN signalling ATM adaptation layer - Service specific coordination function for support of signalling at the user-network interface (SSCF at UNI)
Q.2140	B-ISDN ATM adaptation layer - Service specific coordination function for signalling at the network node interface (SSCF at NNI)
Q.2144	B-ISDN signalling ATM adaptation layer - Layer management for the SAAL at the network node interface
Q.2150.0	Generic signalling transport service
Q.2150.1	Signalling transport converter on MTP3 and MTP3b
Q.2150.2	Signalling transport converter on SSCOP and SSCOPMCE
Q.2150.3	Signalling transport converter on SCTP
Q.2210	Message transfer part level 3 functions and messages using the services of ITU-T Recommendation Q.2140
Q.2220	Transport-Independent Signalling Connection Control Part (TI-SCCP)
Q.2610	Usage of cause and location in B-ISDN user part and DSS2
Q.2630.1	AAL type 2 signalling protocol - Capability Set 1
Q.2630.2	AAL type 2 signalling protocol - Capability Set 2
Q.2630.3	AAL type 2 signalling protocol - Capability Set 3
Q.2631.1	IP connection control signalling protocol - Capability Set 1
Q.2632.1	Interworking between AAL type 2 signalling protocol Capability Set 2 and IP connection control signalling protocol Capability Set 1
Q.2650	Interworking between signalling system No. 7 broadband ISDN User Part (B-ISUP) and digital subscriber signalling system No. 2 (DSS2)
Q.2660	Interworking between signalling system No. 7 broadband ISDN user part (B-ISUP) and narrow-band ISDN user part (N-ISUP)
Q.2721.1	[Withdrawn] B-ISDN user part - Overview of the B-ISDN network node interface signalling capability set 2, step 1 The content of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2722.1	B-ISDN user part - Network node interface specification for point-to-multipoint call/connection control
Q.2723.1	[Withdrawn] B-ISDN user part - Support of additional traffic parameters for sustainable cell rate and quality of service The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2723.2	[Withdrawn] Extensions to the B-ISDN User Part - Support of ATM transfer capability in the broadband bearer capability parameter The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2723.3	[Withdrawn] Extensions to the B-ISDN User Part - Signalling capabilities to support traffic parameters for the available bit rate (ABR) ATM transfer capability The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2723.4	[Withdrawn] Extensions to the B-ISDN User Part - Signalling capabilities to support traffic parameters for the ATM block transfer (ABT) ATM transfer capability The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2723.5	[Withdrawn] B-ISDN User Part - Support of cell delay variation tolerance indication The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2723.6	[Withdrawn] Extensions to the signalling system No. 7 B-ISDN user part - Signalling capabilities to support the indication of the statistical bit rate configuration 2 (SBR 2) and 3 (SBR 3) ATM transfer capabilities The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2724.1	B-ISDN user part - Look-ahead without state change for the network node interface
Q.2725.1	[Withdrawn] B-ISDN user part - Support of negotiation during connection setup The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2725.2	[Withdrawn] B-ISDN user part - Modification procedures The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2725.3	[Withdrawn] Extensions to the B-ISDN User Part - Modification procedures for sustainable cell rate parameters The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2725.4	[Withdrawn] Extensions to the signalling system No. 7 B-ISDN user part - Modification procedures with negotiation The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2726.1	[Withdrawn] B-ISDN user part - ATM end system address The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2726.2	B-ISDN user part - Call priority
Q.2726.3	B-ISDN user part - Network generated session identifier
Q.2726.4	Extensions to the B-ISDN User Part - Application generated identifiers
Q.2727	[Withdrawn] B-ISDN user part - Support of frame relay The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Q.2730	Signalling system No. 7 B-ISDN user part (B-ISUP) - Supplementary services
Q.2735.1	Stage 3 description for community of interest supplementary services for B-ISDN using SS No. 7 : Closed User Group (CUG)
Q.2751.1	Extension of Q.751.1 for SAAL signalling links
Q.2761	Functional description of the B-ISDN user part (B-ISUP) of signalling system No. 7
Q.2762	General functions of messages and signals of the B-ISDN User Part (B-ISUP) of Signalling System No. 7
Q.2763	Signalling System No. 7 B-ISDN User Part (B-ISUP) - Formats and codes
Q.2764	Signalling System No. 7 B-ISDN User Part (B-ISUP) - Basic call procedures
Q.2765	Signalling System No. 7 B-ISDN User Part (B-ISUP) - Application transport mechanism (APM)
Q.2766.1	Switched virtual path capability
Q.2767.1	Soft PVC capability
Q.2769.1	Support of number portability information across B-ISUP
Q.2920	Broadband integrated services digital network (B-ISDN) - Digital Subscriber Signalling System No. 2 (DSS 2): Call/connection control for the support of ATM-MPLS network interworking
Q.2931	Digital Subscriber Signalling System No. 2 - User-Network Interface (UNI) layer 3 specification for basic call/connection control Modified by ITU-T Q.2971 (10/1995).
Q.2931B	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Protocol implementation conformance statement (PICS) proforma ITU-T Q.2931 B was previously numbered as Q.2931 bis during the approval process
Q.2931C	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2931 C was previously numbered as Q.2931 ter during the approval process
Q.2931D	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the user ITU-T Q.2931 D was previously numbered as Q.2931 quater during the approval process
Q.2931E	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2931 E was previously numbered as Q.2931 quinquies during the approval process
Q.2931F	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network ITU-T Q.2931 F was previously numbered as Q.2931 sexies during the approval process
Q.2932.1	Digital subscriber signalling system No. 2 - Generic functional protocol : Core functions
Q.2933	Digital subscriber signalling system No. 2 - Signalling specification for frame relay service
Q.2934	Digital subscriber signalling system No. 2 - Switched virtual path capability
Q.2939.1	Digital Subscriber Signalling System No. 2 - Application of DSS2 service-related information elements by equipment supporting B-ISDN services
Q.2941.1	Digital Subscriber Signalling System No. 2 - Generic identifier transport
Q.2941.2	Digital Subscriber Signalling System No. 2 - Generic identifier transport extensions
Q.2941.3	Digital Subscriber Signalling System No. 2 - Generic identifier transport extension for support of bearer independent call control
Q.2951	Stage 3 description for number identification supplementary services using B-ISDN Digital Subscriber Signalling System No. 2 (DSS2 ) - Basic Call
Q.2951.9	Stage 3 description for number identification supplementary services using B-ISDN digital subscriber signalling system No. 2 (DSS2 ) - Basic Call : Support of ATM end system addressing format by Number identification supplementary services
Q.2955.1	Stage 3 description for community of interest supplementary services using B-ISDN digital subscriber signalling system No. 2 (DSS2) : Closed User Group (CUG)
Q.2957.1	Stage 3 description for additional information transfer supplementary services using B-ISDN digital subscriber signalling system No. 2 (DSS2) - Basic call : User-to-user signalling (UUS) Modified by ITU-T Q.2971 (10/1995).
