The coders for the "rd-xxx" and "tmn-xxx" bitstreams are run using H.263+ Annexes D and J (with a full-search range of [-16.0, 15.5] for the Annex D motion vectors, relative to the prediction vector). The simulation conditions can be found in q15d13.doc. The "rd-xxx" bitstreams are expected to be used as the "anchors" for experiments conducted for the Tampere Finland meeting. rd-coder-bits.tgz : bitstreams produced by the rate-distortion-optimized coder tmn-coder-bits.tgz: bitstreams produced by the TMN-3.1.1 coder (UBC) rd-coder-info.tgz : info-files including PSNR and bit-rates produced by the rate-distortion-optimized coder tmn-coder-info.tgz: info-files including PSNR and bit-rates produced by the TMN-3.1.1 coder (UBC) Questions about the above files should be directed to: wiegand@nt.e-technik.uni-erlangen.de ---------------------------------------------------------------------------- The coders for the "ubc-xxx" bitstreams are run using H.263+ Annexes D+F+J (with a full-search range of [-32.0, +31.5] for the Annex D motion vectors, relative to the (0,0) vector). The simulation conditions can be found in q15c47.doc. The following four files contain the CIF and QCIF log and bitstream files for fixed-QP testing (from the first table in Q15-C-47). ubc_cif_qp_log.tgz ubc_cif_qp_stream.tgz ubc_qcif_qp_log.tgz ubc_qcif_qp_stream.tgz The following two files contain the QCIF log and bitstream files for varying frame-skip settings (from the second table in Q15-C-47): ubc_cif_qp_fs_log.tgz ubc_cif_qp_fs_stream.tgz An the following four files contain the CIF and QCIF log and bitstream files for subjective testing (from the third table in Q15-C-47): ubc_cif_subj_log.tgz ubc_cif_subj_stream.tgz ubc_qcif_subj_log.tgz ubc_qcif_subj_stream.tgz Questions about the UBC files should be directed to: Michael Gallant Image Processing Laboratory Department of Electrical Engineering University of British Columbia Phone: (604) 822-4988 Fax: (604) 822-5949 http://www.ee.ubc.ca/image/