Q.2959	Digital subscriber signalling system No. 2 - Call priority
Q.2961B	Digital subscriber signalling system No. 2 (DSS2) - Additional traffic parameters: Protocol implementation conformance statement (PICS) proforma ITU-T Q.2961 B was previously numbered as Q.2961 bis during the approval process
Q.2961C	Digital subscriber signalling system No. 2 (DSS2) - Additional traffic parameters: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2961 C was previously numbered as Q.2961 ter during the approval process
Q.2961D	Digital subscriber signalling system No. 2 (DSS2) - Additional traffic parameters: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the user ITU-T Q.2961 D was previously numbered as Q.2961 quater during the approval process
Q.2961E	Digital subscriber signalling system No. 2 (DSS2) - Additional traffic parameters: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2961 E was previously numbered as Q.2961 quinquies during the approval process
Q.2961F	Digital subscriber signalling system No. 2 (DSS2) - Additional traffic parameters: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the Network ITU-T Q.2961 F was previously numbered as Q.2961 sexies during the approval process
Q.2961.1	Digital subscriber signalling system No. 2 - Additional traffic parameters : Additional signalling capabilities to support traffic parameters for the tagging option and the sustainable cell rate parameter set
Q.2961.2	Digital subscriber signalling system No. 2 - Additional traffic parameters : Support of ATM Transfer capability in the broadband bearer capability information element
Q.2961.3	Digital subscriber signalling system No. 2 - Additional traffic parameters : Signalling capabilities to support traffic parameters for the available bit rate (ABR) ATM transfer capability
Q.2961.4	Digital subscriber signalling system No. 2 - Additional traffic parameters : Signalling capabilities to support traffic parameters for the ATM Block Transfer (ABT) ATM transfer capability
Q.2961.5	Digital subscriber signalling system No. 2 - Additional traffic parameters : Additional traffic parameters for cell delay variation tolerance indication
Q.2961.6	Digital subscriber signalling system No. 2 - Additional traffic parameters : Additional signalling procedures for the support of the SBR2 and SBR3 ATM transfer capabilities
Q.2962	Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase
Q.2962B	Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Protocol Implementation Conformance Statement (PICS) proforma ITU-T Q.2962 B was previously numbered as Q.2962 bis during the approval process
Q.2962C	Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2962 C was previously numbered as Q.2962 ter during the approval process
Q.2962D	Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the user ITU-T Q.2962 D was previously numbered as Q.2962 quater during the approval process
Q.2962E	Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2962 E was previously numbered as Q.2962 quinquies during the approval process
Q.2962F	Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Abstract test suite (ATS) and partial protocol Implementation extra information for testing (PIXIT) proforma for the network ITU-T Q.2962 F was previously numbered as Q.2962 sexies during the approval process
Q.2963.1	Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner
Q.2963.1B	Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Protocol implementation conformance statement (PICS) proforma ITU-T Q.2963.1 B was previously numbered as Q.2963.1 bis during the approval process
Q.2963.1C	Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2963.1 C was previously numbered as Q.2963.1 ter during the approval process
Q.2963.1D	Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the user ITU-T Q.2963.1 D was previously numbered as Q.2963.1 quater during the approval process
Q.2963.1E	Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2963.1 E was previously numbered as Q.2963.1 quinquies during the approval process
Q.2963.1F	Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the network ITU-T Q.2963.1 F was previously numbered as Q.2963.1 sexies during the approval process
Q.2963.2	Digital subscriber signalling system No. 2 - Connection modification : Modification procedures for sustainable cell rate parameters
Q.2963.3	Digital subscriber signalling system No. 2 - Connection modification : ATM traffic descriptor modification with negotiation by the connection owner
Q.2964.1	Digital subscriber signalling system No. 2 - Basic look-ahead
Q.2965.1	Digital subscriber signalling system No. 2 - Support of Quality of Service classes
Q.2965.1B	Digital subscriber signalling system No. 2 - Support of Quality of Service classes: Protocol Implementation Conformance Statement (PICS) proforma ITU-T Q.2965.1B was previously numbered as Q.2965.1 bis during the approval process
Q.2965.2	Digital subscriber signalling system No. 2 - Signalling of individual Quality of Service parameters
Q.2965.2B	Digital subscriber signalling system No. 2 - Signalling of individual Quality of Service parameters: Protocol Implementation Conformance Statement (PICS) proforma ITU-T Q.2965.2B was previously numbered as Q.2965.1 bis during the approval process
Q.2971	Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control Modifies ITU-T Q.2931, Q.2951 and Q.2957.
Q.2971C	Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Test Suite Structure and Test Purposes (TSS & TP) for the user ITU-T Q.2971 C was previously numbered as Q.2971 ter during the approval process
Q.2971D	Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra information for testing (PIXIT) proforma for the user ITU-T Q.2971 D was previously numbered as Q.2971 quater during the approval process
Q.2971E	Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Test Suite Structure and Test Purposes (TSS & TP) for the network ITU-T Q.2971 E was previously numbered as Q.2971 quinquies during the approval process
Q.2971F	Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network ITU-T Q.2971 F was previously numbered as Q.2971 sexies during the approval process
Q.2981	Broadband integrated services digital network (B-ISDN) and broadband private integrated services network (B-PISN) - Call control protocol
Q.2982	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - Q.2931-based separated call control protocol
Q.2983	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - Bearer control protocol
Q.2984	Broadband integrated services digital network (B-ISDN) and broadband private integrated services network (B-PISN) - Prenegotiation
Q.2991.1	Abstract test suite for the network integration testing for B-ISDN and B-ISDN/N-ISDN : TSS & TP
Q.2991.2	Abstract test suite for the network integration testing for B-ISDN and B-ISDN/N-ISDN : ICS & IXIT and ATS
Q.3030	Signalling architecture for the NGN service control plane
Q.3040	Signalling architecture for IPTV control plane
Q.3050	Description of signalling protocols supporting next generation network capability sets
Q.3051	Signalling architecture for the control plane of distributed service networking
Q.3052	Overview of application programming interfaces and protocols for the machine-to-machine service layer
Q.3053	Signalling architecture and requirements for IP-based short message service over ITU-T defined NGN
Q.3054	Signalling architecture for virtualization of control network entities
Q.3055	Signalling protocol for heterogeneous Internet of things gateways
Q.3056	Signalling procedures of the probes to be used for remote testing of network parameters
Q.3057	Signalling requirements and architecture for interconnection between trustable network entities
Q.3058	Signalling architecture of orchestration in next generation network evolution
Q.3059	Signalling requirements for service function discovery
Q.3060	Signalling architecture of fast deployment emergency telecommunication networks to be used in a natural disaster
Q.3061	Signalling requirements for service function paths load balancing traceroute in service function chaining
Q.3062	Signalling procedures and protocols for enabling interconnection between trustable network entities in support of existing and emerging networks
Q.3063	Signalling procedures of calling line identification authentication
Q.3064	Signalling architecture of NICE (Network intelligence capability enhancement) in support of awareness capabilities
Q.3150	Use of virtual trunks for ATM/MPLS client/server control plane interworking
Q.3151	ATM and frame relay/MPLS control plane interworking: Client-server
Q.3201	EAP-based security signalling protocol architecture for network attachment
Q.3202.1	Authentication protocols based on EAP-AKA for interworking among 3GPP, WiMax, and WLAN in NGN
Q.3203	Signalling requirements and architecture of NACF for IP mobility
Q.3220	Architectural framework for NACF signalling interface Recommendations
Q.3221	Requirements and protocol at the interface between the service control entity and the transport location management physical entity (S-TC1 interface)
Q.3222	Requirements and protocol at the interface between transport location management physical entities (Ng interface)
Q.3223	Requirements and protocol for the interface between a transport location management physical entity and a policy decision physical entity (Ru Interface)
Q.3228	Signalling requirements and protocol at the M1 interface between the transport location management physical entity and the mobile location management physical entity (P)
Q.3229	Signalling requirements and protocol at the M2 interface between the transport location management physical entity and the handover decision and control physical entity
Q.3230	Signalling requirements and protocol at the M13 interface between the transport location management and network information distribution physical entities
Q.3231	Signalling requirements and protocol at the Ne interface between the transport location management physical entity and the network access configuration physical entity
Q.3232	Signalling requirements and protocol at the Nc interface between the transport location management physical entity and the transport authentication and authorization physical entity
Q.3300	Architectural framework for the Q.330x series of Recommendations
Q.3301.1	Resource control protocol No. 1, version 3 - Protocol at the Rs interface between service control entities and the policy decision physical entity
Q.3302.1	Resource control protocol No. 2 (rcp2) - Protocol at the Rp interface between transport resource control physical entities
Q.3303.0	Resource control protocol No. 3 - Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Overview
Q.3303.1	Resource control protocol No. 3 - Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE): COPS alternative version 2
Q.3303.2	Resource control protocol No. 3 - Protocol at the interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE) (Rw interface): ITU-T H.248 alternative version 2
Q.3303.3	Resource control protocol No. 3 - Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Diameter profile version 3
Q.3304.1	Resource control protocol No. 4 (rcp4) - Protocols at the Rc interface between a transport resource control physical entity and a transport physical entity: COPS alternative
Q.3304.2	Resource control protocol No. 4 (rcp4) - Protocols at the Rc interface between a transport resource control physical entity and a transport physical entity: SNMP alternative
Q.3305.1	Resource control protocol No. 5 (rcp5) - Protocol at the interface between transport resource control physical entity and policy decision physical entity (Rt interface): Diameter-based
Q.3306.1	Resource control protocol No. 6 (rcp6) - Protocol at the interface between intra-domain policy decision physical entities (PD-PE) (Rd interface)
Q.3307.1	Resource control protocol No.7 - Protocol at the interface between inter-domain policy decision physical entities (Ri interface)
Q.3308.1	Resource control protocol No. 8 - Protocol at the interface between a policy decision physical entity and a customer premises network gateway policy enforcement physical entity (Rh interface): COPS alternative
Q.3309	QoS coordination protocol
Q.3311	Enhancement of resource and admission control protocols to use pre-congestion notification
Q.3312	Use of the access node control protocol on the Rp interface
Q.3313	Signalling protocols and procedures relating to flow state aware QoS control in a bounded subnetwork of a next generation network
Q.3314	Requirements and protocol at the interface between the mobile location management physical entity used as a proxy and the central instance of the mobile location management physical entity (M9 interface)
Q.3315	Signalling requirements for flexible network service combination on broadband network gateway
Q.3316	Interface and signalling requirements and specification for cross stratum optimization
Q.3320	Architectural framework for the Q.332x series of Recommendations
Q.3321.1	Resource control protocol No. 1, version 2 - Protocol at the Rs interface between service control entities and the policy decision physical entity
Q.3322	Resource control protocol No. 2 (rcp2) - Protocol at the Rp interface between transport resource control physical entities
Q.3325	Resource control protocol no.5 (rcp5) - Protocol at the interface between transport resource control physical entity and policy decision physical entity (Rt interface): Diameter-based
Q.3401	NGN NNI signalling profile (protocol set 1)
Q.3402	NGN UNI signalling profile (Protocol set 1)
Q.3403	IP multimedia call control protocol based on the session initiation protocol and the session description protocol - Basic call: Requirements for the user side and the network side
Q.3404	Signalling requirements for NGN real-time multimedia services supporting IPv6 transition
Q.3405	IPv6 protocol procedures for broadband services
Q.3406	Signalling requirements for telemetry of virtual broadband network services
Q.3610	Signalling requirements and protocol profiles for customized ring-back tone service
Q.3611	Signalling requirements and protocol profiles for NGN customized ringing tone service
Q.3612	Signalling Requirements and Protocol Profiles for IP Centrex service
Q.3613	Signalling requirements for touch screen terminal-based interactive voice response services
Q.3614	Originating identification presentation and originating identification restriction protocol specification as next-generation network supplementary service
Q.3615	Protocol for GeoSMS
Q.3616	Communication diversion protocol specification as an NGN supplementary service
Q.3617	Terminating identification presentation and terminating identification restriction using IP multimedia core network subsystem. Protocol specification
Q.3618	Originating identification presentation and originating identification restriction using IP multimedia core network subsystem - Protocol specification
Q.3619	Communication HOLD using IP multimedia core network subsystem - Protocol specification
Q.3620	Communication diversion using IP multimedia core network subsystem - Protocol specification
Q.3621	CONF using IP multimedia core network subsystem - Protocol specification
Q.3622	Communication waiting using IP multimedia core network subsystem - Protocol specification
Q.3623	Explicit communication transfer using IP multimedia core network subsystem - Protocol specification
Q.3624	Malicious communication identification using IP multimedia core network subsystem - Protocol specification
Q.3625	Completion of communications to busy subscriber and completion of communications by no reply using IP multimedia core network subsystem - Protocol specification
Q.3626	Message waiting indication using IP multimedia core network subsystem - Protocol specification
Q.3627	Closed user group using IP multimedia core network subsystem - Protocol specification
Q.3628	Anonymous communication rejection and communication barring using IP multimedia core network subsystem - Protocol specification
Q.3629	Interworking between the IP multimedia core network subsystem and circuit switched networks - Protocol specification
Q.3630	Inter-IMS network to network interface - Protocol specification
Q.3631	Interworking between ISDN and the IP multimedia core network subsystem
Q.3640	Framework of interconnection of VoLTE/ViLTE-based networks
Q.3641	IMS references to Release 11 for communication between IMS and NGN networks to support end-to-end service interoperability
Q.3642	IMS references to Release 12 for communication between IMS and NGN networks to support end-to-end service interoperability
Q.3643	Signalling architecture of distributed infrastructure ENUM networking for IMS
Q.3644	Requirements for signalling network analyses and optimization in VoLTE
Q.3645	Protocol at the interface between two distributed ENUM servers for IMS
Q.3646	Framework and protocols for signalling network analysis and optimization in VoLTE
Q.3647	Signalling requirements for emergency services in an Internet protocol multimedia subsystem roaming environment
Q.3648	Signalling architecture of data channel enhanced IMS network
Q.3652	Terminating Identification Presentation and Terminating Identification Restriction using IP Multimedia core network subsystem. Protocol specification
Q.3711	Signalling requirements for software-defined broadband access network
Q.3712	Scenarios and signalling requirements of unified intelligent programmable interface for IPv6
Q.3713	Signalling requirements for broadband network gateway pool
Q.3714	Signalling requirements of SDN-based access networks with media-independent management capabilities
Q.3715	Signalling requirements for dynamic bandwidth adjustment on demand on broadband network gateway implemented by software-defined networking technologies
Q.3716	Signalling requirements for mapping between physical and virtual networks
Q.3717	Signalling requirements for automatic management of IP address pools by software-designed network technologies on a broadband network gateway
Q.3718	Signalling requirements of the Sew interface for virtual data centres
Q.3719	Signalling requirements for the separation of control plane and user plane in a virtualized broadband network gateway (vBNG)
Q.3720	Procedures for virtualized broadband network gateway acceleration with programmable acceleration card
Q.3721	Procedures for a programming protocol independent packet processor switch-based virtual border network gateway
Q.3740	Signalling requirements for software-defined networking and network function virtualization-based central office services
Q.3741	Signalling requirements for SD-WAN service
Q.3742	Signalling requirements and data models for SD-DCI service
Q.3745	Protocol for time constraint Internet of things-based applications over software-defined networking
Q.3900	Methods of testing and model network architecture for NGN technical means testing as applied to public telecommunication networks
Q.3901	Testing topology for networks and services based on NGN technical means
Q.3902	Operational parameters to be monitored when implementing NGN technical means in public telecommunication networks
Q.3903	Formalized presentation of testing results
Q.3904	Testing principles for IMS model networks, and identification of relevant conformance, interoperability and functionality tests
Q.3905	Conformance test plan for number portability requirements defined by ITU-T Q-Suppl.4
Q.3906.1	Test scenarios and catalogue for testing fixed-broadband access networks using a model network - Part I
Q.3909	The framework and overview of NGN conformance and interoperability testing
Q.3910	Parameters for monitoring NGN protocols
Q.3911	Parameters for monitoring voice services in NGN
Q.3912	Set of parameters for monitoring next generation network streaming services
Q.3913	Set of parameters for monitoring Internet of things devices
Q.3914	Set of parameters of cloud computing for monitoring
Q.3915	Set of parameters for virtualized broadband network gateway monitoring
Q.3916	Signalling requirements and architecture for the Internet service quality monitoring system
Q.3920	Terms and definitions for conformance and interoperability
Q.3925	Traffic flow types for testing quality of service parameters on model networks
Q.3930	Performance testing of distributed systems - Concepts and terminology
Q.3931.1	IMS/PES performance benchmark part 1: Core concepts
Q.3931.2	IMS/PES performance benchmark part 2: Subsystem configurations and benchmarks
Q.3931.3	Performance benchmark for the PSTN/ISDN emulation subsystem of an IP multimedia system - Part 3: Traffic sets and traffic profiles
Q.3931.4	Performance benchmark for the PSTN/ISDN emulation subsystem of an IP multimedia system - Part 4: Reference load network quality parameters
Q.3932.1	IMS/NGN performance benchmark - Part 1: Core concept
Q.3932.2	IMS/NGN performance benchmark - Part 2: Subsystem configurations and benchmarks
Q.3932.3	IMS/NGN performance benchmark - Part 3: Traffic sets and traffic profiles
Q.3932.4	IMS/NGN performance benchmark - Part 4: Testing of the performance design objectives
Q.3933	Reference benchmarking, background traffic profiles and KPIs for VoIP and FoIP in fixed networks
Q.3940	NGN/IMS interconnection tests between network operators at the IMS 'Ic' interface and NGN NNI / SIP-I
Q.3941.1	Network integration testing between SIP and ISDN/PSTN network signalling protocols - Part 1: Test suite structure and test purposes for SIP-ISDN
Q.3941.2	Network Integration Testing between SIP and ISDN/PSTN network signalling protocols - Part 2: Abstract Test Suite (ATS) and partial protocol Implementation eXtra Information for Testing (PIXIT) proformaspecification for SIP-ISDN
Q.3941.3	Network Integration Testing between SIP and ISDN/PSTN network signalling protocols - Part 3: Test Suite Structure and Test Purposes (TSS&TP) for SIP-SIP
Q.3941.4	Network Integration Testing between SIP and ISDN/PSTN network signalling protocols - Part 4: Abstract Test suite (ATS) and partical Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for SIP-SIP
Q.3941.5	Network integration testing between SIP and ISDN/PSTN network signalling protocols - Part 5: TSS&TP for network integration tests between ISDN-ISDN and ISDN-PSTN over SIP-II NNI / SIP-I NNI
Q.3942.1	Conformance test specification for the terminating identification restriction using IP multimedia core network subsystem - Part 1: Protocol implementation conformance statement
Q.3942.2	Conformance test specification for the terminating identification restriction using IP multimedia core network subsystem - Part 2: Network side; Test suite structure and test purposes
Q.3942.3	Conformance test specification for the terminating identification restriction using IP multimedia core network subsystem - Part 3: User side; Test suite structure and test purposes
Q.3943.1	Conformance tests specification for the originating identification presentation and originating identification restriction using the IP multimedia core network subsystem - Part 1: Protocol
Q.3943.2	Conformance tests specification for the originating identification presentation and originating identification restriction using the IP multimedia core network subsystem - Part 2: Network side - Test suite structure and test purposes
Q.3943.3	Conformance tests specification for the originating identification presentation and originating identification restriction using the IP multimedia core network subsystem - Part 3: User side - Test suite structure and test purposes
Q.3945	Test specifications for next generation network services on model networks - Test set 1
Q.3946.1	Conformance tests specification for the session initiation protocol - Part 1: Protocol implementation conformance statement proforma
Q.3946.2	Conformance tests specification for the session initiation protocol - Part 2: Test suite structure and test purposes
Q.3946.3	Conformance tests specification for the session initiation protocol - Part 3: Abstract test suite and partial protocol implementation extra information for testing (PIXIT) proforma
Q.3948	Service testing framework for VoIP at NGN UNI
Q.3949	Real-time multimedia service testing framework at the user-to-network interface of next generation networks
Q.3950	Testing and model network architecture for tag-based identification systems and functions
Q.3951	Real-time Internet Protocol based on the ITU-T T.38 supporting facsimile service testing framework at the user-to-network interface of next generation networks
Q.3952	The architecture and facilities of a model network for Internet of things testing
Q.3953	VoLTE/ViLTE interconnection testing for interworking and roaming scenarios
Q.3954	oneM2M - Interoperability testing
Q.3955	oneM2M - Testing framework
Q.3960	Framework of Internet related performance measurements
Q.3961	Parameters for bottleneck evaluation of the web-browsing service
Q.3962	Requirements and reference model for optimized traceroute of joint Internet protocol/multi-protocol label switching
Q.3963	The compatibility testing of SDN-based equipment using OpenFlow protocol
Q.4001.1	IMS specific use of session initiation protocol and session description protocol; Conformance testing - Part 1: Protocol implementation conformance statement
Q.4001.2	IMS specific use of session initiation protocol and session description protocol; Conformance testing - Part 2: Test suite structure and test purposes
Q.4001.3	IMS specific use of session initiation protocol and session description protocol; Conformance testing - Part 3: Network side; Abstract test suite and protocol implementation extra information for testing
Q.4002.1	Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing - Part 1: Network side and user side; Protocol implementation conformance statement
Q.4002.2	Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing - Part 2: Network side; Test suite structure and test purposes
Q.4002.3	Originating identification presentation and originating identification restriction using IP multimedia core network subsystem; Conformance testing - Part 3: User side; Test suite structure and test purposes
Q.4003.1	Communication HOLD using IP multimedia core network subsystem; Conformance Testing - Part 1: Network side and user side; Protocol implementation conformance statement
Q.4003.2	Communication HOLD using IP multimedia core network subsystem; Conformance testing - Part 2: Network side; Test suite structure and test purposes
Q.4003.3	Communication HOLD using IP multimedia core network subsystem; Conformance testing - Part 3: User side; Test suite structure and test purposes
Q.4004.1	Communication diversion using IP multimedia core network subsystem; Conformance testing - Part 1: Network side and user side; Protocol implementation conformance statement
Q.4004.2	Communication diversion using IP multimedia core network subsystem; Conformance testing - Part 2: Network side; Test suite structure and test purposes
Q.4004.3	Communication diversion using IP multimedia core network subsystem; Conformance testing - Part 3: User side; Test suite structure and test purposes
Q.4005.1	Conference service using IP multimedia core network subsystem; Conformance testing - Part 1: Network side and user side; Protocol implementation conformance statement
Q.4005.2	Conference service using IP multimedia core network subsystem; Conformance testing - Part 2: Network side; Test suite structure and test purposes
Q.4005.3	Conference service using IP multimedia core network subsystem; Conformance testing - Part 3: User side; Test suite structure and test purposes
Q.4006.1	Communication waiting service using IP multimedia core network subsystem; Conformance testing - Part 1: Network side and user side; Protocol implementation conformance statement
Q.4006.2	Communication waiting service using IP multimedia core network subsystem; Conformance testing - Part 2: Network side; Test suite structure and test purposes
Q.4006.3	Communication waiting service using IP multimedia core network subsystem; Conformance testing - Part 3: User side; Test suite structure and test purposes
Q.4007.1	Explicit communication transfer using IP multimedia core network subsystem; Conformance testing - Part 1: Network side and user side; Protocol implementation conformance statement
Q.4007.2	Explicit communication transfer using IP multimedia core network subsystem; Conformance testing - Part 2: network side, Test suite structure and test purposes
Q.4007.3	Explicit communication transfer using IP multimedia core network subsystem; Conformance testing - Part 3: User side, Test suite structure and test purposes
Q.4008.1	Malicious communication identification using IP multimedia core network subsystem; Conformance test specification - Part 1: Protocol implementation conformance statement
Q.4008.2	Malicious communication identification using IP multimedia core network subsystem; Conformance test specification - Part 2: Test suite structure and test purposes; Network side
Q.4008.3	Malicious communication identification using IP multimedia core network subsystem; Conformance test specification - Part 3: Test suite structure and test purposes; User side
Q.4009.1	Completion of communications to busy subscriber and completion of communications by no reply using IP multimedia core network subsystem; Conformance test specification - Part 1: Protocol implementation conformance statement
Q.4009.2	Completion of communications to busy subscriber and completion of communications by no reply using IP multimedia core network subsystem; Conformance test specification - Part 2: Test suite structure and test purposes
Q.4010.1	Message waiting indication using IP multimedia core network subsystem - Part 1: Protocol implementation conformance statement
Q.4010.2	Message waiting indication using IP multimedia core network subsystem - Part 2: Test suite structure and test purposes; Network side
Q.4010.3	Message waiting indication using IP multimedia core network subsystem - Part 3: Test suite structure and test purposes; User side
Q.4011.1	Closed user group using IP multimedia core network subsystem; Conformance test specification - Part 1: Protocol implementation conformance statement
Q.4011.2	Closed user group using IP multimedia core network subsystem; Conformance test specification - Part 2: Test suite structure and test purposes; Network side
Q.4011.3	Closed user group using IP multimedia core network subsystem; Conformance test specification - Part 3: Test suite structure and test purposes; User side
Q.4012.1	Anonymous communication rejection and communication barring using IP multimedia core network subsystem; Conformance testing specification - Part 1: Protocol implementation conformance statement
Q.4012.2	Anonymous communication rejection and communication barring using IP multimedia core network subsystem; Conformance test specification - Part 2: Test suite structure and test purposes; Network side
Q.4012.3	Anonymous communication rejection and communication barring using IP multimedia core network subsystem; Conformance test specification - Part 3: Test suite structure and test purposes; User side
Q.4014.1	PSTN/ISDN terminal equipment using IP Multimedia core network subsystem; Conformance testing; Part 1: PICS
Q.4014.2	PSTN/ISDN terminal equipment using IP multimedia core network subsystem; Conformance testing - Part 2: Test suite structure and test purposes
Q.4015.1	Interworking between the IP multimedia core network subsystem and circuit switched networks; Conformance testing - Part 1: Protocol implementation conformance statement
Q.4015.2	Interworking between the IP multimedia core network subsystem and circuit switched networks; Conformance testing - Part 2: Test suite structure and test purposes
Q.4016	Testing specification of call establishment procedures based on SIP/SDP and ITU-T H.248 for a real-time fax over IP service
Q.4040	The framework and overview of cloud computing interoperability testing
Q.4041.1	Cloud computing infrastructure capabilities interoperability testing - part 1: Interoperability testing between the CSC and CSP
Q.4042.1	Cloud interoperability testing for web applications - part 1: Interoperability testing between the CSC and CSP
Q.4043	Interoperability testing requirements of a virtual switch
Q.4044	Test suite for interoperability testing of a virtual switch
Q.4045	Framework of network function virtualization automated testing
Q.4046	Interoperability testing requirements of blockchain as a service
Q.4047	Interoperability testing between software-defined networking (SDN) and hypervisor based computing virtualization
Q.4060	The structure of the testing of heterogeneous Internet of things gateways in a laboratory environment
Q.4061	Framework of software-defined network controller testing
Q.4062	Framework for IoT testing
Q.4063	Framework for testing identification systems used in Internet of things
Q.4064	Interoperability testing requirements for a virtualized broadband network gateway
Q.4065	Framework of model network for tactile Internet testing
Q.4066	Testing procedures of augmented reality applications
Q.4067	Signalling requirements for the virtualized network function lifecycle management in a testing environment
Q.4068	Open application program interfaces (APIs) for interoperable testbed federations
Q.4069	Testing requirements and procedures for Internet of things based green data centres
Q.4070	Test suite for interoperability testing of virtualized broadband network gateways
Q.4071	The testing of 3D ultra-high density Internet of things networks
Q.4072	Monitoring Parameters for Intelligent Speech in Future Networks
Q.4073	Framework for interconnection testing of Voice, Video over 5G
Q.4074	Testing of robotics based on a model network
Q.4075	Test specifications for remote testing of Internet of Things using the probes
Q.4100	Hybrid peer-to-peer communications: Functional architecture
Q.4101	Hybrid peer-to-peer communications: Tree and data recovery procedures
Q.4102	Hybrid peer-to-peer communications: Peer protocol
Q.4103	Hybrid peer-to-peer communications: Overlay management protocol
Q.4104	Hybrid peer-to-peer (P2P) communications: Signalling requirements for data streaming service
Q.4105	Hybrid peer-to-peer (P2P) communications: Signalling requirements for feature-based video services
Q.4140	Signalling requirements for service deployment in computing power networks
Q.4141	Requirements and signalling of intelligence control for the border network gateway in computing power networks
Q.4142	Signalling architecture for service orchestration in computing power network
Q.4143	Signalling requirements for cloud-based control plane and pooled user plane of vBNG (virtualized Broadband Network Gateway)
Q.4160	Quantum key distribution networks - Protocol framework
Q.4161	Protocols for Ak interfaces for quantum key distribution networks
Q.4162	Protocols for Kq-1 interfaces for quantum key distribution networks
Q.4163	Protocols for Kx interfaces for quantum key distribution networks
Q.4164	Protocols for Ck interfaces for quantum key distribution networks
Q.5001	Signalling requirements and architecture of intelligent edge computing
Q.5002	Signalling requirements and architecture for media service entity attachment
Q.5003	Signalling requirements and architecture for federated multiaccess edge computing
Q.5004	Signalling architecture of Lite IMS for IMT-2020 networks and beyond
Q.5005	Requirements, framework and protocols for signalling network analysis and optimization in IMT-2020
Q.5006	Signalling requirements for hierarchical network slicing service
Q.5007	Signalling architecture for microservices based intelligent edge computing
Q.5008	Signalling requirements and architecture to support artificial intelligence-based vertical services in future networks including IMT-2020 and beyond
Q.5009	Signalling Requirements and Protocols for enhanced quality assured connections in IMT-2020 network and beyond
Q.5011	Signalling requirements and interfaces of edge-aided energy management agent at intelligent edge computing
Q.5012	Signalling architecture of WLAN access network for interworking with 5G network
Q.5013	Signalling Requirements and Protocol procedures for two-way QoS mechanism between access networks and core networks in IMT-2020 network and beyond
Q.5020	Protocol requirements and procedures for network slice lifecycle management
Q.5021	Protocol for managing capability exposure APIs in IMT-2020 networks
Q.5022	Signalling procedure of energy efficient device-to-device communication for IMT-2020 network
Q.5023	Protocol for managing intelligent network slicing with AI-assisted analysis in IMT-2020 networks
Q.5024	Protocol for providing intelligent analysis services in IMT-2020 networks
Q.5025	Protocol for managing the user plane function in IMT-2020 networks
Q.5026	Signalling requirements and protocol for providing network-oriented data integrity verification service based on blockchain in IMT-2020 networks
Q.5027	Protocol for IMT-2020 network integration with time sensitive network
Q.5028	Data management interfaces for intelligent edge computing-based smart agriculture service
Q.5029	Data management interfaces in digital twin smart aquaculture system with intelligent edge computing
Q.5030	Data management interfaces for intelligent edge computing-based flowing-water smart aquaculture system
Q.5031	Protocol for traffic flow coordination of multi-modality communication
Q.5032	Network coding protocol for network repeaters
Q.5050	Framework for solutions to combat counterfeit ICT devices
Q.5051	Framework for combating the use of stolen mobile devices
Q.5052	Addressing mobile devices with a duplicate unique identifier
Q.5053	Mobile device access list audit interface
Q.100SerSup2	[Withdrawn] Characteristics of speech interpolation systems affecting signalling
Q.100SerSup3	[Withdrawn] Information received on national voice-frequency signalling systems
Q.400SerSup1	[Withdrawn] Line signalling for Dc lines with System R2 interregister signalling
Q.400SerSup2	[Withdrawn] Both-way working of the analogue line signalling version of Signalling System R2
Q.400SerSup3	[Withdrawn] Use of the analogue line signalling version on 2048 kbit/s PCM transmission systems
Q.400SerSup4	[Withdrawn] In-band line signalling for 3 kHz spaced channels
Q.400SerSup5	[Withdrawn] Line signalling (analogue version) with metering
Q.400SerSup6	[Withdrawn] Line signalling (digital version) with metering
Q.500SerSup1	Definition of relative levels, transmission loss and attenuation/frequency distortion for digital exchanges with complex impedances at Z interfaces
Q.500SerSup2	Impedance strategy for telephone instruments and digital local exchanges in the British Telecom Network
Q.Sup1	[Withdrawn] Signalling System No.7 testing and planning tools
Q.Sup2	[Withdrawn] Intelligent network user's guide: Supplement for IN CS-1
Q.Sup3	[Withdrawn] Number portability - Scope and capability set 1 architecture
Q.Sup4	[Withdrawn] Number portability - Capability set 1 requirements for service provider portability (All call query and Onward routing)
Q.Sup5	[Withdrawn] Number portability - Capability set 2 requirements for service provider portabilty (Query on release and Dropback)
Q.Sup6	[Withdrawn] Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series technical reports
Q.Sup7	Technical Report TRQ.2001: General aspects for the development of unified signalling requirements
Q.Sup8	Technical Report TRQ.2400: Transport control signalling requirements - Signalling requirements for AAL Type 2 link control capability set 1
Q.Sup9	Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series Technical Reports
Q.Sup10	Technical Report TRQ.2002: Information flow elements
Q.Sup11	Technical Report TRQ.2010: B-ISDN signalling interworking requirements
Q.Sup12	Technical Report TRQ.2100: Coordinated call control and bearer control signalling requirements - Root-party coordinated call and bearer control
Q.Sup13	Technical Report TRQ.2110: Coordinated call control and bearer control signalling requirements - Leaf-party coordinated call and bearer control
Q.Sup14	Technical Report TRQ.2120: Coordinated call control and bearer control signalling requirements - Third-party coordinated call and bearer control
Q.Sup15	Technical Report TRQ.2130: Coordinated call control and bearer control signalling requirements for leaf initiated join service
Q.Sup16	Technical Report TRQ.2140: Signalling requirements for the support of narrowband services via broadband transport technologies
Q.Sup17	Technical Report TRQ.2200: Call control signalling requirements - Party call control
Q.Sup18	Technical Report TRQ.2230: Call control signalling requirements - Join call service
Q.Sup19	Technical Report TRQ.2300: Bearer control signalling requirements - Root-party bearer control
Q.Sup20	Technical Report TRQ.2310: Bearer control signalling requirements - Leaf-party bearer control
Q.Sup21	Technical Report TRQ.2320: Bearer control signalling requirements - Third-party bearer control
Q.Sup22	Technical Report TRQ.3000: Operation of the bearer independant call control (BICC) protocol with digital subscriber signalling system No. 2 (DSS2)
Q.Sup23	Supplement to ITU-T Q.1901 Recommendation - Technical Report TRQ.3010: Operation of the bearer independant call control (BICC) protocol with AAL type 2 signalling protocol (CS-1)
Q.Sup24	Technical Report TRQ.3020: Operation of the bearer independant call control (BICC) protocol with broadband integrated services digital network user part (B-ISUP) for AAL Type 1 adaptation
Q.Sup25	Supplement to ITU-T Q.2900 series Recommendations: Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface layer 3 - Overview of B-ISDN DSS2 signalling capabilities
Q.Sup26	Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) and signalling system No. 7 (B-ISUP) - Support of services over IP-based networks
Q.Sup27	Technical Report - Overview of Signalling and Protocol Framework for an Emerging Environment (SPFEE)
Q.Sup28	Technical Report: Signalling and protocol framework for an emerging environment (SPFEE) - Specifications for service access
Q.Sup29	Service Modelling: Evolution to the use of object oriented techniques
Q.Sup30	Supplement to ITU-T Recommendation Q.1701 - Roadmap to IMT-2000 Recommendations, Standards and Technical Specifications
Q.Sup31	Technical Report TRQ.2141.0: Signalling requirements for the support of narrow-band services over broadband transport technologies - Capability set 2 (CS-2)
Q.Sup32	Technical Report TRQ.2141.1: Signalling requirements for the support of narrowband services via broadband transport technologies - CS-2 signalling flows
Q.Sup33	Technical Report TRQ.2401: Transport control signalling requirements - Signalling requirements for AAL type 2 link control capability set 2
Q.Sup34	Technical Report TRQ.2410: Signalling Requirements Capability Set 1 for the support of IP Bearer Control in BICC networks
Q.Sup35	Technical Report TRQ.2500: Signalling Requirements for the support of the call bearer control interface (CS-1)
Q.Sup36	Technical Report TRQ.3030: Operation of the bearer independent call control (BICC) protocol (CS-2) with IP bearer control protocol (IPBCP)
Q.Sup37	DSS1 and DSS2 messages and information element identifiers
Q.Sup38	Technical Report TRQ.2600: BICC signalling transport requirements - Capability set 1
Q.Sup39	Technical Report TRQ.2700: Requirements for signalling in access networks that support BICC
Q.Sup40	Technical Report: Reference document on API/object interface between network control and application layer
Q.Sup41	Technical Report TRQ.2003: Roadmap to the BICC protocol Recommendations, BICC interworking Recommendations, and BICC requirement Supplements
Q.Sup42	Technical Report TRQ.2402: Transport control signalling requirements - Signalling requirements for AAL type 2 link control Capability Set 3
Q.Sup43	Technical Report TRQ.2415: Transport control signalling requirements - Signalling requirements for IP connection control in radio access networks Capability Set 1
Q.Sup44	Technical Report TRQ.2800: Transport control signalling requirements - Signalling requirements for AAL type 2 to IP interworking Capability Set 1
Q.Sup45	Technical Report TRQ.2815: Requirements for interworking BICC/ISUP network with originating/destination networks based on Session Initiation Protocol and Session Description Protocol
Q.Sup46	Technical Report TRQ.2830: ATM-MPLS network interworking signalling requirements
Q.Sup47	Emergency services for IMT-2000 networks - Requirements for harmonization and convergence
Q.Sup48	Guideline document for specifying API/object interface between network control and application layer
Q.Sup49	Signalling requirements to support IP telephony
Q.Sup50	Technical Report TRQ.2145: Requirements for a Narrow-band Signalling Syntax (NSS)
Q.Sup51	Signalling requirements for IP-QoS
Q.Sup52	NNI mobility management requirements for systems beyond IMT-2000
Q.Sup53	Signalling requirements to support the International Emergency Preference Scheme (IEPS)
Q.Sup54	Signalling requirements at the interface between SUP-FE and I/S-CSC-FE
Q.Sup55	Signalling requirements at the interface between AS-FE and S-CSC-FE
Q.Sup56	Organization of NGN service user data
Q.Sup57	Signalling requirements to support the emergency telecommunications service (ETS) in IP networks
Q.Sup58	Organization of NGN transport user data
Q.Sup59	Signalling flows and parameter mapping for resource control
Q.Sup60	Supplement to Recommendations ITU-T Q.3610 and ITU-T Q.3611 - Service flows for customized multimedia ring-back tone (CRBT) and customized multimedia ringing tone (CRT) services
Q.Sup61	Evaluation of signalling protocols to support ITU-T Y.2171 admission control priority levels
Q.Sup62	Overview of the work of standards development organizations and other organizations on the emergency telecommunications service
Q.Sup63	Signalling protocol mappings in support of the Emergency Telecommunications Service in IP networks
Q.Sup64	Physical realization of next generation networks
Q.Sup65	Cloud computing interoperability activities
Q.Sup66	ITU-T Q.1740-series - Supplement on scenarios and requirements in terms of services and deployments for IMT and IMS in developing countries
Q.Sup67	Framework of signalling for software-defined networking
Q.Sup68	Technical Report on emergency telecommunication service (ETS) interoperability limitations
Q.Sup69	Framework for interconnection between VoLTE-based network and other networks supporting emergency telecommunications service (ETS)
Q.Sup70	Signalling requirements for IMS and GSM/UMTS network supporting multi-device emergency telecommunications service
Q.Sup71	Testing methodologies of Internet related performance measurements including e2e bit rate within the fixed and mobile operators' networks
Q.Sup72	Signalling requirements for IP multimedia subsystem (IMS) emergency telecommunications service in support of multiple accesses
Q.Sup73	Guidelines for permissive versus restrictive system implementations to address counterfeit, stolen and illegal mobile devices
Q.Sup74	Roadmap for the ITU-T Q.5050-series - Combat of counterfeit ICT and stolen mobile devices
Q.Sup75	Use cases on the combat of counterfeit ICT and stolen mobile devices
Q.Sup76	Common approaches and interfaces for data exchange between the central equipment identity register and the equipment identity register
Q.Sup77	Signalling requirements for parallel service function chaining packet processing